Forum Shop Market
Seeds FAQ Tools
SEE OUR MARIJUANA SEED GUIDE FOR THE BEST STRAINS
Looking for Legal Marijuana look no further!
  #1    
Old 04-11-2009, 02:04 PM
Twenty Past Four's Avatar
Learning How To Roll
Learning How To Roll
Twenty Past Four is offline
 
Join Date: Mar 2009
Posts: 39
Twenty Past Four is on a distinguished road
Points: 408, Level: 3 Points: 408, Level: 3 Points: 408, Level: 3
Activity: 0% Activity: 0% Activity: 0%
Exclamation Got Smell? Try This 20$ DIY Odor Remover
If your room is reakin, and you don't have ventilation to use a carbon filter/scrubber, this may work well for you. This is a very low power and compact smell eliminator. and it works for my closet grow and im sure it would cover the smell from a medium size grow. for about 20 dollars The materials needed are:

1 bottle of ONA (odor neutralizing agent) [try your local hydroponic/gardening store or search the internet. i picked up about a liter for 20 bucks and its prolly a lot more than i need]
1 computer fan*
1 half gallon milk jug
1 pair of scissors
1 exacto knife
1 roll of duct tape
1 A/C plug in cord OR correct voltage A/C-D/C converter
1 soldering iron + solder
1 roll of electrical tape
1 piece of cardboard that is larger than the milk jug

*The type of computer fan you are able to get will determine whether you need a A/C-D/C converter or just a wall plug in cord.

Now that you have all of your materials you can begin.

cut the bottom half of the milk jug off. discard the top half we'll call it the base now

if you must, cut the cardboard so you can place it on top of the base.

cut a hole the size of the fan in the carboard MAKE SURE THE FAN IS BLOWING INTO THE BASE and secure the fan to the carboard. take extra care to make sure it wont fall

tape the cardboard to the base. again make sure it is done tightly.

now take your knife and cut one rectangular hole on each side. leave some so you dont ruin your the base

*for an AC fan strip the two wires coming off the fan. take your plug in and it should have a good length of wire to it and strip the ends to expose some wire. solder the two parts together. wrap with electrical tape to eliminate a shock hazard.

*for a DC fan have all your wires stripped and remember red = positive black = negative. 100% of the time there is one of those colors so you can figure it out i hope. put red to red and black to black. solder and tape to finish your assembly

Pour in the ONA plug in the fan a steady flow of air should be coming out of the holes and within minutes smell is gone.

im tellin ya this stuff works awesome. I was testing it and my mom walks in my room smoking a cigarette. she was like 4ft away and i couldnt smell the smoke at all. just clean laundry. moved it into the growroom after it started to smell and now that sweet bud smell is gone.. after the ONA dries up you just add water and voila! its back to life.
Reply With Quote
  #2    
Old 04-12-2009, 09:14 AM
Twenty Past Four's Avatar
Learning How To Roll
Learning How To Roll
Twenty Past Four is offline
 
Join Date: Mar 2009
Posts: 39
Twenty Past Four is on a distinguished road
Points: 408, Level: 3 Points: 408, Level: 3 Points: 408, Level: 3
Activity: 0% Activity: 0% Activity: 0%
bump for the world to see
Reply With Quote
  #3    
Old 04-12-2009, 09:40 AM
lurkmaster's Avatar
Teaching How To Roll
Mr. Ganja
lurkmaster is offline
 
Join Date: Jan 2009
Posts: 1,313
lurkmaster is a jewel in the roughlurkmaster is a jewel in the roughlurkmaster is a jewel in the rough
Points: 25,063, Level: 22 Points: 25,063, Level: 22 Points: 25,063, Level: 22
Activity: 0% Activity: 0% Activity: 0%
pics would probably help.
__________________
LMLMLMLMLMLMLMLM[]MLMLMLMLMLMLMLMLM
LMLMLMLMLM [Aero CFL 12/12 from seed] LMLMLMLMLMLM
LMLMLMLMLM [DIY Aeroponics made Easy!] LMLMLMLMLMLM
Reply With Quote
  #4    
Old 04-12-2009, 09:45 AM
moose88's Avatar
420 TIME
Stoner
moose88 is offline
 
Join Date: Nov 2008
Location: not
Posts: 421
moose88 is on a distinguished road
Points: 1,683, Level: 6 Points: 1,683, Level: 6 Points: 1,683, Level: 6
Activity: 0% Activity: 0% Activity: 0%
thats pretty cool ive got 4x4 with scrog 10 plants and im venting heat into wall and you think itll cover of smell comming out of closet?.......
__________________
when in doubt take another rip
Reply With Quote
  #5    
Old 04-12-2009, 01:24 PM
Twenty Past Four's Avatar
Learning How To Roll
Learning How To Roll
Twenty Past Four is offline
 
Join Date: Mar 2009
Posts: 39
Twenty Past Four is on a distinguished road
Points: 408, Level: 3 Points: 408, Level: 3 Points: 408, Level: 3
Activity: 0% Activity: 0% Activity: 0%
yeah i do think it will work. its pretty awesome stuff and i definitely think its worth a shot
Reply With Quote
  #6    
Old 04-12-2009, 01:25 PM
Twenty Past Four's Avatar
Learning How To Roll
Learning How To Roll
Twenty Past Four is offline
 
Join Date: Mar 2009
Posts: 39
Twenty Past Four is on a distinguished road
Points: 408, Level: 3 Points: 408, Level: 3 Points: 408, Level: 3
Activity: 0% Activity: 0% Activity: 0%
Quote:
Originally Posted by lurkmaster View Post
pics would probably help.
ill try to get some pics asap
Reply With Quote
  #7    
Old 04-12-2009, 02:23 PM
skybike's Avatar
Able To Roll A Joint
Able to roll a joint
skybike is offline
 
Join Date: Mar 2009
Posts: 99
skybike is on a distinguished road
Points: 612, Level: 3 Points: 612, Level: 3 Points: 612, Level: 3
Activity: 0% Activity: 0% Activity: 0%
If you're using ONA liquid then may I suggest you pick up some polymer crystals, such as AquaSorb. The dehydrated crystals soak up the liquid up to 200 times their weight making the ONA last longer. I too have been using ONA in a similar fashion, it is a good product. However, the smell of the ona and weed begins to mingle after a while so I decided to pick up a carbon filter. I thought ONA would solve all my problems, I was naive. Carbon filters are still the way to go, I can barely even smell the ona let alone weed. Together though they make odors disappear quite nicely.
__________________
Eat failure, shit success.
Check out my grow journal at http://www.rollitup.org/grow-journal...ml#post2234004
 

Tags
20$, diy, odor, remover, smell

Thread Tools
Display Modes

Thread

Thread Starter

Forum

Replies

Last Post

Stealth Hydro Bubbleponics Systems Roseman DWC/ Bubbleponics 17598 12-01-2009 08:18 PM
Make your bud smell like grapes : ) jackinthebox Newbie Central 22 10-27-2009 10:33 AM
Harvesting...!!!!.HELP!!!! BUDS SMELL GRASSY AFTER TRIMMING JDawg701 Harvesting And Curing 49 05-01-2009 07:04 PM
Smell blunted24/7 Newbie Central 2 10-29-2007 10:13 PM
Hiding the Smell (part deux) K2THELEW Indoor Growing 2 05-16-2007 11:45 PM

Posting Rules

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Come Check out a new Poker Forum for the online poker community

All times are GMT -7. The time now is 10:26 PM.
Powered by vBulletin
Copyright © 2000-2009 Jelsoft Enterprises Limited.

Content Relevant URLs by vBSEO 3.3.2