I've got a 1000w hps and decided that I'm going to have to run a cool tube of some sort. The hood is set up perfect to just put some glass on the bottom of it.
My question is (1) has any one used a stanley like this one? http://www.acehardwaresuperstore.com...25.html?ref=42
Some peeps on another thread said might not handle 24 hr on time. Any one have first hand experience with stanley fans?
(2) if I run a six inch vent to the light and suck with that fan, could I use that to vent the room also?

you want to put tempered glass in your hood.
i use a stanley blower and it really moves the air. i have it set up with a 6" ducting. 7" passive intake. i reccomend an 8" passive intake minimum though. i havnt run 24 hours straight as of yet. its hooked up to a honeywell thermostat and when it runs it doesnt run for very long. i will be useing the cooltube in about 2 weeks or so. my room is 250 cu. ft. im taking a 6" to 4" reducer and drilling holes in it for the ceiling area and a 4" hose coming off for the cooltube. i can put tape over a hole or 2 if needed to increas flow to cooltube if needed.


i

__________________

how to use an industrial low bay light fixture
http://www.rollitup.org/do-yourself/...l-low-bay.html

Thx for the pics. I was worried it'd be hard to hook up to side of blower but looks like you did it easily. Any recomendations on where to get tempered glass?

wrong info

__________________

how to use an industrial low bay light fixture
http://www.rollitup.org/do-yourself/...l-low-bay.html

you may have to google for that. find someplace that has it and they will precut. you may be able to get from a store that sells the same kind of hood you have.

__________________

how to use an industrial low bay light fixture
http://www.rollitup.org/do-yourself/...l-low-bay.html