Couple of questions about my New Aeroponic Grow Table Design

I am designing a new style aeroponic system for my grow room and have some questions if anyone can answer them. The design consists of 6"pvc with 3"holes cut in it for the net pots. A 1/2"spray pipe run through the center of the pipe.

My first question is - Will there "probably" be enough room for the root growth if I am only putting in 10 plants per 10ft pipe?

Second question is - Will an air stone in the resevior be enough oxygen added or do i need to add one or stones inside the pipes also?

I am sure I will have more questions for the more experienced aero growers here buy i will start with these two for now.

6in is more than enough, a lot of people use 4, you shouldnt need an air stone at all, your water being sprayed and drained is all the airation you need.

How far apart should I set the tubes?? I was thinking not more than 3 to 3 inches. As you can see from the pdf I am going with a stagard plant layout. With 9 in the first pipe and 10 in the second and so forth.

Originally Posted by IrishDoc

How far apart should I set the tubes?? I was thinking not more than 3 to 3 inches. As you can see from the pdf I am going with a stagard plant layout. With 9 in the first pipe and 10 in the second and so forth.

3 inches why not, just keep keep them trimmed, aiming for single cola yeh