I made this thread to provide ideas for the people here who know for a fact they have what it takes to grow indoor but just cant because of there parents and the poor people like me lol! If i leave any important things out please let me know however you can. If anyone needs help along the way i can help ya.

ok here's some ideas on what you'll need to complete this set up or a similar one. (you do not need all of these to complete setup obviously you can ghetto rig some of these things to make up for it the decision is yours I'm simply telling you what i used to make my setup run


A wardrobe or dresser this is what i used for example it has doors for added protection and stealth

Reflective foil
1 gallon milk jug cut at the top per plant
A decent soil with good n/p/k
1 or 2 computer fans
2 23 watt cool white cfls, 1 Full spectrum cfl, and 1 warm cfl.
Fixtures to house the lights
Hinges
Basic set of tools to work with including a saw of some kind, tape measure, and screwdrivers


Before i get started i want you guys to know that constructing this thing is the hardest part and has to be done when parents are gone because of noise and privacy issues, it cant be stealthy if they see you building it lol. Happy Building and Good luck this build is small but is no picnic lol

Construction Phase:

First we need to take the drawers out and if needed place wood for the floor section for support.
Once the drawers are out you need to put the reflective foil on the walls, roof, and floor for added light reflection get the best out of your bulbs!


Before you do anything to the drawers make sure that you will be able to make the cabinets in this tutorial. If you cannot maybe because the way your dresser is built and the drawers are exposed don't worry i will have a post about an alternative option.

First we need to measure the length and height of the opening for the cabinet doors to go. Once you have the measurements, you need to find a strong piece of wood colored the same way as the dresser or drawers for added stealthiness.(its ok if its not the same color as long as it doesn't compromise stealthiness. When you find the wood you need to cut that piece of wood using your measurements for Length+Height and make sure it fits into the slot (it should still be one piece of wood at this point), If it does then you need to cut that piece directly down the middle to make 2 cabinet doors you can use measurements for this cut too.
This is one of my custom made cabinet doors.


(remember this is a stealthy grow we do not want to get caught growing so be smart about what you do!)

Once we have the doors ready an the doors fit putting handles on the doors is encouraged at this point, we now hinge them to the sides it should look something like this. Putting a handle on the doors is encouraged at this point. (I used 2 hinges for each side this is the top hinge i have a bottom hinge out of the picture)

But wait what happens if my dresser drawers show and i cant make the cabinets....good question. picture like 2 or 3 false drawers (how ever many drawers you took out 2 in my case) your gonna need to take apart the drawers without damaging the front part which we well use to make false drawers. I had this setup until i got fed up with how difficult it was to get into the room and put the drawers back on, unless you can find another way to use the drawer fronts. but hey you wanna grow right? then you gotta deal with it.

The front part we want is the part facing up and the only part of the drawer seen when its in the dresser. Take the parts connecting to the front part and throw it away or keep in a safe place that wont raise questions


Once we have all our front parts of the drawer lets start with putting them on. First we need to screw the bottom drawer in the bottom left corner to a wood piece inside, same for the bottom right side. (I had to drill this by hand using a semi big screw and a screwdriver so no complaints lol) If you have a middle drawer, screw that one on the middle left side and middle right side of the drawer. If your top drawer is at the top of your dresser you can screw from the top down meaning the screw will be in the dresser pointed down into the top drawer, do this on both sides.

Does anyone know how to delete posts....

ok so now are room is fully ready to grow and should look a little like this but were not done yet!

There you go. Good luck!

lol ... how to grow pot as a teenager and get kicked out of the house, get some chick knocked up and become addicted to meth

i can see the future

__________________
"From the land of pleasant living"

Serious Seeds AK47 400wHPS Tent

ive had a couple good grows from this an got plenty more than i needed so hop off kid