Making Hash Tutorial

Hello fellow growers, I just completed my white widow hydroponics grow and was trying to find a good way to make hash so after looking at some youtube videos I thought I would go with the GUMBY method and it turned out great!!!!!!

Ok Here We Go!!!!! Sorry if the Pictures are too big.

Here is all the leaf cuttings from both of my white widow plants. make sure not to use big fan leaves as you are going to get a lot of contaminants in your hash


I then added cold water and ice to the mix then stirred using the mortar bit non-stop for at least 15 min to get all the THC crystals off the leaf material


Here is what the mix looks like about about 15 min of mixing


I then used a kitchen strainer to get all the leaf material and debris out of the water


This is what the liquid looks like after all the leafs are pulled out


Then you want to let the liquid sit for at least 4 hours without moving it to get all the good stuff to sink to the bottom


I then used a small air hose to siphon out all the water carefully making sure that im not disturbing the bottom layer of liquid


After about 20 min I got down to the bottom layer of liquid then stop siphoning


This is how much liquid I am left with


I then placed the liquid into a jar then let sit for another 4 hours and you can see the hash layer at the bottom of the jar


I then siphoned the water out of the jar making sure not to disturb the bottom crystals


This is what you are then left with


I then placed a baggy on top of another jar then dumped the remaining liquid out into the baggy


I then let the liquid sit for about 1 hour


Then i placed the jar into the oven with a light on top to evaporate the liquid (do not turn on the oven)


Here is what is left over after the water is evaporated


Here is the final product. you can roll it out into a ball or flatten it out



Hopefully this helps anyone with their hash making adventure, enjoy and grow on

Moto that rocks. Nice easy and inexpensive. Well donekiss-ass

Once again, job well done sir!! how big was that ball and how good was it??

orzz said:

Moto that rocks. Nice easy and inexpensive. Well donekiss-ass

Click to expand...

Thank you Orzz After all was said and done i had only spent about $30 on materials.

yetibear said:

Once again, job well done sir!! how big was that ball and how good was it??

Click to expand...

Thank you yet!!!!! I have not weighed it, but I rolled it out until the outside turned black and shinny and it shrunk down to about the size of a quarter if you were to cut it in half and place one on top of the other. It smokes amazing!!!! totally worth the extra day of work.

I use the Isopropyl alcohol method but this is nice and informative!

Good job

what does a mortar bit look like?? can i just stir it by hand really aggressively for like 30 mins?

motif said:

what does a mortar bit look like?? can i just stir it by hand really aggressively for like 30 mins?

Click to expand...

here is a pic of what the bit looks like. I purchased mine at home depot for a good price. I think that you have to mix the solution pretty violently to get all the THC to shake off everything so I dont think that you would have a good result by using just your hands.

niiiiiiiiiiiiiiiiiceeee i'll be harvesting this week and I have to try this make me some cookies with this hash

I am going to do the gumby method in a few days with trim from 10 plants (2x PPP, 2x Snow White, 3x Strawberry Cough, 3x Afghan Kush). I'll let you know how it turns out

Oh, and it shouldn't matter if you use larger fan leaves, you're going to strain it out anyway.

very very informative.. i plan on using this exact recipe very soon... thanks!

yo motorracer nice thread simple and effective! just wondering how much trim you started with ?

BigBud992 said:

I am going to do the gumby method in a few days with trim from 10 plants (2x PPP, 2x Snow White, 3x Strawberry Cough, 3x Afghan Kush). I'll let you know how it turns out

Oh, and it shouldn't matter if you use larger fan leaves, you're going to strain it out anyway.

Click to expand...

Nice, you'll have to let me know how they turn out for sure, you should get a pretty big ball off those

chronicdice88 said:

very very informative.. i plan on using this exact recipe very soon... thanks!

Click to expand...

Excellent!!!!! one thing that I should have done different that might make it easier for you is instead of drying the hash on a plastic baggy i would recommend using some wax paper, the plastic bag made it hard to scrape off all the thc.

Don Gin and Ton said:

yo motorracer nice thread simple and effective! just wondering how much trim you started with ?

Click to expand...

thank you Don. I really didnt use too much trim because i didnt use the big fan leaves, but it was enough to fill up a 3-4 gallon trash bag

i have been watching a couple of vids on gumby recently,
glad someone on rui posted there experience, now im definately gonna do it!

keep it up bro

covertgrow

I just used the trim (and most fan leaves) from 10 feminized plants (6 of them being clones, 4 of them from seed) in the gumby hash method. 3x strawberry cough clones, 3x afghan kush clones, 2x PPP & 2x Snow White. I had about 200g or so of trim from the PPP and Snow White plants, and about another (only estimating) 200+ grams of trim from the strawberry cough and afghan kush. So a total of 400 or so grams of trim, and I ended up with 11 grams of hash. I've heard that you get about 15%, on average, of your original trim weight - but 11 grams seems a little low to me...so the amount of trim I used could have been closer to 300g.

I plan on making some THC pills with this hash (dissolved in coconut oil). I'm going to add the activated THC within the coconut oil with some hemp protein fiber powder, put those into some lime colored/flavored capsules, and they'll be DELICIOUS! I'm also going to use some strawberry cough buds to do some THC pills, and put those into some strawberry flavored capsules

Here's some proof to the puddin'

if i was to use this method would it hurt to use a styrofoam container for my bucket?

motoracer110 said:

Hello fellow growers, I just completed my white widow hydroponics grow and was trying to find a good way to make hash so after looking at some youtube videos I thought I would go with the GUMBY method and it turned out great!!!!!!

Ok Here We Go!!!!! Sorry if the Pictures are too big.

Here is all the leaf cuttings from both of my white widow plants. make sure not to use big fan leaves as you are going to get a lot of contaminants in your hash

I then added cold water and ice to the mix then stirred using the mortar bit non-stop for at least 15 min to get all the THC crystals off the leaf material

Here is what the mix looks like about about 15 min of mixing

I then used a kitchen strainer to get all the leaf material and debris out of the water

This is what the liquid looks like after all the leafs are pulled out

Then you want to let the liquid sit for at least 4 hours without moving it to get all the good stuff to sink to the bottom

I then used a small air hose to siphon out all the water carefully making sure that im not disturbing the bottom layer of liquid

After about 20 min I got down to the bottom layer of liquid then stop siphoning

This is how much liquid I am left with

I then placed the liquid into a jar then let sit for another 4 hours and you can see the hash layer at the bottom of the jar

I then siphoned the water out of the jar making sure not to disturb the bottom crystals

This is what you are then left with

I then placed a baggy on top of another jar then dumped the remaining liquid out into the baggy

I then let the liquid sit for about 1 hour

Then i placed the jar into the oven with a light on top to evaporate the liquid (do not turn on the oven)

Here is what is left over after the water is evaporated

Here is the final product. you can roll it out into a ball or flatten it out

Hopefully this helps anyone with their hash making adventure, enjoy and grow on

Click to expand...

thanks bro will try this out next time tyvm for the info

[email protected] said:

if i was to use this method would it hurt to use a styrofoam container for my bucket?

Click to expand...

I can only think, that you'd rip pieces of foam off....While stirring.
Hash laced with tiny styrofoam bits. lOl
I'd stick to a Home Depot bucket, They are on sale for $2.78 by my house right now.

Great tutorial, I'll be trying this method once my grow is done. Do you know how much trim you used and how much hash you ended up with?