Dosing/Laying Etizolam

CreepyStevie69

Well-Known Member
Welcome!

History: A while back during the Phenazepam craze I laid some on those red and white mint candies for easy storage and dosing. I believe I used MEK as the solvent. It's been (can't believe I'm about to say this, as it seems like yesterday) about 5 years or so, so please forgive me if some of this history is wrong/inaccurate. Anyway, I laid them in 2 mg and 5 mg, I think.

I was going to try the same process with Etizolam 99.5%+ pure powder, with some slight differences, tomorrow. The following is the recipe I was mulling around my head. Any tweaks/suggestions/comments are appreciated and welcomed.

Materials*:
- Etizolam
- Scale
- Ethanol bought from local drug store. Strongest available. I'm choosing this due to availability, ease, cost, and accessibility.
- mL measuring spoons/glass/device
- 1-3cc Syringe
- Desired material to lay final solution

*The above materials are open for discussion to add and/or replace, except Etizolam, however I'm sure this can be used with other benzo/benzo-like materials. Well now that I think about it this same method can be used to lay just about anything small enough if you know how to adjust accordingly.

Procedure:
1. Measure out desired weight of Etizolam. For the sake of this thread weigh out 100 mg. The most accurate scale I have is .01g, of course .001g would be ideal.

2. Next, measure out 50 mL of Ethanol. I've read through other resources/others' experience that Etizolam can be mixed into a 2mg/mL solution. Thus, only needing half the amount of solvent than powder.

3. Pour 100 mg powder into 50 mL Ethanol, stir/shake/mix.

4. Using a syringe suck up 1 mL/cc of solution

5. Squirt solution onto desired dosing material, i.e. candies, blotter, or something rolling around in my head is thick absorbent paper towel squares.

6. Leave to dry/evaporate flat

7. Once the material is dry all that should be left is the Etizolam. If using the paper towel method one can then place the paper towel squares in gel caps.

This is should be enough for 50 2 mg doses. :)

Again, any thoughts would be greatly appreciated. This was just written off the top of my head as a running idea. So, if something needs a second look, tweaking, or if more powder can be mixed into solution leave a reply and let's talk about it. Enjoy. I hope this was informative.

-CS69
 

CreepyStevie69

Well-Known Member
My original plan was/is the candies. People seem to like them better with their eyes. I just get paranoid with how easily they can get mixed up/confused with regular candy. and for the paper towel I figured any powder that would flake off or whatever from the paper towel would just fall into the gel cap holding it. ya dig?? As far as solubility goes... I guess I'll play around a little with ethanol and isopropyl.
 

high|hgih

Well-Known Member
Awesome! gonna have to put some of this into practice with the cheapness and positive effects of etizolam.
Blotters would be great, anyone know a good site where you can get a custom empty print? I only use 1mg dosing. Can see why OP would get powder in order to make 2mg doses seems as apparently they rip ya off a bit with the 2mg pills. Better safe than sorry since I'm sure that'd souley depend on the source.
 

high|hgih

Well-Known Member
Could anyone pm me a good cheap vendor? If it's based in the US that'd be cool too. Either way I just feel like I'm over paying.
~$60 for 100/1mg pellets
 
Top