Dmt

Well first you need to buy some mimosa hostills root. Then look up a tek, there are many, finding a legit one should be very easy. Im sure there are good ones on shroomery or hipforums or something.

Apparently it is really easy, Ive never extracted it. But I will someday when I got nothing better to do
*ask I walk outside and get hit by a car*

Haha, thanks man, I had a look on erowid, and found an alright looking guide not sure how legit it is though, here's the link.

http://www.erowid.org/plants/mimosa/mimosa_info1.shtml

First off safety first, you need a safety glasses and heavy dish washing gloves, preferably made of nitrile but latex will do. Wear long sleeves and pants. For equipment you will need at least two glass containers one of which should have a lid (some plastics are ok but glass will always be ok, so it's safer to buy glass and be sure), a separatory funnel or glass baster, a means of filtration (coffee filters in a metal strainer work), and a means o checking pH.

Soak ground up rootbark in pH=10.5-11 water (you'll need to add a little more base after it is poured on the bark, use a more concentrated solution rather than adding more lye directly to the solution) for a little, after a half hour (for later pulls let the bark sit in the basic water for 12-24hours) add ~1/4 the volume of the basic water worth of nonpolar solvent (heptane gives cleaner products but naphtha also works) and close the container. Shake vigorously for a minute. Separate the layers (if using a sep funnel you need to filter out the rootbark first), heptane (top) layer contains your DMT. Put it in a cold freezer (as cold as possible) overnight and you should see a precipitate of DMT freebase crystals. For subsequent pulls (I usually do 4 total) combine the NP layers and evaporate ~80-90% before freezing. You can get a slightly better product by first doing an acid wash then extracting with NP solvent (throw out the NP layer) before basifying and extracting but it's not needed.

I'm in!!!! Did anyone watch the Joe Rogan special on Netflix?

The acid base extraction is much better. Than an alcoholic one.

Originally Posted by MrEDuck

First off safety first, you need a safety glasses and heavy dish washing gloves, preferably made of nitrile but latex will do. Wear long sleeves and pants. For equipment you will need at least two glass containers one of which should have a lid (some plastics are ok but glass will always be ok, so it's safer to buy glass and be sure), a separatory funnel or glass baster, a means of filtration (coffee filters in a metal strainer work), and a means o checking pH.

Soak ground up rootbark in pH=10.5-11 water (you'll need to add a little more base after it is poured on the bark, use a more concentrated solution rather than adding more lye directly to the solution) for a little, after a half hour (for later pulls let the bark sit in the basic water for 12-24hours) add ~1/4 the volume of the basic water worth of nonpolar solvent (heptane gives cleaner products but naphtha also works) and close the container. Shake vigorously for a minute. Separate the layers (if using a sep funnel you need to filter out the rootbark first), heptane (top) layer contains your DMT. Put it in a cold freezer (as cold as possible) overnight and you should see a precipitate of DMT freebase crystals. For subsequent pulls (I usually do 4 total) combine the NP layers and evaporate ~80-90% before freezing. You can get a slightly better product by first doing an acid wash then extracting with NP solvent (throw out the NP layer) before basifying and extracting but it's not needed.

sounds like you know what your doing..... can you explain more about using the solvents and a little more detail on the extraction.... mabye a step by step?

is this form of dmt smokable? or is it for oral ingestion?

I'll write up a step by step tonight and post it.