Indoor Growing Cpu fans and cell phone chargers..
in the The Grow Room
forums; Doesn't everyone have an old pos computer in the garage or closet. I would totally recycle something(including a cell phone ...
-
Able To Roll A Joint
Able to roll a joint
Doesn't everyone have an old pos computer in the garage or closet. I would totally recycle something(including a cell phone charger) to do something like this. Power supplies(cell phone charger is a p/s) don't push amps. They "supply" up to what they are rated. The wiring and jack will be able to handle more than the supply and the supply should pop a fuse when it exceeds it's rating. So fire hazard wouldn't be a problem. Hells yeah on the xbox fans. EVERYONE seems to have a dead 360 these days. Mine recently f'd up again(I did the xclamp mod to fix it the first time). I'm just going to get an arcade and put my drive on it. Recycle. Stay green!
S.
-
Able To Roll A Joint
Able to roll a joint

Originally Posted by
Trunk5
honestly if you want the safest way to do this go out and buy a cheep $30 power supply 150watts or so this will be plenty, plenty of power to control your fans. mine is an old hp ps thats 130 watts. now to get it to turn on with out needing a computer, you take the main harness cut the green wire neer the plug and cut a black one close to it also, now twist the two togeather and plug into a wall. it should turn on, then unplug connect all the fans you need and enjoy! also if you wana be fancy you could install a switch inbetween the green and black wire and then you wont have to unplug it to turn it off if you needed.
kewl thanks would radio shack be the place to go?
watch the leaves blow

-
Check this link out, it's to a site where I found the fans to be really cheap pricewise, I've been running them twenty four seven and this is my second grow using them, so they are very dependable. This is what I bought...http://buyextras.com/bsun12balbea.html
I then went to a thrift store and bought two twelve volt chargers for a buck a piece. Cut the wire close to where it connects to a device, not near the charger end, leaving yourself plenty of cord. Strip the two wires and connect them to the two fan wires, you're in business.
Similar Threads
-
By cyphercrash in forum Do It Yourself
Replies: 11
Last Post: 10-11-2008, 02:13 AM
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks