walk in closet grow

**J.H. Enterprise** · 10-11-2008, 11:52 AM

3 ft deep by 5 ft wide by 8 ft high is the dimensions on my closet and i need help choosing lights and how to ventilate heat and smell with out cutting holes so please help this is my first grow need help bad so take a look at my room here a pic

**mane2008** · 10-11-2008, 11:56 AM

how many plants do you plan on doing?
for ventilation an inline fan will do you good

400-600w more like 600w

is that a shop light? get it closer on those two bigger ones,
for finding some lights etc. i got a thread about that in;
General Mj Growing it's the sticky at the top of the page...

**J.H. Enterprise** · 10-11-2008, 12:02 PM

i have six jack herer clones that are one day old so minimum six possibly ten wat and were is an inline fan and does it cover smell?

**J.H. Enterprise** · 10-11-2008, 12:03 PM

ya thats a shop light with 2 fluorescents

**asher187** · 10-11-2008, 12:24 PM

400w = 3x3
600w = 4x4
1000w= 5x5

I would use separate areas for each stage of growth. The plants in your pictures can actually touch those Tubes so get them 1-2" away and a fan on them. (check my photos) Buy or build a cheap 4' X 4' 18/6 closet for them flouros (and you could use more) I have an 8X2 closet split into 2 2X4 areas and I hate the light leakage I had to deal with. Use a lamp reflector called a cool tube and black/white poly sheet from your local Hydro shop (or online). You can cut holes onto the poly sheet and use cheap aluminum foil ducting from Ace Hardware ($21 for 20') to vent the heat. Then you need to route the heat out of the room. Ordor control is a snap use one of these for each Room you need to control smell eBay Store - For Your Good Morning 01: N Ion Ionic Air Purifiers, Air Cleaner Purifiers, Negative Ion Air

Oh yeah forgot to mention while your at ace pick up some Velcro

**J.H. Enterprise** · 10-11-2008, 12:41 PM

were do i go with the heat or duct vent stuff i cant cut any holes?

**mane2008** · 10-11-2008, 01:17 PM

Originally Posted by J.H. Enterprise

i have six jack herer clones that are one day old so minimum six possibly ten wat and were is an inline fan and does it cover smell?

there's the link for you to look at lights etc

well 6-10, a 600w can do about 8 10would push it.
inline fan is something that exhaust heat, cool lights.
carbon filters cover the smell. I wouldnt use a air purifier they wont cover the smell good at all, you want it gone not covered anyway.

**E S** · 10-11-2008, 01:34 PM

I can get 5 x 5 with my 600. As for cooling....without holes in things?..... you need a window unit a/c and a couple fans with open doors so it might cramp your lifestyle like that.

**J.H. Enterprise** · 10-11-2008, 01:37 PM

ES thanks but wat if i got another door to put on the closet so that i can cut holes in it and stuff then how would i do it can you explain

**E S** · 10-11-2008, 01:52 PM

You either need a carbon filter in the closet exhausted outside the house or to an attic/crawl space (or not if it's winter) Or you need a hole for intake and another for exhaust. You gotta have duct run in a circuit so the plants environment doesn't mix with the ducted air.