BNCL Producer Grow No.2 Fire OG Kush

**Kushbacca** · 12-30-2011, 05:00 PM

Day 1

I'm back from my first adventure in hydroponics. I certainly learned a lot on my first grow. It's amazing the plants even lived but somehow I pulled 7.5 Oz of dry dispensary quality buds.

I'm a 215 patient on my second grow for personal use. I'm looking forward to working in what I experienced on the first grow to make this one even better!

I have a slightly modified BCNL Producer with 18 rooted Fire OG Kush clones sitting in rockwool cubes and hydroton. I'm using RO water with a little calmag, hygrozyme, Sensi Grow and a dash of RapidStart. PPM is at friendly 150 now.

Below is a few photos of my rig, the extra air that I've added and the clones in their new home.

This thread is alway open for comments and advice.

photo4.jpg photo3.jpg photo2.jpg photo1.jpg

**dakinexcom** · 01-03-2012, 08:17 PM

Your setup is supa clean!

Any more add on's besides the air-pumps(fans, venting with inline etc, etc)?

**Kushbacca** · 01-05-2012, 11:37 AM

Day 9

Temp: 68º f
Humidity: 37%

I found powdery mildew on about a third of the plants. Pretty bummed. I chopped a few leaves last night and sprayed them with a solution of 3/4 RO water and 1/4 milk. I'll buy something more serious on the weekend. With that said the growth so far has been good. I even have some roots poking out the bottom already.

leaf.jpg

**Kushbacca** · 01-05-2012, 11:44 AM

Originally Posted by dakinexcom

Your setup is supa clean!

Any more add on's besides the air-pumps(fans, venting with inline etc, etc)?

I have a temp gauge but that's about it. The Producer has most of the big items figured out. It just runs a little hot and the air stones kinda suck. Overall it's pretty handy.

**datpifed** · 01-05-2012, 11:51 AM

nice tread ! hope every thing turns out ok with that powdery mold :/
but im deff subbed !

**Kushbacca** · 01-08-2012, 06:19 PM

Day 12

I flipped the water today with 15 gallons of RO. PPMs are at 300. The milk/water solution is seeming to keep the mold issue at bay. It leaves a little residue on the leaves which doesn't look so great but that's better than dead plants. I think I'll go one more week of veg and then flip them into flower.

plants_01.jpg plants_02.jpg

**goDsnataS** · 01-10-2012, 04:48 AM

My producer has the intake on the bottom left, exhaust top right. What I did is connect the two with ducting to provide circulation and cut two new holes in the opposite corners. To the new top left hole I attached a 4" vortex to push through a 4x12 phresh filter. Although a little louder, this setup actually keeps my box a degree or two below room temp and humidity at around 50%.

**Kushbacca** · 01-10-2012, 01:54 PM

Originally Posted by goDsnataS

My producer has the intake on the bottom left, exhaust top right. What I did is connect the two with ducting to provide circulation and cut two new holes in the opposite corners. To the new top left hole I attached a 4" vortex to push through a 4x12 phresh filter. Although a little louder, this setup actually keeps my box a degree or two below room temp and humidity at around 50%.

Great tip!

**Kushbacca** · 01-13-2012, 06:20 PM

Day 17

About done with veg. I'll flip the water this weekend and turn on the 2 400 watt bulbs.

P.S. That's milk all over the leaves.

almost_vegged.jpg