Recent content by Victor6634

  1. Victor6634

    Best LED for a 5x5 spread?

    Also checkout pacific light concepts you can diy a awesome light for around $800
  2. Victor6634

    Diy [Rdwc] Question

    just make sure you use big enough containe at least 10 gallon. Netpot you would be fine with a 10 inch I only use 6 inch don’t forget your roots will be in container so the larger the better 10 - 20 gallon personally I would go with the 20 gal
  3. Victor6634

    5x5 tent setup

    The new chilled led 660 or pacific light concepts photo boost strips
  4. Victor6634

    SA indoor noob needs help choosing COBs

    Checkout Cobkits.com a lot better cobs very affordable @CobKits
  5. Victor6634

    DIY with Quantum Boards

    http://cobkits.com/product/slate-2-heatsink-for-quantum-board-copy/
  6. Victor6634

    DIY with Quantum Boards

    I ended up getting my last 3 qbs and heatsinks from Cobkits because HLG didn’t have heatsinks wish they could figure out how to keep stock on hand it very annoying they have great product but stock is always an issue
  7. Victor6634

    DIY with Quantum Boards

    Lowes is like $25 for 1/2x1/2x1/8 for 8 foot
  8. Victor6634

    Trubleshoot Suggestions on a Vero 29 Setup (won't turn on)

    Sorry I was looking at max output volts
  9. Victor6634

    Trubleshoot Suggestions on a Vero 29 Setup (won't turn on)

    No problem there since they 36 volt forward 216 volts fits very well on driver
  10. Victor6634

    Trubleshoot Suggestions on a Vero 29 Setup (won't turn on)

    Are they the b,c or d because they range from 36 , 50 and 70 volt forward current
  11. Victor6634

    Trubleshoot Suggestions on a Vero 29 Setup (won't turn on)

    You said you unhooked the main leads how were they connected wagos or tinned ? Being on floor shouldn’t matter. Do you have meter to check if there is power coming out leads going to cobs?
  12. Victor6634

    Trubleshoot Suggestions on a Vero 29 Setup (won't turn on)

    I would double check all the wires going to cobs first and go from there all it takes is one wire being loose or not making good contact also double check that it is all + to -.
  13. Victor6634

    How much light do I need?

    I would go with Vero setup much better light
Top