Page 9 of 33 FirstFirst ... 7891011 19 ... LastLast
Results 81 to 90 of 327
Like Tree1Likes
Grow Room Design & Setup

Building a stealth Super Cabinet (at least im trying)

in the

The Grow Room

forums; When I went to buy dynamat online, I thought that is what I was getting, but after I read the ...
  1. #81
    Stoner Stoner specialkayme's Avatar
    Join Date
    Mar 2008

    Posts
    911

    Default

    When I went to buy dynamat online, I thought that is what I was getting, but after I read the fine print (after I already purchased it) I found it was FatMat. I said fuck it and went with it anyway. Cheaper than dynamat, but I can't say if it works as well or better than it, I have never used dynamat.

    I think FullMetalJacket and I found it at the same time. Still sweet stuff, if only the blue decals didn't rub off on your hand

  2. #82
    Ganja Smoker Pot Head FullMetalJacket's Avatar
    Join Date
    May 2008

    Posts
    387

    Default

    SpecialKayme you actually turned me on to the fatmat, so I am blaming you if it doesnt work ...lol

    No but really i do apprciate the idea, ty

    I saw you using it on SouthFlorida's thread on the S&P fans. I went by Mattman0217 at that time but created an new account to start fresh..

  3. #83
    Mr.Ganja Mr. Ganja nickfury510's Avatar
    Join Date
    Mar 2008

    Location
    on an island in the east bay ca.
    Posts
    3,352

    Default

    Quote Originally Posted by FullMetalJacket View Post
    What are some ways I can mount the intake of the cool tubes 6" flexible ducting to the side of the cab? I would hast just to tape it up, but im sure that would work...

    Also if you look at the cool tube in my previous pics while it is in the cabinet..it looks really long ..its 27". Should I take an inch or two off of each end?
    i would use duct tape...........a whole bunch of duct tape

  4. #84
    Ganja Smoker Pot Head FullMetalJacket's Avatar
    Join Date
    May 2008

    Posts
    387

    Default

    LOL , you serious? I would hate to spend all this time on asthetics to just do that...but if thats the best way... i guess i could cover it with white tape after the aluminum and duct tape...

  5. #85
    Mr.Ganja Mr. Ganja nickfury510's Avatar
    Join Date
    Mar 2008

    Location
    on an island in the east bay ca.
    Posts
    3,352

    Default

    Quote Originally Posted by FullMetalJacket View Post
    LOL , you serious? I would hate to spend all this time on asthetics to just do that...but if thats the best way... i guess i could cover it with white tape after the aluminum and duct tape...
    if you want to be real clean you can use water heater straps an screw them through the cab with self tapping screws...or drill in about 3 or 4 eye bolts and use tie wire to hang it.....but both require drilling through the cab and sealing up the screw holes to keep it sound and sell proof....

  6. #86
    Ganja Smoker Pot Head FullMetalJacket's Avatar
    Join Date
    May 2008

    Posts
    387

    Default

    Good idea...TY.. i may also be able to find something metal that is round like that and use it as a flange and use the J&B welding solution to attach to my cab...

    I hate drilling man

  7. #87
    Stranger Stranger brettearl's Avatar
    Join Date
    May 2008

    Location
    ontario
    Posts
    6

    Default

    i built one similer to that it has worked out fine no one has ever found out what goods r inside lol

  8. #88
    Ganja Smoker Pot Head FullMetalJacket's Avatar
    Join Date
    May 2008

    Posts
    387

    Default

    Sounds good Brett..have any pics to share bro.. would love some ideas..

  9. #89
    Stoner Stoner HATCH's Avatar
    Join Date
    Dec 2007

    Location
    Texas,USA
    Posts
    811

    Default

    Prop's Bro, You have done a Most Exellent Job with the Metal. You have Mad Skill's.

    Good Luck.

  10. #90
    Mr.Ganja Mr. Ganja genfranco's Avatar
    Join Date
    Mar 2008

    Location
    Northern California
    Posts
    3,230

    Lightbulb

    wow... So i never had read all of the pages and stuff... but ..a plasma cutter... holy shit man.. how much does something like that run.... I did all my cuts with a 19.99 black and decker saw....



    you get some steel blades for another 19.99 max.. and your done... But having one of those plasma cutter around could be handy... like i said... whats the price of one of those.....

    Oh yeah.. you havea bucnh of people in this thread alone that would buy a cab from you... maybe you can build one or two and get back your money ... good job man..

Page 9 of 33 FirstFirst ... 7891011 19 ... LastLast

Similar Threads

  1. Building new Grow Cabinet
    By lagwag in forum Indoor Growing
    Replies: 8
    Last Post: 05-09-2008, 02:11 PM
  2. building a cabinet - which light setup to use?
    By ihavefeet in forum Grow Room Design & Setup
    Replies: 12
    Last Post: 05-09-2008, 01:05 PM
  3. Building cabinet for growing....advice?
    By seventynine in forum Grow Room Design & Setup
    Replies: 14
    Last Post: 01-26-2008, 03:08 PM
  4. super tight and super stealth
    By Skate Hawaii in forum Indoor Growing
    Replies: 4
    Last Post: 01-15-2008, 05:24 PM
  5. Building A Super System
    By stonecold in forum Hydroponics / Aeroponics
    Replies: 6
    Last Post: 09-23-2007, 06:53 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •