Register GrowFAQ Live Chat Members List Search Today's Posts Mark Forums Read

SEE OUR MARIJUANA SEED GUIDE FOR THE BEST STRAINS
Detox Labs
Want Legal Marijuana? Shipped right to your door legally.

Marijuana

Go Back   Marijuana Growing > The Grow Room > Hydroponics / Aeroponics

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-20-2008, 04:12 AM
igrowhydro's Avatar
Able To Roll A Joint
Able to roll a joint
 
Join Date: Apr 2008
Posts: 81
Gallery:
igrowhydro is on a distinguished road
Points: 558, Level: 3 Points: 558, Level: 3 Points: 558, Level: 3
Activity: 0% Activity: 0% Activity: 0%
Default Cloning - Aeroponic vs. Bubbler

I'm curious as to other people's opinion on what they prefer to use to clone with.
Just like the title, which is better an aeroponic cloner or a bubbler?

I have a bubbler i'm using now and i'm not getting that great of results. I need to pump out 40 successfully rooted clones soon. So i need something that is 100% and simplistic to run every time with no tricks.

lets here it
Advertise to 10,000 People Per Day!
__________________
40 site commercial grow *Anything I post should be considered hypothetical. All of the pics i post are off the net. I do not condone illegal activities.*
Reply With Quote
  #2  
Old 07-20-2008, 12:45 PM
Learning How To Roll
Learning How To Roll
 
Join Date: Apr 2008
Posts: 32
Gallery:
thesublime1 is on a distinguished road
Points: 339, Level: 2 Points: 339, Level: 2 Points: 339, Level: 2
Activity: 0% Activity: 0% Activity: 0%
Default

I use an ez cloner and have consistent results. cut the clone, dip in root tech and put in the ez cloner. done
there are couple of things to take into consideration.
- must make sure that temp in the ez-cloner stays cool. (i keep mine around 73 with the help of a chiller) During cooler seasons it is not as hard to maintain, but right now without the chiller my cloner gets over 90 degrees. Then they all die.
- make sure the water ph is around 6. works well for me.

this method works for me everytime.
Reply With Quote
  #3  
Old 07-21-2008, 12:21 AM
igrowhydro's Avatar
Able To Roll A Joint
Able to roll a joint
 
Join Date: Apr 2008
Posts: 81
Gallery:
igrowhydro is on a distinguished road
Points: 558, Level: 3 Points: 558, Level: 3 Points: 558, Level: 3
Activity: 0% Activity: 0% Activity: 0%
Default

sounds good. I have wanted an ez cloner for a while, but just haven't had the extra money yet.

I am in the process of building a diy aero cloner and i hope it works out.
I will use a 396 eco pump, 1/2" pvc and 6-8 ez-clone misters. Then drill 2" holes in the top of a tote for 2" neoprene collars.

It should look something like this




This is stinkbud's cloner.

Question: Is it ok to run the misters 24/7 ?
Do you need an airstone?
__________________
40 site commercial grow *Anything I post should be considered hypothetical. All of the pics i post are off the net. I do not condone illegal activities.*
Reply With Quote
  #4  
Old 07-21-2008, 02:07 AM
Ganja Smoker
Pot Head
 
Join Date: Jul 2008
Posts: 332
Gallery:
stucklikechuck is on a distinguished road
Points: 951, Level: 4 Points: 951, Level: 4 Points: 951, Level: 4
Activity: 0% Activity: 0% Activity: 0%
Default

yes misters should be on all the time. and i dont know if you NEED a airstone but i dont see why it would hurt.
Reply With Quote
  #5  
Old 07-21-2008, 02:09 AM
Able To Roll A Joint
Able to roll a joint
 
Join Date: May 2008
Posts: 99
Gallery:
grapeoptimo is on a distinguished road
Points: 581, Level: 3 Points: 581, Level: 3 Points: 581, Level: 3
Activity: 0% Activity: 0% Activity: 0%
Default

i run mine 30 on 30 off works like a charm
__________________
everything i say is a lie i do not cultivate or smoke marijuana
Reply With Quote
  #6  
Old 07-21-2008, 10:42 AM
FLoJo's Avatar
Ganja Smoker
Pot Head
 
Join Date: Mar 2008
Posts: 314
Gallery:
FLoJo will become famous soon enough
Points: 1,516, Level: 5 Points: 1,516, Level: 5 Points: 1,516, Level: 5
Activity: 2% Activity: 2% Activity: 2%
Default

ya dont run the misters all the time, run the air pump all the time and do 30 on 30 off, gives the roots a lil time to dry off which will speed up development... and aero is the way to go... there simply is no faster method if you do it right
__________________
I'm full of Sh*T!My home built 2400w Vertical Grow HERE
Reply With Quote
  #7  
Old 07-21-2008, 03:03 PM
igrowhydro's Avatar
Able To Roll A Joint
Able to roll a joint
 
Join Date: Apr 2008
Posts: 81
Gallery:
igrowhydro is on a distinguished road
Points: 558, Level: 3 Points: 558, Level: 3 Points: 558, Level: 3
Activity: 0% Activity: 0% Activity: 0%
Default

ok i'm convinced. Would you guys consider that this design with 6 misters, eco 396 is sufficient? What are the important factors involved for the aero cloner to work right everytime ??

water temps? Air temps?

Water to use? Distilled? Tap? Should you add any suppliments to the water?

Dome? Mist how often for how many days?

Should you dip the clones in rooting gel before placing in the cloner?

Best timing schedule? 15 15, 30 30, 1 5 ??

thanks in advance, I need to get this right and I'm sure the collaborated info can help out lots of people
__________________
40 site commercial grow *Anything I post should be considered hypothetical. All of the pics i post are off the net. I do not condone illegal activities.*
Reply With Quote
  #8  
Old 07-21-2008, 07:09 PM
Learning How To Roll
Learning How To Roll
 
Join Date: Apr 2008
Posts: 32
Gallery:
thesublime1 is on a distinguished road
Points: 339, Level: 2 Points: 339, Level: 2 Points: 339, Level: 2
Activity: 0% Activity: 0% Activity: 0%
Default

water temps work faster at cooler temps. I have a chiller on my ez cloner and set it to 73. Air temp in room should be 70s.
- tap water works just fine. ph it to 6.
- no need for a dome, no misting.
- i use root tech, cut dip and place in cloner. done
- i also use root 66 (10 ml per gallon) helps development.
- sinve your running it all the time do 15 on 15 off.

most important factor is keeping the water temp in the cloner cool. the pump inside the cloner gets the water warm and can rot the cuttings.
I have used frozen 2 liters before, but too much temp fluctuation and so I just bought a 1/4 chiller. expensive but worth it to have 100% every time year round.
Reply With Quote
  #9  
Old 07-21-2008, 07:31 PM
igrowhydro's Avatar
Able To Roll A Joint
Able to roll a joint
 
Join Date: Apr 2008
Posts: 81
Gallery:
igrowhydro is on a distinguished road
Points: 558, Level: 3 Points: 558, Level: 3 Points: 558, Level: 3
Activity: 0% Activity: 0% Activity: 0%
Default

Quote:
Originally Posted by thesublime1 View Post
water temps work faster at cooler temps. I have a chiller on my ez cloner and set it to 73. Air temp in room should be 70s.
- tap water works just fine. ph it to 6.
- no need for a dome, no misting.
- i use root tech, cut dip and place in cloner. done
- i also use root 66 (10 ml per gallon) helps development.
- sinve your running it all the time do 15 on 15 off.

most important factor is keeping the water temp in the cloner cool. the pump inside the cloner gets the water warm and can rot the cuttings.
I have used frozen 2 liters before, but too much temp fluctuation and so I just bought a 1/4 chiller. expensive but worth it to have 100% every time year round.

Thank You
That is pretty conclusive to everything ive read today. I just ordered some root tech gel and clonex gel trial packs! woot woot.. I have clonex clone solution already... It calls for i think 10ml per gallon. Is this ok to use like the root 66?
__________________
40 site commercial grow *Anything I post should be considered hypothetical. All of the pics i post are off the net. I do not condone illegal activities.*
Reply With Quote
  #10  
Old 07-22-2008, 07:35 AM
420ClosetGrow's Avatar
Able To Roll A Joint
Able to roll a joint
 
Join Date: May 2008
Posts: 81
Gallery:
420ClosetGrow is on a distinguished road
Points: 427, Level: 3 Points: 427, Level: 3 Points: 427, Level: 3
Activity: 0% Activity: 0% Activity: 0%
Default

for dwc you'll need air stones. it produces bubbles which contains oxygen which is delivered to the developing root system. read, read and read some more. don't cheap out when your growing. it'll just cost you in the end.
Order your seeds now
Reply With Quote
Reply

Tags
aeroponic, bubbler, cloning

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
UFO + Aeroponic setup or 600Watt HPS + Aeroponic? *PIC* vbp6us Grow Room Design & Setup 12 08-29-2008 08:02 AM
I have a bubbler, I just saw an aeroponic bubbler so.... nastynate101 Hydroponics / Aeroponics 0 03-14-2008 07:10 PM
$$ my WM aero bubbler cloning machine $$ BIGMIKE13 Do It Yourself 45 03-10-2008 10:05 AM
Aeroponic cloning help STINKFOOT Hydroponics / Aeroponics 3 03-02-2008 03:27 PM
bubbler/cloning unit skintight Newbie Central 1 07-06-2007 08:56 PM


Hide Your Identity

Come Check out a new Poker Forum for the online poker community

All times are GMT -7. The time now is 03:02 PM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.2.0
Page generated in 0.38513 seconds with 12 queries