Hi- this is my first grow. I am trying to improve my grow room and get it ready to cut and grow some clones. I was thinking to put up Poly film on three walls and hang in center of room to close of the light and condense the space its in.

This would make it 10X4 instead of 10 x13. SOund like a good idea?

Any other ideas that could improve this setup?

Attached Images

digicam.jpg (53.2 KB, 0 views)

__________________
Check out my grow below...

http://www.rollitup.org/grow-journal...ian-punch.html

right side up pic

Attached Images

digicam.jpg (53.0 KB, 0 views)

__________________
Check out my grow below...

http://www.rollitup.org/grow-journal...ian-punch.html

you should put up some walls. a wall with good reflective surface can increase yeild over 25%

__________________
http://www.rollitup.org/grow-journal...door-grow.html cfl-outdoor grow journal

yes put up the poly

__________________
I have never grown marijuana or intend to. Anything I post is knowledge gained from reading, not personal experience. Any pictures I post were aquired on the web or are fakes.

I would definately poly that, and add about 50 plants

How many plants are you wanting to go up to?

The closer the reflective surface, the more light is going to be reflected back to the plants.

Makes sense right?

Stick up the reflective poly sheeting on all sides, maybe make the space a bit smaller?

Try and neaten up the wires a bit too, it would suck if you got caught up in one. :P


Peace and happy growing.

__________________

ya- okay. Thanks. I would like to have around 30-50 more. But it just depends how many females come out of these five.

What do you make the walls out of? cardboard or?

__________________
Check out my grow below...

http://www.rollitup.org/grow-journal...ian-punch.html

just build a wooden frame and then stapel the poly to that

__________________
none of what i say is real and all my pic's are fake so ha!

how many watts is light?

__________________
Dutch Treat / Bubba Kush Journal
Dutch Treat Time Laps Video

ok- i've got the poly. will put it up soon as i get a chance- light is 1000W and it is on a light mover.

So i guess the easiest thing to do- is to throw poly on three walls and then making a small partition up until the air vent to close up the space a lil.

How far away from the light is it effective to have a plant?
(To give you an idea the ditance from the light box to the wall is 29" Exterior wall, 21" Left wall, 19" Right wall. At the lights farthest point.)
Does it make sense to just poly the walls and then build an Interior Poly wall say...29" away from light where there is currently no wall?

__________________
Check out my grow below...

http://www.rollitup.org/grow-journal...ian-punch.html