been a while between doing much on here long time member and lurker ive just had a kid and am already on probation for growing marijuana so now its either say goodbye to mary or hello to stealth. i choose the latter

i recently aquired an old fridge freezer and started tinkering. my cameras out atm so ill edit with pics
freezer (top) 410mm wide 390mm deep and 300mm high i have put a board in there 300 across making a 300x300 square 390mm deep for growing and a small utility room for timers, plugs ect. The floor in the grow area is a kitty litter tray with a drain hole cut, this tray sits on a low line lunch box of the same size, at the back there are 2 pots of perlite with drippers from the lunchbox/res underneath, that leaves me with 300x290 for a cloner i am yet to build this but am thinking along the lines of a bubbler but could be persuaded otherwise any ideas? in this cab there are 2 cfls both cool white im hoping to bonsai mothers in the pots with drippers and just root the clones in there veg to maybe 6-7"
fridge (bottom) 450mm wide 400mm deep 800mm high im gonna use cfls for stealth and electricity cost, but could probabily put a 250w in there im using a frame on chains that house 8 cfls in 2 rows of 4 with a pc fan per row for cooling sitting on the base is a tub that is 170mm deep i have 2 air stones and a pump in there with 4 5" net pots with hydroton approx 300mm from base or 130mm from res/system i have put one of the shelfs in place they are plastic coasted metal wire shelfs perfect scrog screen im hoping to goe to about 7" in the freezer then veg for 1 or 2 weeks then 12/12 8 weeks flower. Im aiming at at least 4 oz a cycle as i smoke half oz minimum a week. Any input ideas or suggestions would be appreciated

