I was experimenting the other day with a box to dry my first harvest in.
I wanted something lightproof with a fan to exhaust moist air.

Supplies:

• A carboard box
• String
• 90mm PC fan
• Electrical flex
• A basic switch
• Duct tape

1. With a cardboard box measuring 52x49x24cm I cut a large flap panel on the front to allow easy access to the inside.
2. Using a sharp knife I cut out a hole big enough to allow sufficient air to flow out of the box through an exhaust fan to be placed at the top.
3. I mounted a 90mm PC fan on the outside of the box to work as an exhaust. Using a basic hobby switch I mounted onto the box I wired the fan direct onto my PC's motherboard where I have software to control the fan. I will probably use an AC plug once I get hold of one.
4. At the bottom I cut 4 holes to draw in fresh air into the box.
5. Threading string through the box I created 4 levels of 4 lines to hang my bud.
6. All remaining sides and gaps are taped up to ensure efficient air flow.

I'm going to cover the intake holes with some sort of filter before I put buds in the box.

Relative humidity ranges between 45-55% whether the fan is on or off
Temps are between 65-75oF (18-24oC).

Cheers

Attached Images

	DSC00718.jpg (50.8 KB, 36 views)
	DSC00730.jpg (51.7 KB, 36 views)
	DSC00726.jpg (54.4 KB, 27 views)
	DSC00722.jpg (49.4 KB, 25 views)
	DSC00719.jpg (52.5 KB, 39 views)
	DSC00728.jpg (46.6 KB, 22 views)

__________________

Nice. let us know how it works. I was going to do the same thing, but i'm currently using my box.

__________________
speaks louder than words.
Problems on the forum? Contact me here!

good one LOL

__________________
Is A She

whooo! that's one fine looking box.

Haha! I wish I had a box that big
Good job

__________________