Hi guys,

iam planning to grow my first MJ plant, but i was wondering... is it possible to make oil from undried marijuana buds?

Thanx

Why make oil with your buds, maybe the moldy ones, but save your buds for smoking , and use what is left along with any males to make the oil.
Just don't use the roots ( I was told not to use them as they may make you sick ).

I have tried the butane way and I find it OK, or so so; but I am going to try this way (below) this week with some males that I am drying out. Waste not-Want not...

Step 1

You'll need to chop up your weed and pick apart the buds until it looks like grass clippings. Remove any seeds, they have their own oils which we don't want. Dump the powdered pot into the mason jar and pour in just enough grain alcohol so the weed particles float freely in the mixture. Place the lid securely on the jar and shake a few times.

Let this mixture sit for a few hours, shaking it every once in a while. The alcohol should have turned a dark green color and when shaken should form colorful, oily bubbles on top.

Place the sturdy cloth over the metal container and press the cloth down to form a funnel. Carefully pour the contents of the mason jar onto the cloth which is in the metal cup. Make sure to get most of the weed particles out of the jar. Gather up the edges of the cloth and squeeze the remaining liquid out of the lump of weed into the metal cup.

Step 1

You should now have a quantity of dark green liquid in your metal measuring cup. It is possible to extract more THC oil from the remaining pot. I recommend performing Step 1 a second time immediately after completing it the first time. No sense throwing away the good stuff. Dump the pot from the cloth back into the mason jar and repeat step 1. You now have twice as much liquid in your metal cup upon repeating the first step.

Step 2

Be sure to use an electric stove in this step! I am going to use a hot plate out side away from anything (because it will burn down your house if you are silly)

Take the metal cup containing the green liquid over to the stove. Turn one of the electric eyes on LOW setting and place the metal cup on that burner. I highly suggest using the fan over the stove to remove the alcohol vapors during this entire step. Watch the liquid closely. It should only boil slightly, never raise the burner temperature above MEDIUM LOW. We need the liquid to cook down until it's slightly thick. This may take some time but be patient.

Once the liquid starts to thicken and turn darker, remove it from the heat. Never let it get too thick or it'll be too difficult to work with. If you do accidentally make it too thick, just add a small quantity of the grain alcohol to the metal cup and swirl it around till it's thinner.

Let it cool down to room temperature inside the metal cup. It should be runny enough to be poured into the bottle easily. You now have your final product: THC oil. It's necessary to have some grain alcohol left in the resulting liquid so it's easy to work with. This will not affect the potency of the oil.

Once it's evaporated test to see if it's too thick. If it is, pour a small amount of grain alcohol in the metal cup and mix. Pour the liquid into your bottle.




peace

__________________

That is how I started making hash.

I really like the butane way better. I would post it up but I cant seem to be able to post more than a few sentances.

test

__________________
My Signature

is the answer "yes"

__________________

I had some real nice head oil the other day, it was red, not green. dose any one know why this is??

this is pretty dumb but, how do you consume the oil?

AK47: I was boiling down some oil from some god plants the other night and when it was warm it was blood red, but when it cooled, it looked like your normal hash oil. Not sure why it turns red.... but it was different.



TheUsedlabel: well you can smoke it by making a digger ( a garbage bag tie with the cover burned off, so all that is left is the wire) and dip it in to the oil to get a toke; then you can use a torch and knife (you can use a spoon also) and lay the toke on the knife (not when it is blood red hot) and inhale the smoke into your lungs with a tube.

Or get a pop bottle and cut a hole large enough near the bottom to get a smoke into with no problem, but not to big.
Take a toke out with the digger, and lay it on a smoke (the hot burning end) and put the hot end (you will notice a lot of smoke coming off the end) into the hole of the bottle with its top on (or you will lose the smoke), and allow it to collect the smoke. When it has stopped smoking (burning up the oil); remove the smoke, cover the hole with your hand, open the bottle, and such the smoke down into your lungs. Repeat until all there are high.

You could also, smear it onto a rolling paper, and roll it up with some bud.



peace

__________________

this might sound dumb but what are some names of grain alcohol.

No such thing as a dumb question, Bro.

Take a needle or other thin instrument and smear a small amount on a rolling paper. Not too much ... don't want to ruin a good paper. Then put some bud into the paper just like you were going to roll a joint. Before you roll that oil treated joint, sprinkle a little kief in there too. Roll it up, take a couple of hits and watch your face melt.

Vi