Could i get an opinion on these cree strips vs fstrips vs qb 120x4 in a 32”x32” soil grow. I currently am running samsung f strips
An i saw these cree strips
Cost for the fstrip is 32.00 cost of the cree are 10.00 cost og qb 4x120 boards would be 120.00 then of course cost of driver...
Could i get an opinion on these cree strips vs fstrips vs qb 120x4 in a 32”x32” soil grow. I currently am running samsung f strips
An i saw these cree strips
Cost for the fstrip is 32.00 cost of the cree are 10.00 cost og qb 4x120 boards would be 120.00 then of course cost of driver.
Also...
Has anyone ever used these cree strips from cutter <—- i hope thay doesnt like violate the rules but im sure i have seen that name here before. I was just trying to compare these to the fstrips. I have one fstrip build and i love it but they are up to 32 bucks apeice and these are less money and...
So that would work better than say a 240-24 v
i appreciate the help gentle men i will pit this up for you to see as i thing i found my stiff im gonna use a 240-1050 A as rhe voltage range is between 114-225 so for the 8 strips i got
23v x 1.05 = 24.15 v
X 8 = 193v with room for 2 more strips if...
Ill say they look great are the strip running in series or parallel. Im gonna use 8 f series 23v single strips says min amp1.12 giving me 204 watts minus 2-4 for driver i would like to push a little to 1.2-1.5 amps but your 200 watts looks great. But mostly are you in series or parallel
Well yeah thats sort of the point of the whole queastion what driver matches 8 of the f strips any suggestion. Or..... well thanks Shimz for at least giving my something. Ill keep looking. I just want to know what driver will effectivly piwer 8 f strips in series if poss
In the case of the f strips my build will be 24x24 covering a 35x29 in area so shadowing and wall distance aint an issue. Nor will spacing on my propsed light bar. Each strip will consume 2.75 in. And the edges of alu panel will be covered by 1/2 in aluminum L channel - my issue is being...
I appreciate the feedback but at the moment hotspots are last in my list I was hoping some-one would recommend a/ the proper driver for the f- series strips i pictured above. And if anyone had an opinion on the 1ft vs the 2 ft strips that would be awesome I dont mean to disregard the comments...
Well thats interesting i had thought the strips would alleviate that but thank you. What driver would you use for 8 of eithet of those strips and is 8 enough for 7 sq ft
How about
What would you say to either of these vs the bridgelux and i what driver would you think works best. I almost like the 10 inch ones best as they can be pushed harder but im not sure about coverage. And I appreciate you helping i dont know much about building my own light and i have...
When you say wire 2 in series and 6 in parralel do you mean to run a sort of hybrid parrelel and series set together? I ambguesing that 12 is to manybfor ine driver??
what driver would you suggest for 10 of the bridgelux
BXEB-L0280Z-35E1000-C-B3
So i got the imfo i have from digikey i just put the part number above in and came up with info i sent - i couldnt get the data sheet to open ( digikey website doesnt cooperate with my iphone so well) but they are 6.50 each compared to 15.50 for f strips - do you think 5...