New Room Construction 8'x7'x9' 1000w - Page 3

cain129 · #21 07-14-2009, 07:42 PM

Sup good fellows!!!

Not much going on right now but I did manage to get the veg and mother tent erected. I wasn't really sure how to configure the space with the shelf. I really wish it was down along the right side instead of the back wall. But, anyhow, I decided to keep it simple with some tape and Velcro. This set up is quick and easy. I will be able to change it as I figure the best solution over time. Look at little pretty woman! the buds are so pretty but she still has a long way to go or she's a late bloomer.

LOL!

Pic one - Again, my boy. Holla! the tent is pulled back and there is another grey backing that overlaps it you can't see in this pic. It keeps the light from penetrating into the bloom room.

Pic two - quick shot that shows the veg, clone area with the areaocloner on the right, mother area on far left (first pic) and veg in the center

Cheers,
Cainnabis

bryant228 · #22 07-17-2009, 03:28 PM

Quote:

Originally Posted by cain129

Sup good fellows!!!

Not much going on right now but I did manage to get the veg and mother tent erected. I wasn't really sure how to configure the space with the shelf. I really wish it was down along the right side instead of the back wall. But, anyhow, I decided to keep it simple with some tape and Velcro. This set up is quick and easy. I will be able to change it as I figure the best solution over time. Look at little pretty woman! the buds are so pretty but she still has a long way to go or she's a late bloomer.

LOL!

Pic one - Again, my boy. Holla! the tent is pulled back and there is another grey backing that overlaps it you can't see in this pic. It keeps the light from penetrating into the bloom room.

Pic two - quick shot that shows the veg, clone area with the areaocloner on the right, mother area on far left (first pic) and veg in the center

Cheers,
Cainnabis

It's all coming together now. Looking good.

Man, I've burnt through 2 bulbs already! You would think it's my ballast right? LOL, it's always fucking something.

cain129 · #23 07-19-2009, 08:14 PM

Quote:

Originally Posted by bryant228

It's all coming together now. Looking good.

Man, I've burnt through 2 bulbs already! You would think it's my ballast right? LOL, it's always fucking something.

I messed up one of the 1000w bulbs by turning it off and then back on while it was hot. I won't be doing that anymore.

cain129 · #24 08-07-2009, 12:22 PM

Ok, All new modification to the veg area. Much better design and very clean.

I have a Stanley squirrel cage fan 400CFM from Walmart pulling cool air from the house into the veg room on a timer for a minute every 2 hours.

The veg room has 2 hot air exhaust stacks with 2- 6" fans that run constant exhaust. This keeps constant fresh air cycling from the house at a small rate when the squirrel cage isn't.

The Main exhaust fan connected to the light runs the exact opposite of the veg inlet fan at the same interval. So essentially, the main fan pulls fresh air in one hour and the squirrel cage does the next hour and vice a verse while the 2 little 4 inch fans constantly supply some sort of fresh air.

All fresh air comes in from the house, through the veg area and into the flowering room where it is cooled by the portable A/C and recycled every 2 hours out the attic.

The veg room has another cover that eliminates light leak but I needed light to take the pics. Hope you like. This room is ready to produce TGA DANK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

: fire:
Cainnabis

medicinal67 · #25 08-07-2009, 12:35 PM

Very resourcesful.

cain129 · #26 08-10-2009, 03:05 PM

Quote:

Originally Posted by medicinal67

Very resourcesful.

Exhaust stack from the portable A/C separated at the seam and caused the room to get up to 120 degrees!!!!!!!!!!!

My shit is screwed. What a mess. I really FU**ED this shit up!!! ARGHHHHHHHHHH!

MJ is dead!

ghydela · #27 08-30-2009, 10:41 PM

damn looks great. soon ill b getting ready to get started on mine

wonderblunder · #28 09-03-2009, 10:50 PM

That sucks the temp definitely jumps when that fucking thing comes off. I gorilla taped mine on after it fell off a time or two

cain129 · #29 09-05-2009, 10:42 AM

Quote:

Originally Posted by wonderblunder

That sucks the temp definitely jumps when that fucking thing comes off. I gorilla taped mine on after it fell off a time or two

That's what I used, Gorilla tape, when it fell. So now I used speed tape. It is the aluminum metalic type.

cain129 · #30 09-05-2009, 10:43 AM

Quote:

Originally Posted by cain129

So I made the aerocloner. Not like most as I did not have any pucks, nor did I feel like ordering any. I did have some scrap 1/4" neoprene sheets laying around so I figured I would try something a little different. The only issue with this design is the possibility of root damage on removal from the neoprene. We will see on ops check number 1. Soon!

I still need to section off the veg and clone area before operation can begin.

This aerocloner works like a champ. My first clone sprouted roots in 2 weeks.

Forum	Shop	Market		Seeds	FAQ	Tools
SEE OUR MARIJUANA SEED GUIDE FOR THE BEST STRAINS				Looking for Legal Marijuana look no further!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Thread	Thread Starter	Forum	Replies	Last Post
6OOO watt ventillation question	headbandrocker	Grow Room Design & Setup	37	11-12-2009 08:52 AM
Detection questions& concerns with flower room set up and grow. All help appreciated.	sow217	Grow Room Design & Setup	7	07-04-2009 04:34 PM
Controlling heat in the grow room	hearmenow	Newbie Central	9	04-30-2009 12:24 PM
Please Help! Need help setting up Venting for Flower Room	sow217	Indoor Growing	1	04-20-2009 03:16 PM
Help with new Flowering room. Detection questions and concerns	sow217	Indoor Growing	0	03-31-2009 02:04 PM

User Name		Remember Me?
Password

SEE OUR MARIJUANA SEED GUIDE FOR THE BEST STRAINS

Looking for Legal Marijuana look no further!

Thread

Thread Starter

Forum

Replies

Last Post

Posting Rules