Great looking panel you got there Stardust....where can i buy one?![]()
Now just missing a bit of green to go underneath...![]()
Well-well ....
Time has come for another led grow ....
Let me show you folks, some details :
The space : Silverbox Evolution Grow-tent 1 x 1 x 1,6 m ( ~ 3x3x5 feet )
P3016181.JPGP3016182.JPGP3016168.JPGP3016172.JPG
Exaust : S&P TD Silent 100/160 with selection switch ( set at 100m3/h )
Act.Carbon Filter: CAN
Other :UVC sanitising lamp ( for pre/post cultivation sanitising )
P3016170.JPG
The light :
1x GD-SDS Box Led grow system .
P3016176.JPGP3016178.JPG
Which features :
-36 x Osram Oslon SSL 80 leds
( 24x Warm White 2700° K LCW CQ7P.CC & 12 x Hyper Red 645-660 nm LH CP7P ).
-3x Recom RCD-48 -07 drivers .
-2x 80 mm_3000rpm_Industrial Quality fans .
Each fan => 30-57 Volts operating range . ~1.75 Watt (48 V).Flow:1.027 m3/min (48 V).Noise: 32.11 dB (48 V).
-MeanWell SE-350-48 main PSU .
-200x160x40 mm 1050 AA heatsink .
-Analog Dimming Control ( 200-710 mA ).
-Power Range *at plug.PSU_Bucks_Fans_leds :
22 Watts *leds at 200mA/fans at lowest setting .
100 Watts *leds at 710 mA/fans at max setting .
-'Thermal Copper Pour' enhanced metal core pcbs.
-Corrosion resistant construction,offering durability to environments with lots of
water vapours and /or high humidity .Resistant to fertiliser/salt/pH regulators & other chemicals spills /droplets/sprays ,used commonly at plant cultivation.
-Main PSU Fan Control :
PSU can supply led box fans , from ~39.8 Volts up to ~ 57,5 Volts ...
(Buck-drivers need minimum ~37 Volts to drive the 36 Oslons ... )
(Psu has it's own cooling fan also ,automatic switched on /off depending on PSU operational temps... )
At 39.8 V ,fans work really silent ...
At 57.5 V fans are kinda noisy !!!
Set a sensor ,at middle fin channel (no rotating fan-blades above it ) of heatsink,
approx above middle mcpcb ....
P3016169.jpg.....
-Ambient temp : ~ 18.5 °C
-Leds driven at 710mA.
Heatsink temps when :
Fans working at most silent (s_lowest ) setting (39.8 V ) : 23.8-23.9 °C
Fans working at "normal" setting (48 V ): 23.3-23.2 °C
Fans working at max setting (57.5 V ): 23.1-23.0 °C
P3016173.JPGP3016175.JPGP3016180.JPG..
So .....
Worst case :....... Heatsink gets ~5.5 °C above ambient temperature ,leds driven at 710 mA !
To be continued ....
Last edited by stardustsailor; 03-01-2013 at 03:59 AM.
Vi Veri Veniversum Vivus Vici
Great looking panel you got there Stardust....where can i buy one?![]()
Now just missing a bit of green to go underneath...![]()
Indoor Grow - http://www.rollitup.org/led-other-li...cus-light.html Cabinet Grow - http://www.rollitup.org/led-other-li...ganic-sog.html
Amazing project~ I am most curious about the size of your LED chips, will it be burnt if you continue running them at 710mA?
Now just missing a bit of green to go underneath..
Soon...
Vi Veri Veniversum Vivus Vici
I can wait.....![]()
Indoor Grow - http://www.rollitup.org/led-other-li...cus-light.html Cabinet Grow - http://www.rollitup.org/led-other-li...ganic-sog.html
After ~ 50.000 Hours of operation ,output power might drop around 70-75 % of initial power ....
-Driven at 710 mA ...& cooled the way,they are cooled right now .
led max 1.jpgled max 2.jpg
Last edited by stardustsailor; 03-01-2013 at 01:49 AM.
Vi Veri Veniversum Vivus Vici
What I've been waiting for friend... Now's the time to reap what you sow...
more sun-like the light of your new panels..i wish you all the best sailor!
Sun ...
....
Here ,I come ....
Vi Veri Veniversum Vivus Vici
Bookmarks