Recent content by Spuzzum

The final version....

And seeing how the 3 metal locking clips in the Easy Valve filling chamber aren't actually needed with this mod.. I'm guessing they're only needed with the actual Volcano, but the stainless steel sleeve still locks into place without them. The system seems to have 3 metal clips that can be...

Better yet... Puff has guys who do custom glass blowing, and they also sell glass parts.. like a glass 45mm female joint that can be used instead of a DeluxeDaddy bowl.. using the right epoxy. Apparently JB Weld is what I should have bought. http://www.puffpipes.ca/glass-supplies.html

btw... that threaded male part that the bowl attaches to.. I guess can be called a bushing, but not necessarily the reducer type bushing. Though that would work too. Either the proper male part that fits the DeluxeDaddy bowl, a 1" stainless steel bushing, or a 1" stainless steel nipple and nut...

Scratch that... fan 3 (fastest) is just as good for vapour density, and only takes 45 seconds with the dust filter. :)

My place gets so damn dusty, and there's no dust filter in the Extreme Q.. so I cut and taped my own. It takes a 2' bag 30 seconds longer on fan 1 (1:45), but that's ok.. the longer it takes, the denser the vapor. I think the sheet used to be from a box of disinfectant wipes that dried out.. no...

Done deal. Cleaner with the threaded sleeve as well.

I wound up sacrificing one of my whips... took the threaded male part off by smashing the fuck out of it. It was a problem piece anyway.. after cleaning the damn thing, the whip hose would never stay on the nipple anymore.. think they used glue in the first place. I just need to grind/sand the...

Crap.. just realised this Goop's only good to 150F. Same as the Gorilla Glue. Need something capable of +500F that's non-toxic after curing. Maybe getting the shop to order in that threaded part would be the better idea.

Well... the local bong shops didn't have the threaded nipple, but they could have ordered it in.. I didn't want to wait. Home Depot had pieces with the correct threading, but they were 4" long.. and solid steel, not stainless. I considered Gorilla Glue, but couldn't find documentation stating...

Well like I said in earlier posts above.. I can't blaze anymore.. my throat can't handle the heat, and because of where I'm living.. it's a non-smoking building, which is the trend these days. At least in my city. Vaporizers are fine though. As for it being a hassle... I don't think so.. not...

I didn't like the way in which you need to shove the bag's mouthpiece into the tube, then pull it off when done.. then plug it with your thumb. I specifically wanted a Volcano valve bag system, and the Easy Valve was not only easier to work with, but I kept reading the Solid Valves kept getting...

Cheers. I've already figured out a 3rd and final draft.. lol. The plastic housing for the Easy Valve that I bought originally, I just used the bottom chamber.. positioned upside down, then placed the bottom part of the complete chamber.. ie: with the metal sleeves and such, on top of the upside...

That's it. Pretty easy. The steel bowl can still be pushed out through the bottom as usual. The pins should stay in place. Also.. i tried this using the Extreme's 'Tuff Bowl'.. all encased in silicone, but the air flow was too narrow.. weak clouds in the bags and barely cooked the cannabis. the...

Well.. just did an upgrade, allowing better access to the screen, as well as the ability to remove the steel sleeve of the bowl without having to remove/replace the silicone tape. I originally bought the plastic housing for the Easy Valve.. just the plastic replacement, no metal parts included...