Forum Shop Market
Seeds FAQ Tools
SEE OUR MARIJUANA SEED GUIDE FOR THE BEST STRAINS
Looking for Legal Marijuana look no further!
Live Chat Arcade Register Search Today's Posts Mark Forums Read
Go Back   Marijuana Growing > The Grow Room > Grow Room Design & Setup
Reload this Page DIY Cool Tube How-To
Page 8 of 8 « First 67 8


Reply
 
LinkBack Thread Tools Display Modes
  #71    
Old 05-23-2009, 02:52 AM
Teaching How To Roll
Mr. Ganja
dbo24242 is offline 		 
Join Date: Feb 2009
Location: canuckistan
Posts: 1,562
dbo24242 has a spectacular aura aboutdbo24242 has a spectacular aura about
Points: 12,379, Level: 16 Points: 12,379, Level: 16 Points: 12,379, Level: 16
Activity: 8% Activity: 8% Activity: 8%
permalink
nice, problem with breadtube = 4" capacity
__________________
Reply With Quote
  #72    
Old 05-25-2009, 05:03 PM
Ganja Smoker
Pot Head
bam bam is offline 		 
Join Date: May 2009
Posts: 245
bam bam is on a distinguished road
Points: 1,357, Level: 5 Points: 1,357, Level: 5 Points: 1,357, Level: 5
Activity: 0% Activity: 0% Activity: 0%
permalink
Quote:
Originally Posted by 7th1der View Post
I would probably use epoxy, but I am sure that most will use caulking. Thanks for adding to the bookmarks. Glad I could contribute to peoples cabinets. lol And I aint even start my cabinet yet. lol
Hey what kind of specific expoxy did you guys use? Do you think super glue for glass will work?
Reply With Quote
  #73    
Old 06-27-2009, 11:18 PM
Stranger
Stranger
Buuudy is offline 		 
Join Date: Jun 2009
Posts: 22
Buuudy is on a distinguished road
Points: 236, Level: 2 Points: 236, Level: 2 Points: 236, Level: 2
Activity: 0% Activity: 0% Activity: 0%
permalink
Hey 7th great tutorial. I have been looking to make one and this is the best most simple one I have found.

Quick question for you, or anyone....

My cabinet is only about 2 feet wide. Im going to run the ducting from the outside of the cabinet to the inside which will connect to the bake around, then ducting again going out the cabinet. My fan will be on the outside pushing air through the cool tube. Do I need something like a Stanley blower to push the air or can I use a small normal fan?
Reply With Quote
  #74    
Old 06-27-2009, 11:27 PM
WoldofWeedcraft's Avatar
Stoner
Stoner
WoldofWeedcraft is offline 		 
Join Date: Dec 2007
Posts: 840
WoldofWeedcraft has a spectacular aura aboutWoldofWeedcraft has a spectacular aura about
Points: 9,087, Level: 13 Points: 9,087, Level: 13 Points: 9,087, Level: 13
Activity: 0% Activity: 0% Activity: 0%
permalink
Quote:
Originally Posted by Buuudy View Post
Hey 7th great tutorial. I have been looking to make one and this is the best most simple one I have found.

Quick question for you, or anyone....

My cabinet is only about 2 feet wide. Im going to run the ducting from the outside of the cabinet to the inside which will connect to the bake around, then ducting again going out the cabinet. My fan will be on the outside pushing air through the cool tube. Do I need something like a Stanley blower to push the air or can I use a small normal fan?
What kind of wattage are you running? If you have 400+ watts, you want a good high CFM inline fan (not a cheap home depot one). It's best to pull air from the grow room through your cool tube and exhausting air out of the cabinet. The fan should be mounted up high, and have a passive intake hole at the bottom for fresh intake.
__________________
D.I.whY? Because I CAN!
Reply With Quote
  #75    
Old 06-27-2009, 11:34 PM
Stranger
Stranger
Buuudy is offline 		 
Join Date: Jun 2009
Posts: 22
Buuudy is on a distinguished road
Points: 236, Level: 2 Points: 236, Level: 2 Points: 236, Level: 2
Activity: 0% Activity: 0% Activity: 0%
permalink
Quote:
Originally Posted by WoldofWeedcraft View Post
What kind of wattage are you running? If you have 400+ watts, you want a good high CFM inline fan (not a cheap home depot one). It's best to pull air from the grow room through your cool tube and exhausting air out of the cabinet. The fan should be mounted up high, and have a passive intake hole at the bottom for fresh intake.
I have a 400w hps. I have an inline fan and a circulating fan, and the cabinet is open most of the time while the light is on.
Reply With Quote
  #76    
Old 06-28-2009, 01:26 PM
Stranger
Stranger
gattracksuknome is offline 		 
Join Date: Jun 2009
Posts: 2
gattracksuknome is on a distinguished road
Points: 16, Level: 1 Points: 16, Level: 1 Points: 16, Level: 1
Activity: 0% Activity: 0% Activity: 0%
permalink
could something like this be made out of plexi glass, idk what percentage of light would get through?
Reply With Quote
  #77    
Old 10-07-2009, 01:08 PM
loolagigi's Avatar
Stoner
Mr. Ganja
loolagigi is offline 		 
Join Date: Feb 2008
Posts: 1,118
loolagigi is a jewel in the roughloolagigi is a jewel in the roughloolagigi is a jewel in the rough
Points: 10,657, Level: 15 Points: 10,657, Level: 15 Points: 10,657, Level: 15
Activity: 5% Activity: 5% Activity: 5%
permalink
lets keep this thread going, i have a bake a round on its way. growing in a cabinet with a 465 cfm fan and comp fans for intake. ganna use my 400 eye hortilux for flowering. whoo hooo.
__________________

BLOOD BUBBLES->http://www.rollitup.org/grow-journal...d-journal.html
Reply With Quote
  #78    
Old 11-07-2009, 04:35 AM
brainwav93's Avatar
Stranger
Stranger
brainwav93 is offline 		 
Join Date: Dec 2008
Posts: 24
brainwav93 is on a distinguished road
Points: 869, Level: 4 Points: 869, Level: 4 Points: 869, Level: 4
Activity: 0% Activity: 0% Activity: 0%
permalink
I'm having some trouble building a somewhat similar project.
Were the bakearounds made in more than one size? Mine is almost exactly 3 3/4 OD, but the "4 inch" pvc stocked here, is 4 1/4 ID. i'm having a lot of trouble getting a good fit even with the door trim foam, so it looks like i darn well better build wire braces between the end pieces. I'm building a semi-cylinder reflector out of steel flashing, i'd like to hear thoughts on how to attach reflectors, how far they should be from the tube, etc.
Reply With Quote
  #79    
Old 11-07-2009, 04:50 AM
Stranger
Stranger
newgrower21 is offline 		 
Join Date: Oct 2009
Posts: 12
newgrower21 is on a distinguished road
Points: 101, Level: 1 Points: 101, Level: 1 Points: 101, Level: 1
Activity: 0% Activity: 0% Activity: 0%
permalink
ur set that hair on fire !!!!!
 
Page 8 of 8 « First 67 8

Tags
cool, diy, howto, tube

« The Start of a Attic Grow Room | Noob--Co2 waste »
Thread Tools
Display Modes
Linear Mode Linear Mode

Thread

Thread Starter

Forum

Replies

Last Post
Using clear pvc tube instead of glass for "cool tube"? Dr. Green Merkin Grow Room Design & Setup 20 03-10-2009 09:02 AM
Cool Tube dtankd Indoor Growing 3 10-17-2008 06:23 PM
alt. cool tube smokindope Indoor Growing 3 08-12-2008 01:43 PM
Cool Tube fletchasketch Grow Room Design & Setup 3 11-16-2007 01:43 PM
Dual cool Tubes or dual bulbs in single cool tube sighko1 Grow Room Design & Setup 1 10-25-2007 04:42 PM

Posting Rules

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Come Check out a new Poker Forum for the online poker community

All times are GMT -7. The time now is 08:14 AM.
Powered by vBulletin
Copyright © 2000-2009 Jelsoft Enterprises Limited.

Content Relevant URLs by vBSEO 3.3.2