Results 1 to 7 of 7
Hydroponics / Aeroponics

aeroponics water jets suck

in the

The Grow Room

forums; hey guys. hey are you tierd of stoped up water jets and broken down big water pumps on your aeroponics ...
  1. #1
    Stranger Stranger
    Join Date
    Oct 2006

    Posts
    2

    Talking aeroponics water jets suck

    hey guys. hey are you tierd of stoped up water jets and broken down big water pumps on your aeroponics systems well me to. i invented a new air turbo jet that uses air from a hakko pump and will fog and mist any system. i foged a 8x8 room with one jet and drenched the cieling and walls from mid height of the room were the jet was located and little air pressure. the jet swirls the water so fast it creates a foggy mist that covers everything and water never passes thru the jet i have housed serval jets five in total in a insulated box and set it outside the homemade aeroponics system i but a 3 inch 12 volt fan blowing into the box which forces air thru a 3 inch pipe into a 4x8 resovoir which has a 8 inch air gap full of roots to the max and its over kill by far and it never gets stops up it,s been 3 crops and i just never even look at them anymore i filter the incoming air from the air pump which was done by the company and i never worry about it. the jet picks up water but it does not pass thru the air hole this 5 jet system are the single jet ones can be adjusted to throw a very fine misty fog are a more watery misty fog and the height of the foggy mist can be adjusted for water content verses fog the jets blow striaght up then fans out drenching everything again with a foggy misty mixture of everything from a 2.5 to 10 micron are larger if wished by ajustment but the foggy 2.5 no matter how adjusted remains there for the roots the roots explode with new growth even on plants near there end of growth when compared to reg. water jet system these things blow them away it,s amazing . i,am thinking of looking for a company to produce them at this point i,am making them my self on a lathe and cnc mill. take care
    Last edited by BIG BUD; 10-09-2006 at 03:18 AM. Reason: miss spelled words

  2. #2
    Ganja Smoker Pot Head Styl!st07's Avatar
    Join Date
    Aug 2008

    Location
    URANUS
    Posts
    281

    Default

    that is the longest sentence I've ever seen. Jk

    Where r the pics?

    - Styl!st

  3. #3
    Moderator Mr. Ganja potpimp's Avatar
    Join Date
    Aug 2007

    Location
    Anchorage, ALASKA
    Posts
    6,608

    Default

    LMAO @ Styl! Wow, I'm with you bro. BB, if you don't have pix, you don't have the turbo jet.
    Quote Originally Posted by theleach View Post
    That's all assuming the plant is female. If male, it wont produce colas, just lots and lots of seeds.
    Quote Originally Posted by UncleBuck View Post
    i wouldn't turn down a handjob from giggles.
    http://www.rollitup.org/grow-journal...bean-grow.html

  4. #4
    Able To Roll A Joint Able to roll a joint wyatte's Avatar
    Join Date
    Mar 2009

    Posts
    60

    Default

    eh... just go to ebay.... find the seller mauibuilt_products and buy his sprayers. I use them in all of my systems and never had a problem with them. May not have the spread that a "super spinning hydro/air" has but.... in an aero system... you want more than 1 jet anyway. Almost never clog and if they do happen to get one... a strait pin unclogs them in seconds. I always had a great experience in ordering from him... fast shipping etc.
    my address is 420 - how fitting.

  5. #5
    Able To Roll A Joint Able to roll a joint
    Join Date
    Nov 2008

    Posts
    76

    Default

    Quote Originally Posted by wyatte View Post
    eh... just go to ebay.... find the seller mauibuilt_products and buy his sprayers. I use them in all of my systems and never had a problem with them. May not have the spread that a "super spinning hydro/air" has but.... in an aero system... you want more than 1 jet anyway. Almost never clog and if they do happen to get one... a strait pin unclogs them in seconds. I always had a great experience in ordering from him... fast shipping etc.
    The only reasons why they get clogged up is because of chemicals. There is nothing you can do about build up aside for clean it in my opinion

  6. #6
    Able To Roll A Joint Able to roll a joint The Mad Hatter's Avatar
    Join Date
    Oct 2009

    Posts
    71

    Default

    Quote Originally Posted by BIG BUD View Post
    hey guys. hey are you tierd of stoped up water jets and broken down big water pumps on your aeroponics systems well me to. i invented a new air turbo jet that uses air from a hakko pump and will fog and mist any system. i foged a 8x8 room with one jet and drenched the cieling and walls from mid height of the room were the jet was located and little air pressure. the jet swirls the water so fast it creates a foggy mist that covers everything and water never passes thru the jet i have housed serval jets five in total in a insulated box and set it outside the homemade aeroponics system i but a 3 inch 12 volt fan blowing into the box which forces air thru a 3 inch pipe into a 4x8 resovoir which has a 8 inch air gap full of roots to the max and its over kill by far and it never gets stops up it,s been 3 crops and i just never even look at them anymore i filter the incoming air from the air pump which was done by the company and i never worry about it. the jet picks up water but it does not pass thru the air hole this 5 jet system are the single jet ones can be adjusted to throw a very fine misty fog are a more watery misty fog and the height of the foggy mist can be adjusted for water content verses fog the jets blow striaght up then fans out drenching everything again with a foggy misty mixture of everything from a 2.5 to 10 micron are larger if wished by ajustment but the foggy 2.5 no matter how adjusted remains there for the roots the roots explode with new growth even on plants near there end of growth when compared to reg. water jet system these things blow them away it,s amazing . i,am thinking of looking for a company to produce them at this point i,am making them my self on a lathe and cnc mill. take care

    Yeh seriously... You gotta' post some pics man... Sounds killer!
    My crazy runs wide, and it runs deep...

  7. #7
    Stranger Stranger mdol's Avatar
    Join Date
    Sep 2010

    Posts
    5
    Journal Entries
    1

    Default how do i get that turbo jet

    so can ya make me a couple I'm really very interested please let me know>>

Similar Threads

  1. Tap Water, Mineral Water, Purified Water or Distilled Water???
    By MrIntricate in forum Hydroponics / Aeroponics
    Replies: 32
    Last Post: 03-06-2013, 04:31 PM
  2. Club soda or seltzer water to water plants?
    By cheda in forum General Marijuana Growing
    Replies: 53
    Last Post: 01-23-2013, 12:53 PM
  3. I'm So Bad I Can Suck My Own...
    By Widow Maker in forum Toke N Talk
    Replies: 4
    Last Post: 04-03-2011, 08:39 PM
  4. How to water, do I use a spray or just water the soil?
    By VTW3PN in forum Outdoor Growing
    Replies: 10
    Last Post: 06-12-2007, 10:42 AM
  5. Aeroponics- Help
    By flo power in forum Hydroponics / Aeroponics
    Replies: 1
    Last Post: 01-31-2007, 11:46 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •