$5k SCFE Vessels

oilmkr420

Active Member
What up guys. Here I have a vessel used to put in work. I'm talking about the giant 6L vessel rated at 6,000psi. Suitable for subcritical water but would require a stainless steel seal one time crush use I'm thinking. Since water is in more abundance than CO2 and just as environmentally friendly and just as tunable w temp and pressure as co2, the results start going through phases demonstrating solubilities such as ethanol/methanol around 200C and behaves more non-polar the closer to supercritical temp and pressures are approaching demonstrating moderately non-polar hexane and can be tuned by co-solvents in the same fashion as co2. To focus attention at certain targets that wouldn't be obtained w out their use and their is no penalty of use since the solvents are taken out of the equation. What's left is what's been expected from the solvents to pull out and taste preserved. Huge advantages would be obtained not having to buy ice for water hash, just apply overpressure as to raise the boiling point of water, just as vacuum lowers the b.p., overpressure causes the b.p. to be at a higher temperature. The behavior is a phenomena not quite understood or commonly employed. Idk if apex or Eden use H2O as a solvent of choice, this area should be ran w the assistance of a programmable logic controller, as you not want to be anywhere near that searing gas coming outs out cooling phases and automatic valves. But that what makes these stainless vessels so hip and happening technology. Unlike Apex or Eden, I offer the realistic chance for serious stability for the way trends are shifting for the future. These vessels start at $5,000, plc is another $2,000, and the cost of vales and sensors transducers and pumps are what would be needed to complete a SCFE set-up. They are fun operating in a manual mode and have never hooked up the automation part and look forward to it, since I will be having help setting it up. The little one is rated 10,000 psi is no joke and is even more severe service than the giant. It comes from NASA and is made of the most choice materials and rated for such loads, without production costs a factor. Absolutely the best.6_000_psi_10_000psi_vessels.jpg
 

oilmkr420

Active Member
Subcritical water hasn't been employed to recover cannabinoids yet. I hope to be the first to give and locate where the prime temperatures and pressures exist. Knowing what I do about supercritical fluids and the unusual behavior of water as it sweeps through these extreme severe conditions and temperatures between 200C-374C is where these unusual phenomena takes place. At 3,200psi and upwards of 200C, you need the right equipment. I still lack essential parts to make the theory a reality. So thanks to hashmasta-cut, I have my priorities back in order. This project was on the back burner since I was charged w Manufacturing marijuana, which is the same charge as making meth in Ca., and beat the case w out any lawyers or any public pretender representing my ass w a shit load of evidence against me. When I was released 3 days after arrest, I was never told to stop doing what I was doing or I was breaking laws, but the deputies themselves couldn't believe I did what I did from a simple statement legitimizing my efforts. I don't even have a membership to the bar and smiled on my mug shot! That took nerve and these sheriffs not fuck w me now as they know me as the hash man in this area. I told them " It's CO2Extractor, Sir."
 

oilmkr420

Active Member
I deleted so much proof after I finally got my shit back from LASD. My phone was factory reset out of paranoia, made some decisions that were irreversible, and I openly challenged anyone who thought they had what it took to show me a better extract, to bring it. Not one person out there has taken me up on that request to show me anything I haven't seen before, which is a better extract. It was always them saying "that was the best dab in my life" having seen people hilarious reaction of their eyes fluttering like there busting a nut in they pants, and never once has someone met w me and left thinking they had the best extract around. Only solidifying what I claimed, and that was butane just aint got what it takes to beat what I bring to the table. So unless your the person who is going to show me a better extract, I'd shut up and head to the back of the bus.
 

oilmkr420

Active Member
Anyone w cash required for the purchase of the listed title of this thread can PM me for consultations. Provided travel expenses are met, solvent costs for demonstrating the unit taken care of, plant matter provided, I will travel throughout the state of California to show any prospect, I know my shit.
 
Ok, I will take your challenge. Email me your phone number to [email protected] . We can talk and arrange a setting.

If you are serious I will arrange a competition within 4 months. I will even fly to California to make it easier on you, We can photo/videographically document everything that transpires.

I will make extracts using pure CO2, and even extracts at some mixture with a cosolvent you choose. You dont even have to tell me what solvents you want to add, surprise me.

Whatever you email me and I you, minus any identifying information, will be posted on the forums as well.

This is a serious offer, I am calling your bluff on the challenge.
 

oilmkr420

Active Member
Yeah whats up w the patent numbers? I found nothing matching that. You guys are going to be let down by pure co2 and putting the bets on esthetics. Blindfolded is the best way to go at it. Whats up w Graywolf? Will he be a respected judge for this event? Anyone want to be a panel judge should get in touch w either of us for this Co2 Challenge. Idk, I think it was a set-up for serving a patent infringement case, but I got more time than money, nothing to lose, a lot to prove, and a total automated process, w polar solvents introduced at high pressure, air driven liquid pumps, programmable logic controlled, w pressure sensors, 12v valves, back pressure relief valves, check and ball valves as well. Not to mention the original theoretical new innovations I have prototyped and look forward to utilizing subH2O as a solvent for cannabinoid recovery in Green Technology. Just as environmentally friendly, you ain't got your patents as tight as the intellectual property I own, which isn't at all what your claims and patents cover. But shoot the real numbers.
 

francy420

Well-Known Member
Quit talking for now. PLEASE!!!!! Someone has accepted your challenge. Take it, and let the outcomes speak for themselves.
 

BWG707

Well-Known Member
The thing I don't understand is that if you are the "highly skilled" oil maker that you claim to be, you should have no problem at all to come up with the money you keep asking to be donated to you. Why don't you just start small, selling to some dispensaries then keep rolling that cash over until you are able to purchase what you want instead of bumming money from others. Certainly someone with the skills you process could quickly make some start up capital.
 

Fadedawg

Well-Known Member
Yeah whats up w the patent numbers? I found nothing matching that. You guys are going to be let down by pure co2 and putting the bets on esthetics. Blindfolded is the best way to go at it. Whats up w Graywolf? Will he be a respected judge for this event? Anyone want to be a panel judge should get in touch w either of us for this Co2 Challenge. Idk, I think it was a set-up for serving a patent infringement case, but I got more time than money, nothing to lose, a lot to prove, and a total automated process, w polar solvents introduced at high pressure, air driven liquid pumps, programmable logic controlled, w pressure sensors, 12v valves, back pressure relief valves, check and ball valves as well. Not to mention the original theoretical new innovations I have prototyped and look forward to utilizing subH2O as a solvent for cannabinoid recovery in Green Technology. Just as environmentally friendly, you ain't got your patents as tight as the intellectual property I own, which isn't at all what your claims and patents cover. But shoot the real numbers.
Truth is shorter than fiction. Why is more than, "I accept", necessary when your bluff has been called point blank?

The challenge accepted, wasn't who has the greatest proclivity for circumlocution, it is about who delivers the best empirical product results when the two SCFE CO2 processes are physically compared face to face in a controlled equal contest.

I have personally experienced what JYNdustriez is capable of, so my suggestion is that you don't take JYars challenge lightly, but if you want to come off as anything but the wind hence forth, you have little choice but to put up or shut up lil brother.

If you do accept, I would encourage you to be prepared with your full bag of tricks, cause you can still end up looking like the sound of the wind through the rigging anyway.

Consider that with the volumes you've shared describing how much more evolved and sophisticated your processes and products are, you must not only win, but soundly trounce JY.

You need to wipe the smile off his face and send the poor brother home sniveling with his tail tucked, to live up to the legend you've painted. The major end game inconvenience of hoopla and fanfaronade as ah sees it, because it is not only possible to corner something meaner than you are, but just whupping the opponent falls so short of the expectations that you've created in the eyes of the audience.

The gauntlet has slapped across your face and been thrown at your feet. What are you going to do bro?
 

francy420

Well-Known Member
Yeah all this talk is making me tired. I have seen this call out all over. Only response from oilmakr has been more crap about how awesome he is. Go play with your fucking horse you douche.
 

oilmkr420

Active Member
Truth is shorter than fiction. Why is more than, "I accept", necessary when your bluff has been called point blank?

The challenge accepted, wasn't who has the greatest proclivity for circumlocution, it is about who delivers the best empirical product results when the two SCFE CO2 processes are physically compared face to face in a controlled equal contest.

I have personally experienced what JYNdustriez is capable of, so my suggestion is that you don't take JYars challenge lightly, but if you want to come off as anything but the wind hence forth, you have little choice but to put up or shut up lil brother.

If you do accept, I would encourage you to be prepared with your full bag of tricks, cause you can still end up looking like the sound of the wind through the rigging anyway.

Consider that with the volumes you've shared describing how much more evolved and sophisticated your processes and products are, you must not only win, but soundly trounce JY.

You need to wipe the smile off his face and send the poor brother home sniveling with his tail tucked, to live up to the legend you've painted. The major end game inconvenience of hoopla and fanfaronade as ah sees it, because it is not only possible to corner something meaner than you are, but just whupping the opponent falls so short of the expectations that you've created in the eyes of the audience.

The gauntlet has slapped across your face and been thrown at your feet. What are you going to do bro?
Meet both of you in Costa Mesa. We do have people willing to donate Jasons ticket to Cali,why can't he be their when you are?Better yet, why don't you save some of the Tea that we will try on your visit to Costa Mesa. I do respect your knowledge in the art as your education is inspiring to me, but I have a feeling since the low pressures and temperatures do an excellent job preserving taste, fragile molecules, and the high is well replicating the matrix. The temperatures that Jason work w are beyond what's needed for product purity. The work done here in the high temperature and pressure is going to dissolve more cannabinoids, at the double edged sword of undesired compounds of interest like wax and ballast now a part of the extract and unable to separate w winterization. So selectivity is lost in exchange for high yields. So I not worry what he will bring to the table on the day this decides to go down. So confident I am in my ability and product that I haven't any pictures for. Graywolf kit about Costa Mesa. I will meet up for sure.
 
Top