Thanks, I will be adding more pics frequently........

sure you can.....overgrow them all!!

I don't, i am a retiree. Well sometimes, but not much....its not unusual for me to go 5-6 days with out leaving my property.


Ya thats the truth....thanks again...


-OitW

__________________
"You know you can re-use your Hydroton? Nobody here thinks you are."-Clerk 2008
http://www.rollitup.org/hydroponics-...w-journal.html
http://www.rollitup.org/grow-room-de...om-set-up.html

Thanks, I will keep the pics coming...

__________________
"You know you can re-use your Hydroton? Nobody here thinks you are."-Clerk 2008
http://www.rollitup.org/hydroponics-...w-journal.html
http://www.rollitup.org/grow-room-de...om-set-up.html

Ya exciting times when firing up a new op...don't be intimidated by the process. If you need any help you can ask me here or post a thread in hydro or design/set-up so other experienced members can offer assistance as well.

You won't fuck it up, just look at me....i am not smarter than your average bear and this is my first grow.....lots of hurdles were overcome, so it does take a while and the learning never stops.

Good Luck, and grow mon grow

-OitW

__________________
"You know you can re-use your Hydroton? Nobody here thinks you are."-Clerk 2008
http://www.rollitup.org/hydroponics-...w-journal.html
http://www.rollitup.org/grow-room-de...om-set-up.html

Subcribed!!!!!!!!!!!!!!

NIce grow Old, looks like u done ur home work.lol

After u cut and dip ur clone and place them in the dark room, do u have them on a heat mat with the dome on?

I dont remember seeing that in ur posting but i might have missed that.

- Styl!st

Yep there is a shot of the Tstat for the heat mats on page1, i used a splitter and have 2-24x24"heat mats plugged in to one thermostat, you can barely see them under the 4 trays...set at 80-82f..

For everyone here that has trouble with rockwool, the same system with RR should be a snap.

Thanks for checking it out.


-OitW

__________________
"You know you can re-use your Hydroton? Nobody here thinks you are."-Clerk 2008
http://www.rollitup.org/hydroponics-...w-journal.html
http://www.rollitup.org/grow-room-de...om-set-up.html

Thanks man! Ive read Als threads several times lol Ur system looks exactly like the diagram on the first page of one of his threads...Just Awesome!

Ur answer to stylist kinda summed it up for me....Up to now Ive had success cloning in a simple cup of water ( Enuff at least which has been sufficient to keep my simple small 4-5 plant system stuffed)... And not alot with rockwool in the DWC... But I think i need something better in place to be able to keep 12 plants rotating flower on this system... Thanks for the help man Ive been looking for a way to have sure success with the plugs and urs looks like well..... INSANE

__________________

Yes dl, INSANE indeed.

Just make sure to turn them upside down and make your own hole in the plugs. My success rate goes way down if I use the manufacturers hole because unless they are real fat cuttings they are not held firmly enough by the medium.

Good luck and keep me posted!

__________________
"You know you can re-use your Hydroton? Nobody here thinks you are."-Clerk 2008
http://www.rollitup.org/hydroponics-...w-journal.html
http://www.rollitup.org/grow-room-de...om-set-up.html

Damn, Cant believe I didnt see this one earlier. Awesome job. I clone in a bubble cloner and let the roots get all crazy like that too before flower... Just no medium. Love the setup

BTW +Rep

__________________
Its all a lie! http://www.rollitup.org/grow-journal...ml#post2479535

I have already gotten some inquiries about my cloning methods.

Here is a copy of my response that explains it in more detail......

1.Select Mum.

2.Prep branches to be cut. I clean off all side branches down to the node I will leave for it to regrow from. I do this on all tops at the same time.

3.Cut at 45deg angle (or steeper) with CLEAN and SANITIZED scalpel or sharp, high-quality shears(i prefer shears) but I go through 3 or 4 pairs a month.

4.As each are cut I immediately dip them in Clonex gel, then insert into upside down rapid rooter that i have made my own hole in with a chopstick or something, and pre-watered with 5.8 ph h2o, treated with 1.7 ml-35%h2o2 per litre of water.

-I have gotten pretty quick at this, if you are moving slowly you may want to keep them covered with the humidome and mist them after every 3-6 cuttings so they don't suffer before the dark period.

5.When each tray is full I cover with humidome and place in the dark.

6.After 6-12 hrs of darkness or when I remember them they go on horticultural heat mats--not heating pads--set to 82 deg f.

7. Water as needed twice daily to keep them moist but not soaked. You know they are rooting because after 5-6 days they start using alot more water during the day.

--I water using a spray bottle with the tip adjusted so it sprays a single stream not a fine mist and water by spraying the plug at the top where the stem enters

-I do not mist the foliage in humidomes after the initial cutting--they don't need it--it will be over 90% humidity in the dome and this will encourage powdery mildew that will eat up a tray of clones in a few days.

Thats about it.
Good Luck

__________________
"You know you can re-use your Hydroton? Nobody here thinks you are."-Clerk 2008
http://www.rollitup.org/hydroponics-...w-journal.html
http://www.rollitup.org/grow-room-de...om-set-up.html

Hey thanks!

__________________
"You know you can re-use your Hydroton? Nobody here thinks you are."-Clerk 2008
http://www.rollitup.org/hydroponics-...w-journal.html
http://www.rollitup.org/grow-room-de...om-set-up.html