Harvest a Pound Every Three Weeks!

Originally Posted by oldtimer1

Hi StinkBud and all, What is your lighting set for in the flower room 12/12?

flower is 12/12, veg is 24/0.

Originally Posted by oceangreen

SS for the the support rail system for the posts ( flowering system) are you using 3/4 PVC or 1" PVC?

Also in the 2 Inch drain pipe, How did you cut rectangles in the pipe and made sure they fit well??

3/4" for frame. dremel tool, gotta love it. assemble the frame and put rails on, assemble the drain and sit in drain hole. slide rails to where bottom edge contacts drain and mark. use a long straight edge and extend it along drain so all holes are even on bottem cut. then cut up and over to complete, may have to test fit a little. leave enough room on top cut for rail end piece(manifold) slides down in a little. on the bottom of rails i cut and bent a drip edge to prevent drops walking back up the rail and to lock rail into drain.

Thank you SS and oceangreen, sorry I just came back to site (stopped growing for a awhile) also to find all this drama with SB. I too have the old SB system, and didn't know if you young guns where using shorter flowering times.SS do you have your mod's posted here? If it s not free I will pay you, but times are really bad now have no choice but to start grow again to feed my family. SS Thank you again for all your help and time involved.

SS BTW, I ask only because my funds are limited to get everything back up and running and I can't afford wasted time and money. I will be supplying my local dispensary with my product. From what I've read of your post here( and there are many), you have spent a lot time and effort in perfecting and improving SB's system making it your own. I don't have time to work the bugs out of the old system(only two grows with SB's), I sold everything I had, and have to start over. (a cop moved in next door and my wife freaked out) I've got your Nut's chart Good info. I'm sorry if it's already posted and I can't find it.Thank you

Broke, Beatin down but not dead yet.

SS, found some of your posts and photos, nice set up. I will keep searching your post. Thank you

Originally Posted by oldtimer1

SS, found some of your posts and photos, nice set up. I will keep searching your post. Thank you

Everything you need is on here...

ask away man. ive been in the place you are, when i found stink, and i will help all i can.
spread the love and knowledge.

Originally Posted by superstoner1

they are 45* elbows, it lets rail sit to edge of rail
middle to cool res more even. the extensions are no biggie, my others i cut and rebent but forgot to on this one.
drain and t are 2"
between rails is 8" between plants is 12"
rails come 96", i cut to 46"
frame sits about 1/4" above res.

How long are the PVC 3/4 going across?

Can you show a pic of the spray manifold elbows out of the posts?..

In your pics they are lw without the end caps, and th on the pic with the end cap attached they much higher...

Also do you glue the end caps on.? If so how do you take the sprayer manifold out in the future?