Page 1 of 2 12 LastLast
Results 1 to 10 of 11
Like Tree3Likes
Marijuana Plant Problems

Why are my stems always so thin?

in the

The Grow Room

forums; I had a white widow plant growing about a month ago, I gave it too many nutes and it died ...
  1. #1
    Learning How To Roll Learning How To Roll UKPR0's Avatar
    Join Date
    Apr 2012

    Posts
    32

    Default Why are my stems always so thin?

    I had a white widow plant growing about a month ago, I gave it too many nutes and it died (or so I thought, as it's still weall alive in the garden somehow) Whenever I exposed it to any natural wind it blew right over because I was growing it indoors with a tiny 12 volt fan blowing on it. Now it's out in the garden the stem has thickened and it can stand by itself so that's okay.

    I now have 3 white widows and 3 holy grails growing in my DIY closet under a standard 40watt CFL (pathetic I know but I can't afford a better bulb right now) with a homemade hanger made from a sheet of aluminium I bought on fleabay and the same 3 speed PC fan bodged up to a 12v power supply. They are only around 2-3 weeks in (I don't keep count) so you'd expect the stems to be thin, but I don't want them to get to a decent size and start budding only to fall over under the weight.

    Am I just being silly and over time they will thicken? Or do I need stronger wind stimulation? The current fan is gently blowing on them, so they wave gently but it's not hurricane wind speeds..

    Cheers

  2. #2
    Learning How To Roll Learning How To Roll UKPR0's Avatar
    Join Date
    Apr 2012

    Posts
    32

  3. #3
    Veteran Smoker Mr. Ganja nick88's Avatar
    Join Date
    Jan 2010

    Posts
    1,812

    Default

    As long as your plants are moving you should be fine.

  4. #4
    Super Stoner Mr. Ganja *BUDS's Avatar
    Join Date
    Dec 2010

    Posts
    5,742

    Default

    You need to get the cfl closer 6" and cool it down with an exhaust fan.
    cindysid and nick88 like this.

  5. #5
    Stoner Stoner cindysid's Avatar
    Join Date
    May 2010

    Location
    Florida
    Posts
    977

    Default

    Your light should be about 1 1/2 in above the plants.

  6. #6
    Learning How To Roll Learning How To Roll UKPR0's Avatar
    Join Date
    Apr 2012

    Posts
    32

    Default

    Quote Originally Posted by *BUDS View Post
    You need to get the cfl closer 6" and cool it down with an exhaust fan.
    So I should lower the hanger, okay - As for an exhaust port, The outsides of the unit are cardboard covered in kevlar sheeting, should I cut a hole in one of the panels and push the fan into that? Would that work? And if I do that, then I'll have no fan blowing in the plants so should I get another for the exhaust port? I know I've got more of those fans so it shouldn't be a massive issue

  7. #7
    Veteran Smoker Mr. Ganja nick88's Avatar
    Join Date
    Jan 2010

    Posts
    1,812

    Default

    Quote Originally Posted by UKPR0 View Post
    So I should lower the hanger, okay - As for an exhaust port, The outsides of the unit are cardboard covered in kevlar sheeting, should I cut a hole in one of the panels and push the fan into that? Would that work? And if I do that, then I'll have no fan blowing in the plants so should I get another for the exhaust port? I know I've got more of those fans so it shouldn't be a massive issue
    You can put a passive intake at bottom, an exhaust fan near top and leave the 1 you have on plants where it iss.

  8. #8
    Stoner Stoner Sir.Ganga's Avatar
    Join Date
    Feb 2012

    Posts
    731

    Default

    40 watt cfl??? You will never get a good thick stock with that amount of light. Address theissue it doesnt matter how much wind you have if they cannot grow.

    As long as you see movement your air movement is fine, look at lighting.
    spitsbuds likes this.

  9. #9
    Teaching How To Roll Mr. Ganja ru4r34l's Avatar
    Join Date
    May 2011

    Location
    Canada
    Posts
    1,521

    Default

    Wait until you can get more lighting, 40W is not enough, are you using an incandescent bulb or cfl?

    regards,
    I AM CANADIAN

  10. #10
    Mr.Ganja Mr. Ganja Slipon's Avatar
    Join Date
    May 2012

    Location
    Scandinavia
    Posts
    3,131

    Default

    atelst get some chep fluorescent tubes or a 125w clf ..

    and you will need even more when you want to flower em ..

    sumthing like this:

    cfl-colours__54738.jpg or neonkit-megalux-22-000-lumens-220w~1242_1.jpg


    2-4 inches away ..
    Take my advice !! ... I dont use it anyway ...

    Jorge Cervantes
    :Marijuana lethal dose = not having any, that will kill you !!

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •