Hello,
I've asked many questions and looked for much advice through people on here and reading and i think ive come up with all the components i need to set up my grow room ready for when i get a tad more money come in to buy the soil, nutes and seeds
Ok if all goes well ill be supporting the inside with brackets and converting my chest of drawers into a stealth box. This is how i plan on doing it
Chest of drawers is roughly 28 inches wide, 25-26 inches height and 15-16 inches depth.
- First i have to try and support top of drawers as word has bowed so the door fits snug
- I will then cut 3 pieces of plywood out to strengthen my drawers 2 for the back of drawers, 1 piece for the bottom and the last bit for my stealth door ( will look sweet if i manage to pull off )
- I will remove all the draws then support frame a little bit for durability
- I will remove the face of all 3 drawers ( which is what the handles r attached to ) and ill screw these into the piece of plywood earlier fromt he inside so u cant see the screws from the outside
- I will then place the hinges on the inside of drawers and attached to the new covert door ive made ( from the outside it will hopefully look like 3 sets of drawers still with handles and everything but infact its a solid door )
I plan on using 3 pc fans for now maybe more will be needed not sure yet, one will be on top of chest of drawers which the sound system will be in front to cover from prioring eyes but will not block air flow ( outflow fan ), and the last 2 either side of drawers near middle of depth to keep the box cool ( inflow fans )
Im planning on hangin 2 surge protectors from the ceiling of drawers with 8 bulbs attached
I know it maybe hard to understand what i wrote above but im kinda tired from work
Ok equipment i plan on using and prices hopefully
-Ecosmart 27 Watt Daylight Twin Pack (100 Watt Equivalent) http://www.amazon.com/gp/product/B0049ECZO2/ref=ord_cart_shr?ie=UTF8&m=A2JFF3R9GWVBZS x 4 packs ( for vegging, ill get flowering later when needed )
-Leviton Ivory Plug-In Light Socket Outlet Adapter Plug
http://www.amazon.com/gp/product/B000VL4CFC/ref=ord_cart_shr?ie=UTF8&m=AP9TLT2LX6QXYx 10 ( maybe to many but spares if anything goes wrong )
-Tripp Lite TLP604 6-Outlet Surge Protector (720 Joules, 4ft Cord)
http://www.amazon.com/gp/product/B00006L4F1/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DER x 3
-SilverStone Case Fan Sleeve Bearing with 120mm 9 blades 26.6 Db FN121 (A) - Retail
http://www.amazon.com/gp/product/B000C1DXLU/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DERx 3
-Leviton 128-I 15 Amp, 660 Watt, 250 Light Socket Adapter, Ivory
http://www.amazon.com/gp/product/B001ATG0JU/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DERx 4
-12V 1A Switching Power Supply Adapter for CCTV Camera
http://cgi.ebay.com/12V-1A-Switching-Power-Supply-Adapter-CCTV-Camera-/170549304361?pt=LH_DefaultDomain_0&hash=item27b587dc29 x 2 ( for the pc fans )
Total - $125.84/£77.77 ( fingers crossed thats right )
Thats all my parts tog et started apart from filters which ill get at later date, flowering bulbs which again later date, and the plywood.
I have not ordered anything its all sitting in cart wiating to be purchased if all looks well and sounds well from you guys/girls.
Ok what im looking for from people with experience and knowledge is
- What u think of my plan for design?
- what you think on the equipment i have choose?
- Would u recommend i change anything if so what to and why?
Bare in mind this if my first grow i want it to be fairly good groth and learning wise aswell as not a great expense.
thx
regards
ben
I've asked many questions and looked for much advice through people on here and reading and i think ive come up with all the components i need to set up my grow room ready for when i get a tad more money come in to buy the soil, nutes and seeds
Ok if all goes well ill be supporting the inside with brackets and converting my chest of drawers into a stealth box. This is how i plan on doing it
Chest of drawers is roughly 28 inches wide, 25-26 inches height and 15-16 inches depth.
- First i have to try and support top of drawers as word has bowed so the door fits snug
- I will then cut 3 pieces of plywood out to strengthen my drawers 2 for the back of drawers, 1 piece for the bottom and the last bit for my stealth door ( will look sweet if i manage to pull off )
- I will remove all the draws then support frame a little bit for durability
- I will remove the face of all 3 drawers ( which is what the handles r attached to ) and ill screw these into the piece of plywood earlier fromt he inside so u cant see the screws from the outside
- I will then place the hinges on the inside of drawers and attached to the new covert door ive made ( from the outside it will hopefully look like 3 sets of drawers still with handles and everything but infact its a solid door )
I plan on using 3 pc fans for now maybe more will be needed not sure yet, one will be on top of chest of drawers which the sound system will be in front to cover from prioring eyes but will not block air flow ( outflow fan ), and the last 2 either side of drawers near middle of depth to keep the box cool ( inflow fans )
Im planning on hangin 2 surge protectors from the ceiling of drawers with 8 bulbs attached
I know it maybe hard to understand what i wrote above but im kinda tired from work
Ok equipment i plan on using and prices hopefully
-Ecosmart 27 Watt Daylight Twin Pack (100 Watt Equivalent) http://www.amazon.com/gp/product/B0049ECZO2/ref=ord_cart_shr?ie=UTF8&m=A2JFF3R9GWVBZS x 4 packs ( for vegging, ill get flowering later when needed )
-Leviton Ivory Plug-In Light Socket Outlet Adapter Plug
http://www.amazon.com/gp/product/B000VL4CFC/ref=ord_cart_shr?ie=UTF8&m=AP9TLT2LX6QXYx 10 ( maybe to many but spares if anything goes wrong )
-Tripp Lite TLP604 6-Outlet Surge Protector (720 Joules, 4ft Cord)
http://www.amazon.com/gp/product/B00006L4F1/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DER x 3
-SilverStone Case Fan Sleeve Bearing with 120mm 9 blades 26.6 Db FN121 (A) - Retail
http://www.amazon.com/gp/product/B000C1DXLU/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DERx 3
-Leviton 128-I 15 Amp, 660 Watt, 250 Light Socket Adapter, Ivory
http://www.amazon.com/gp/product/B001ATG0JU/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DERx 4
-12V 1A Switching Power Supply Adapter for CCTV Camera
http://cgi.ebay.com/12V-1A-Switching-Power-Supply-Adapter-CCTV-Camera-/170549304361?pt=LH_DefaultDomain_0&hash=item27b587dc29 x 2 ( for the pc fans )
Total - $125.84/£77.77 ( fingers crossed thats right )
Thats all my parts tog et started apart from filters which ill get at later date, flowering bulbs which again later date, and the plywood.
I have not ordered anything its all sitting in cart wiating to be purchased if all looks well and sounds well from you guys/girls.
Ok what im looking for from people with experience and knowledge is
- What u think of my plan for design?
- what you think on the equipment i have choose?
- Would u recommend i change anything if so what to and why?
Bare in mind this if my first grow i want it to be fairly good groth and learning wise aswell as not a great expense.
thx
regards
ben