1st grow DWC, x2 150 watt, attic grow, flowering

ONe of the issues i had with making it stealth was the noise of the exhaust and intake fans. they wern't that loud but they make what ever they're bulted to vibrate .....
to solve this issue i suspended the fans in the air using bungie cords. then i wraped the intake fan with a thick blanket which took the noise completly away
100_3534.jpg100_3538.jpg100_3539.jpg100_3533.jpg


Here is the light system im using 150 watt hps from sun sytems
150 watt hps.jpg
and im using the full House & Garden nutrients
house-and-garden-nutrients.jpg

for air circulation im just using a basic fan that turns side to side .....

to regulate the temperature during the cold winter months i used a 60$ heater with a thermostate at home depot. so if it goes 3 degrees above the set temp it will shut off. or if it drops -3 degres from the set temp it will turn on
heater.jpg

OOOOk Now for the fun part. I started FLowering on the 22th of december so right now they are on their 7th week of 12/12. throught the entire grow iv been following the 6 wk flower cycle from House and Garden hoping for a quick harvest not understanding each strain matures at different times. so when i finished up the 6th week i thought i was ready so i flushed with straight ph'd tap water for a little over a week. i then realized the whole mature not mature and how much each strain varies lol. Anyways here is pictures after the 1 wk flush..........
100_3575.jpg100_3576.jpg100_3577.jpg100_3578.jpg100_3579.jpg100_3583.jpg100_3584.jpg100_3582.jpg100_3581.jpg100_3580.jpg100_3590.jpg100_3589.jpg100_3592.jpg100_3587.jpg

so i found out that Dj Short flow is a multi harvest strain so i can pull from it a couple times. the only problem i was planing on drying the nugs in the grow room since its smell proof as well as dark ( no light leaks). so i need to make a dry box now im designing one atm with a mini computer fan and a rubbermade container or cardboard box. Does anyone know if it would be better to use a cardboard box for drying over a plastic rubbermade ? for humidity factors and what not?

anyways here is how i made the exhaust fan .. Pc fan + old cell phone charger splice the lines and connect the ground and the supply as so

100_3595.jpg100_3593.jpg

Since the Plants wern't ready just yet i quit the flush and went back to week 8 of nuts. so i just took these pictures just a min ago. these are after a full wk back on the nuts. let me know what you think.
100_3612.jpg100_3598.jpg100_3599.jpg100_3600.jpg100_3601.jpg100_3602.jpg100_3603.jpg100_3604.jpg100_3605.jpg100_3606.jpg100_3608.jpg100_3610.jpg100_3611.jpg100_3597.jpg

here is a couple more shots
100_3622.jpg100_3620.jpg100_3619.jpg100_3618.jpg100_3617.jpg100_3616.jpg100_3613.jpg100_3615.jpg100_3614.jpg

Originally Posted by greentiger

so i found out that Dj Short flow is a multi harvest strain so i can pull from it a couple times. the only problem i was planing on drying the nugs in the grow room since its smell proof as well as dark ( no light leaks). so i need to make a dry box now im designing one atm with a mini computer fan and a rubbermade container or cardboard box. Does anyone know if it would be better to use a cardboard box for drying over a plastic rubbermade ? for humidity factors and what not?

anyways here is how i made the exhaust fan .. Pc fan + old cell phone charger splice the lines and connect the ground and the supply as so

100_3595.jpg100_3593.jpg

Anyone have advice out there ? bump bump