The Main-Lining Thread

gr865

Well-Known Member
Just a weekly up date, all is well, plants are healthy.
Day 21 of 12/12
Two Mr NIce Black Widows
Two gallon 65/35 Perlite/Coco Hempys.
GH Flora series using Heads modified Lucas formula for Coco.
Start flower at 9 inchs and the plants are at 27" and that is doing some LST to even out the height.

BW1BW1.jpg
BW1 Side
BW1 side.jpg

BW5
BW5.jpg

BW5 Side
BW5 side.jpg

Till next time, keep the sun in your face and your ex's off your ass!

GR
 
Last edited:

gr865

Well-Known Member
The Black Widow looks killer! Can't wait to see the frost production!
Thanks Mo,
Yes just from what I have heard about this strain is that it is dangerous and a massive trich producer.

Mo, a few week or months or hell years back we talked about the branch production at the first node of the Mainlined plant and I don't remember there was ever and answer given. Do you remove that branch or let it produce a cola?
I don't want to take away from final product but I feel it is taking away from upper growth.

So just everyone's thoughts.

GR
 

gr865

Well-Known Member
Nugs said no side growth (he uses single cola dominant plants) only mains.

I left some side growth on a sativa I grew with light dep. It worked great and I got some extra buds.



Here are the secondaries after I removed the mains:



Nothing special - they could have been removed.

Cheers,
Mo
Well today is day 21 so there is no better time to remove them,
How about the lower fan leaves that have no node/branches to support.
They would be the leaves that are on say the node where I am going to remove the secondary branches.

GR
 

Mohican

Well-Known Member
I think Nugs said he removes the fans that hinder circulation. It is so dry here I hardly ever get leaves that are that densely filled in.
 

Mohican

Well-Known Member
Each plant is different. If you have Nugg's pheno of Ace of Spades, the same soil, pots, lights, etc., it makes this process much easier to follow. Any changes to those parameters and you are going to need to make adjustments that work best for your situation.

When I tried my first mainliners I was breaking off growth tips, not sexing first, taking a month vacation away, light dep/revegging issues... You name it, I have screwed it up.

I can't wait to get my grow room set up for Mainlining and LEDs. First I need to get a job!

Cheers,
Mo
 

fishdeth

Well-Known Member
The Phillips CDM was just too dang bright and the plants wouldn't stretch at all so I put the old MH lamp and ballast back on line.
Things are stretching nicely now.
All 3 plants have been topped to 4 even tho one of them is still lagging behind a bit.
20150228_092854_resized.jpg 20150228_092930_resized.jpg 20150228_093005_resized.jpg 20150228_093031_resized.jpg
 

Mohican

Well-Known Member
I have found that the system works better when I top it a little higher up, and I wait until the plant is bigger and exploding with growth to top it. This makes the new tips grow much faster because they are getting the power from a much bigger root mass.
 

fishdeth

Well-Known Member
I have found that the system works better when I top it a little higher up, and I wait until the plant is bigger and exploding with growth to top it. This makes the new tips grow much faster because they are getting the power from a much bigger root mass.
Exactly!
 

gr865

Well-Known Member
Update

Day 28 of 70 under 12/12

Well they say give the bad news first and then the good news will fix it all. Hummmmmmmm?

Ok, today was a flush day!
During the flush I was doing the clones in the solo cup starter hempys. I had just given them their second drinch and places them all on the drainage rack on my work table. "BAM" my table collapsed sending all the clones to the floor and some landed on their little heads, but all came out of their cups and spilt coco and perlite all over the place. I scooped up the clones and placed them back in their cups and tried to get as much coco and perlite that I could. Well now they are not Hempy solo cups, the are just a clones in a coco perlite mix but still in the cups. Will see how it goes, that shit went everywhere. The clones were two weeks old yesterday and I was very impressed with the amout and density of the root mass. Seven of the 8 clones made it, started directly in the solo hempy cups. I did the same thing when I sexed the plants got all 10 clones rooted in straight coco. I like the method but would prefer to have an aero cloner, but just can't justify the cost for the amount of plants I do.

Now for the reason I flushed today, the pH of my rinsate is fine, Going in it 5.8 to 5.9 coming out is 5.9 to 6.0. YEA! Think I got a handle on the coco. The problem and it is inherent with coco is the tendency to hold salts, and since the nute I use are chemical base the salts build up. My ppm going in is approx 850 with each batch of nutes i make up, Each time I check the ppm in the runoff it increases until I flush, I usually wait to flush at between 1300 to 1500 ppm. The salts have been increasing with each watering/nutes, and yesterday when I checked the rinsate it was 1480 so today was a flush day. Now is the time I'm glad I have the drain plug. I take untreated rain water, fill to the top, I have my drain hose tied up so the liquid stays in the bucket. That takes about 3/4 gallon, I let that sit in the bucket for about 10 to 15 minutes to help desolve the salts then I remove drain plug and let it drain rapidly and completely. I do this passing about two gallons thru the bucket. I then treat 5 gallon of aerated rain water with 25 ml silica and 25 ml Cal/Mag. I follow the same method as the untreated water, filling the buckets with the two gallons of treated water, the last fill is drained from the drain tube.
I will begin using nutes tomorrow. One thing I did notice this time is BW1 has tip burn on the very tip of the leaves and BW 5 has some minor clawing. I think it was really time to flush. I have been flushing about every 3 weeks, may make that two weeks and try to control the tip burn and clawing.

Other than that the ladies are doing just fine, I am so impressed with the way the maintain color. Both plants look great.
They are for sure Sativa dominate, trained for 4+ weeks, started flower at 2 inches above the ring or around 10 inches, they are now above 28 inches. I can imagine what they would look like had I not trained them Manifold (mainline) style.
BW 1

BW 1


BW 1

BW 5

BW 5 the canopy's are both equal height.
BW 5


Both of the ladies in the cabinet.


Well thats it for tonight, see you next week with another update.

GR
 
Top