Cooling 4 x 1000w with central A/C vent?

Please delete

Originally Posted by ogplease

Hey guys, would it be wise to cool 4 x 1000w Magnum XXL hoods w/ 6" duct using a central A/C vent and Y duct splitters set at 65 degrees and a 6" Can Fan at opposite end pulling? Had this going for a few days and it is working well but there is a lot of condensation on then splitter coming from A/C vent which is normal I guess. Only bad thing is if central AC runs while lights are off condensation builds up on the glass inside the hoods. Not concerned about electricity and have a 13,000 BTU dual hose running for the room. Any concerns about the setup?

i wouldn't do it for 2 reasons. 1 is the condensation that you mentioned and the other is the pull you will be putting on your air handler and the blower inside of it. when the a/c is off you will be pulling air through the blower and might do damage to the motor of the unit.