and as far as all this taste shit... im purddy sure that as long as you get that GOOD flush on in the end, and that GOOD cure that aythang should be tasty...ryte?

__________________
Jack Herer up in my swisha sweet and we get blowed, like sum west bay bosses out the 650

Thanks for the tip Jordon I will look into that.

Hatch I am sorry if it came out like that but I was not trying to nock any of the other DIY systems. I used and built most of them already, they were all awesome in there own way. I was just pointing out that this in not the same as what most people see or think about when they hear the term aeroponics. Usually when a person, myself included hears, or sees aero they think sprayer and mag pumps. The fact of the matter is that true aero will not work with a mag pump, and those run of the mill sprayer are not made for aeroponics. I wasn't trying to knock any one or anything.

__________________

All Good My Brother!!~~~~~~Hey I'll look back in Your Thread or Go to the other site. But what are The Mister Tip's that you are using Called, & Can I get a good pic of one? Or are they Fogger's?

I use 1400 GPH Pump's, Through My Mister's, There is A real Fine Mist. Ya Mag.Pump's can't get near the flo that I like. I use In-Line Jet-Pump's, & Submersible Pump's.

What is going to be Your Watering Schedule???

__________________
http://www.rollitup.org/grow-juornals/58174-hatch-style-chronic-kindbud-cuoch.html Show http://www.rollitup.org/grow-journal...les-hatch.html

The misters I am using are called "Superfine Misters' They can be found at the bottom of this page. Get the white one as the other ones are to big of a droplet. To be honest 55 microns is borderline as far as droplet size. 30-80 microns is about the size of the lenticels on the roots, so anything smaller that 30 is more of a fog, anything bigger than 80 saturates the root mass, and becomes more of and NFT type system.

Ok as for my status on my grow... well I am still right where I was. Water system is in place, light will be here Thurs. along with my timer. I have reflective mylar up all the way around, and my hood/reflector is mounted in place. I am currently working on a way to make my batwing reflector somewhat aircooled.

My plan was to mount 2 120mm PC fans on the sides of the mogul socket, then mount a really powerful (130CFM) 120mm PC fan at the other end but centered so that it is in front of the bulb (but at the end of the reflector). At that point I will just need to mount a piece of glass or lexan. Lexan is good up to 300 degrees F but I am unsure if that is enough for an air cooled reflector. To be honest I am thinking that I will not see any plant growth for about another month. I am not buying any seed as of yet, but I have 2 bag seed that I pulled out of a bag of good Dro that I bought a while back. I am still unsure how I will get these seeds to grow in a medium free system. The best I can think of is to use the left over 1" rock wool cubes that I have left. Beside that there really isn't anything new going on.

Oh and about the water schedule... I am not sure if you mean the nute schedule or just how often I water them. I have no nute schedule YET, but for watering I am planning to do a 30seconds on/ 3 minutes off.

__________________

Thank's For the Link. Good Stuff. Ya that what I was woundering on the watering.

Sound's Good.

__________________
http://www.rollitup.org/grow-juornals/58174-hatch-style-chronic-kindbud-cuoch.html Show http://www.rollitup.org/grow-journal...les-hatch.html

Thats easy man... get like a shallow cake pan, some vermiculite, and some water. fill up the pan til bout 3/4" from the top wid vermiculite. nestle the seeds in there pointing down ward, far enough where you can still see the back of the seed.water until surface shows saturation...these will root in the pan and when they are of an appropriate transplant size, you take sum rubber stoppers i think a #10 will work( size ). bore out the middle to about an inch and a half. make a cut so they are like a broken circle. drill holes in chamber lid that will hold stoppers tightly. take rooted cuttings and wrap them up to the cotyledons in polyester fiber until they fit snugly into the stoppers. those should hold watever the lid can...

__________________
Jack Herer up in my swisha sweet and we get blowed, like sum west bay bosses out the 650

subscribed - looking forward to seeing some greenery in there!

__________________
Grow Journals
The latest-> White Berry Big Bud/PPP PPP

Once again Jordan TY... I will do the Vermiculite and cake pan thing, but I am planning on using neoprene plugs, or maybe pool noodles. The vermiculite should come right off the roots when I add them to the grow chamber.

Hatch- I like these misters a lot, I was using the red aerocloner sprayers but was a bit unhappy with them. It's not that they didn't do a good job, it's just not what I wanted. I was looking for a mist and not a spray like I said before. I do want to inform you though that these mister need like at least 40PSI in order to work properly.

I WOULD LIKE TO POINT OUT TO EVERYONE THAT A MAG-DRIVE PUMP WILL NOT WORK WITH THESE MISTERS.
THESE MISTERS ARE DESIGN FOR LOW FLOW HIGH PRESSURE USE.

The problem is that mag drive pumps are designed for high flow low pressure. I am not familiar with submersible or jet flow pumps, but for a smaller system like mine RV Diaphragm pumps work great. They are design for just such situations of intermittent on/off use.

Come back tonight and I will have more pictures for us. I am building my air-cooled reflector and will post pics.

__________________

No power in my garage??? I will have to try and work tomorrow.

__________________

Along for the ride!

__________________
All things flow to the sea in the end!