i have a grow cab:
armoire setup

one closet that measures 6'wide x 6'tall x 2'deep (picture attached) my plan is to use the grow cab to hold my mothers, and my clones. as for the closet..... i cant figure out how to set it up.

my goals: to harvest at least 2 Oz's every 2 weeks.

my supplies: 400w MH, 400w HPS, cooltube, 265cfm squirrel cage fan, 6" duct booster......Everything needed to grow in a cab, BUT! the whole point is to expand, i plan on using the HID's for the closet, and fluorescents for the mothers and clones. so i just need to figure out how to set up the closet....ebb&flo? leech trays w/ rockwool slabs? whatever we think up, its gotta be hydro.

i need to experts and pros to help me utalize the space in this skinny closet

__________________
Turn on, Tune in, Drop out...

dose anyone even have a thought?

__________________
Turn on, Tune in, Drop out...

You will need four areas, one every two wks. Each tray will needs it own nutes solution. IE 0-2, 2-4, 4-6, and 6-8(wks).

Will you be using both 400w hps and mh?

yes, im going to be using both 400's MH & HPS in the closet, it will be air cooled, and i really want a 6' light mover to make the most of the space and light, but we will see what the budget allowes.

ive decided to use Drip feed, or ebb & flow because of the low maintinence, im going to be busy enough cutting clones every week and cleaning up after every harvest. i was really hoping i could get away with just 2 nutrient solutions instead of indvidual ones for each 4 sets of plants. do you guys think can fit 20 plants in almost 13 square feet of closet?

__________________
Turn on, Tune in, Drop out...

If you can find the right size pot for them.....they'd all fit.

I do 1 plant per square foot.

Lollypop sog. and two solutions should work. I use 6" pots and 6 per tray in a 22" x 6' space and can run 5 trays if needed.

so ive been reading, and scratching my head, and checking out grow logs.... all the usual. this is what i came up with!

like i said 80 inches wide X 22 inches deep

the system im going to build is a 3' long fence post (5"x5") with 5 sites (3" netpots) im gonna use an ebb & flo adjustable drain fitting, so i can raise and lower the water level inside depending on root growth. im going to build 4 of them, and set them up with 2 rows of 2.

im going to have two types, a drip/top feed and an aeroponics. im going to use a 200-250 GPH pump with a 1/2" line feeding the 1/4"drip lines

for the aeroponic style, Im trying to figure out best pump to use for 6 360 degree sprayer (like the ones shown below)im gonna use the same 1/2" main line and 1/4" feeder lines, mounted through the top of the post with a grommet so i can pull each mister out and check/clean/repair indvidually.

help me to know what pump to use, i think im good using a low pressure/High Volume one around the 600GPH range?

__________________
Turn on, Tune in, Drop out...