first hydro-drip system

I would go with a dark container where no light can penetrate the tub. This way, algae will not be able to form in your water. As for your watering cycle, I don't know since I'm also looking for that answer myself.

-PEACE

just trying out some decent bag seeds first. i have it set for 3 feedings at 5 minutes per feed during the daylight hours. after letting it drip on a piece of rockwool for 10 minutes it was extremely wet and didn't dry out enough between feedings. so we'll see how it goes. might be to much.

i also worked on the budding room some. i have to cut down the container to about 6-8 inches high. it was the best fitting container i could find. max out the space you know.. i'm not sure if i'm going to go drip irrigation or go ebb n flow. i have the parts for both.

Based on the pics of your setup, I'd wager the video in question is "I Grow Chronic!", also known as the Green Man video or the Mr. Green video. That's the video that got me into hydroponic gardening; it holds a special place in my heart

The underbed container made me laugh, because that's the exact same container I'm currently growing in! Wal-Mart, $6.49 + tax, right? One thing I'd recommend based on the pics of your veg room - and please don't take this the wrong way, I'm not trying to be a dick - you should clean up all that miscellaneous debris underneath your table. It just looks like it's dying to get in your way. It also looks a bit dusty or dirty - I'm guessing this is out in a garage somewhere - a sign that there wasn't a lot of pre-cleaning happening before you set the room up for veg. If it's possible remove your growing kit from the room and give it a good once over with some bleach water. Trust me, the last thing you want is for your girls to get some sort of infection just from common household bacteria whose presence could have been easily remedied early on. Again, just trying to be helpful.

Maybe I missed it, but what are you using as a resivoir in your veg room? I've been using that same tote, with a drip system, and I use a 5 gallon bucket as my resivoir. The tote is filled with hydroton and I grow my plants in rockwool set in mesh pots. The timers I use are inexpensive, analog timers with a minimum 30-minute on/off cycle. Up until recently I'd been watering about five times a day for thirty minutes each; a recent post in this forum has led me to drop my watering schedule to three times daily, thirty minutes each. I've already noticed a marked improvement in my plants; the root systems have grown quite a bit in the last four or five days since I altered the feeding schedule.

Also, I've got my drippers dialed in so that they drip once every 1.5-2 seconds, although I have to inspect the drip rate every so often, as occasional salt buildup in the drip emitters tends to effect the flow of water to the plants. One thing I've found useful when unable to effectively slow the drip rate is to add an inline drip emitter and adjust it so that it's also taking up some of the water flow; this way less water makes it to the end of the line.

This weekend I'm taking the whole thing apart temporarily and I'll be spray painting the rubbermaid tote black - only on the outside - since even with the hydroton filling the container I'm still getting enough light at the bottom where water sits to cause problems with algea. I'd rather fix the problem now than have do deal with root problems later on.

As for your flowering room... I'm jealous that you have an HID and I don't! Have you thought about using a tote with holes in the lid with a bubbler or aeroponics system installed? I can't really tell how big the flowering room is; how many plants do you plan to flower at once?

One more thing: When looking for a hydroponics bed for an ebb/flow or drip system, you might save some serious cash simply by cruising back behind any local supermarkets/department stores which have a floral department. Many stores recieve potted plants in 3'x3' or 4'x4' sturdy, black plastic bins which are PERFECT for hydro applications. When they're emptied they are left outside to be picked up by recycling or waste disposal trucks. All you have to do is clean them, drill or cut holes for your drains, install drain fittings, and congrats, you've just spent approximately ten bucks on parts and aquarium silicone versus 60-150 for a brand name bed!

yeah, thats the video that inspired me to go hydro instead of soil. both the veg and flowering areas are in seperate closets. i don't have alot of space so the debris you speak of are a couple of storage containers under the boards i'm using as a table. i covered everying under it with plastic incase there is a leak or something worse. i had to prop the corners of the getto flood table to ensure the runoff goes down the drain. i'm using a 18 gallon container from wally world as the resivoir. i had to get a more powerful pump since i need to move water 5 feet so i picked up a rio+ 1700 water pump. for the drip side of things i'm using a dig 12 zone drip head that is totally customizable. choose which lines to use.. came with alot of stuff.. stakes, plugs etc. the lights in the veg are 4 foot flourecents. the ballast was only 5 bucks at walmart so i maxed out the area by cramming 3 into the space. each has a cool white and a warm white bulb.

i'm using the same tote for the resivoir in the flowering area. i can use the pump i orginally had in the veg since its within the overhead height. i have a 6 zone drip head for it also. i'm finally going to be able to use the 600 watt hps light that i bought last fall. woohoo.. haha

i will definatly check out the back area of the floral department. they are just getting it set up with spring just around the corner.

day 5 and things are going well. good root development. 5 minute waterings seem to be ok. hopefully in 2 weeks i'll see a nice growth spurt.

Your schedule should do fine, i run an ebb and flow that runs 15 minutes every 2 hours in light, 5 tubes on a 200GPH pump. that's like a 40 GPH dripper. so i doubt you're doing too much.

thats a nice little system

day 11 and things are going great. both plants have a good root system started. raised the lights a little today and worked on the flowering closet. i read some other topics and went to radioshack and picked up a 4 inch cooling fan for my 600w hps. had to modify some sheetmetal and fabbed up a mounting bracket for the fan to attached to the supernova reflector. only a couple more things to do. fresh air intake and co2. but i still have at least a month before i can clone and sex them. pray for girls..