please tell me from your experience if this is a good ppm meter to buy





Brand New - HANNA Primo TDS Meter

One free 20ml 1382 ppm TDS calibration solution and two free batteries included.

• High accuracy <LI class=text4>Exceptional linearity over the entire range
• Automatic calibration with the press of a button

The Primo provides a fast and dependable way to measure the Total Dissolved Solids level in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of the Primos easy-to-read Liquid Crystal Display when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature. Operating and routine maintenance has never been easier. The Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and the Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds, the meter recognizes the calibration solution and calibrates itself!

Primo is supplied complete with batteries and instructions.

Available Accessories:HI 7031M|1413 µS/cm @ 25°C cal. Sol.HI 70031P|1413 µS/cm @ 25°C cal. KitHI 7032M|1382 ppm @ 25°C cal. Sol.hI 70032P|1382 ppm @ 25°C cal. Kit

Specifications:

Range

1999 ppm (mg/L)

Resolution

1 ppm (mg/L)

Accuracy (@20°C/68°F)

±2% Full Scale

pH Calibration

Automatic at 1382 ppm

Temp. Compensation

Automatic, from 0 to 60°C (32 to 140°F)

Battery Type / Life

2 x 1.4V, 200 hours of continuous use

Environment

0 to 50°C (32 to 122°F); RH 90%

Dimensions

180 x 50 x 25mm (7 x 2 x 1")

Weight

80 g (2.9 oz.)

__________________
Roll Dat .
that Blunt
get high as a kite. Cuz I Sure as hell might.
http://ebaumsworld.com/tags/pot-bust/ You gotta check this..fuck tha feds

I'm just a newbie and don't know much. My experience has been wierd though. I bought one on eBay. Wouldn't calibrate so sent it back for a replacement which worked for a week or so then the read out started jumping all over the place and at different times the read out would flash E52 and wouldn't turn off but no one seems to know what error code that is. Thought maybe the eBay place had seconds.

Called Hanna and they told me it was their most dependable inexpensive TDS and they sold a lot of them.

I am currently waiting for my third Primo to be returned to me, but this time directly from Hanna, so hoping it will work as well as they say it should. It does have a 1 yr warranty, so for me the bad part has being without one for the time to have it mailed, replaced, and returned. That probably doesn't help much????

Also found out that the info sheet doesn't tell you a few things. There are min and max lines on the probe and I believe the instructions also tell you not to put it in the water above the max line (they're NOT water proof.), BUT to calibrate you have to cover the hole that is ABOVE the max line with water for it to read the TDS correctly. Why that isn't in the instructions, I can't imagine as it can make a lot of difference. Think you need to cover that hole also when doing a read out or Hanna said to wiggle it around in the water to remove any air. If you don't, you won't get a correct reading.

When it was working, it was easy to use and I liked it. Hoping for me 3rd times the charm!

__________________
Lovin Lake Tahoe
....................

so wait ..wtf u have to cover the hole but it is above the max line thats doesnt make sence u cant go above the max line with water so how r u soposed to cover the hole?

__________________
Roll Dat .
that Blunt
get high as a kite. Cuz I Sure as hell might.
http://ebaumsworld.com/tags/pot-bust/ You gotta check this..fuck tha feds

You just stick it in the solution and read it. I have one, I just calibrate it everytime I use it. Never had any problems. Cheap too...practically disposable.