This is going to be my first grow, so bear with me. I'll be posting as much as I can, with pictures, and I'd like for you experienced growers to drop knowledge.

My grow room is a 3x3x6.5 Hydrohut, which is basically a pre-made room that can be zipped up -- very clean but limited space. In it I have a 40 gallon resevoir, which sits under a wooden frame I made of 2x4's to support the 3x3 tray that holds the goods. In the tray I have 3 rows of 4 coconut cubes and hydroton everywhere in between.

The first row is Snow Cap. The second and third rows are C-4. I bought them as clones and put them in the coconut cubes.

They are under a 1000w MH light and have been vegging for exactly a week since I got them. In my hut I also have two 50 cfm fans blowing air in through ducts and two 50 cfm fans at the top of the hut sucking air out, 4 total.


Picture 1: Setup, Picture 2: Lighting, Picture 3-5: Rows 1 2 and 3, respectively.

Attached Images

	PICT1059.jpg (518.0 KB, 639 views)
	PICT1061.jpg (369.7 KB, 264 views)
	PICT1041.jpg (599.4 KB, 275 views)
	PICT1042.jpg (560.7 KB, 201 views)
	PICT1043.jpg (538.6 KB, 232 views)

Very nice setup man. Looks like you have a lot of time in it.

__________________

I'll use numbers to identify each plant. Plants 1-4 are the first row, starting with 1 in the front. 5-8 are row two, and 9-12 row three, same pattern.

Here's what row 1 (Snow Cap) looks like one week after planting the clones in the cubes:

Attached Images

	PICT1044.jpg (600.8 KB, 102 views)
	PICT1045.jpg (568.4 KB, 75 views)
	PICT1048.jpg (583.1 KB, 82 views)
	PICT1050.jpg (568.6 KB, 76 views)

I don't know too much about hydroponics but are you useing nutes yet?

__________________

Row 2 (C-4):

Attached Images

	PICT1051.jpg (701.0 KB, 42 views)
	PICT1052.jpg (688.6 KB, 20 views)
	PICT1053.jpg (699.9 KB, 30 views)
	PICT1054.jpg (541.8 KB, 21 views)

Row 3 (C-4):

Attached Images

	PICT1055.jpg (617.6 KB, 10 views)
	PICT1056.jpg (516.1 KB, 10 views)
	PICT1057.jpg (611.2 KB, 21 views)
	PICT1058.jpg (518.1 KB, 18 views)

Thanks ablazed, I tried to plan it out as best as I could, it's cost me quite some time and money, but now that everything's set up it should be fairly simple.

Yes, I have been using nutes. At the hydro store, I got a print-out from the guy with suggested nutes for vegging and flowering stages, specific for my 40 gal res. A week into it, I can see that I should have cut back on the nutes, so I'm flushing the tray and refilling the resevoir, this time with less nutes than recommended, I'm thinking half--maybe less.

Tonight is the start of week two. I flushed the tray and refilled the res. I also took some pics of the plants that seemed to be having problems. Hopefully they like the water better this time.

The pics are of plants 2 3 4 and 11, respectively.

Attached Images

	PICT1063.jpg (600.7 KB, 112 views)
	PICT1064.jpg (644.0 KB, 54 views)
	PICT1065.jpg (664.1 KB, 62 views)
	PICT1067.jpg (467.1 KB, 49 views)

Most people start nutes at 1/4 strenth and then move up.

__________________

A few things

1 you need ph and ec testing kit so that the nutrient fluid you give them is perfect

2 need to cover the tops of those rockwool cubes, its likely it will cause problems if you don't

3 looks like your doing a good job apart from that