My attempt at building a homebrew ATOMIX Air Atomized Aeroponic System
~True High Pressure/AA Aero~ http://www.rollitup.org/aerogardener...-atomized.html
Sorry if that sounded cocky... I had just woke up and thought I was being funny...![]()
My attempt at building a homebrew ATOMIX Air Atomized Aeroponic System
~True High Pressure/AA Aero~ http://www.rollitup.org/aerogardener...-atomized.html
so after talking to a DG rep I asked him about there other formulas like orchid pro and all pro and for med MJ he said use gro, foliage pro, bloom, protekt, kln and mag pro, for best results and he also said my yellowing could be from mixing bloom with grow or foliage pro its a common thing that has been happening when people do so and he doesnt know why but he said stick with either gro or bloom as a stand alone and around week 3- 5 go straight to bloom from there on out
Interesting, I don't understand how mixing them would be bad. If you want to follow his advice, then go back to the grow only until the yellowing is under control. Of course as I mentioned in PM- if it's just a leaf here and there it's normal. Homebrewer will tell you himself that the overall look of the plant is the way to gauge it (not a leaf here and there) which I also believe is good advice and agree fully.
My attempt at building a homebrew ATOMIX Air Atomized Aeroponic System
~True High Pressure/AA Aero~ http://www.rollitup.org/aerogardener...-atomized.html
yea I totally agree I Just thought it was weird that the plant was green while using grow only then when i mixed in 1/4 tsp of bloom it yellowed? but yea for now Im doing just grow on one plant and going to try to go to just bloom on the other the plant that had alot of yellowing will get just grow for now
Mixing them will cause zero issues. In dirt, bloom-only will cause yellowing and I mix 50/50 bloom/ grow in their concentrated forms. This is what I'll feed with when the plants are nice and green and really don't need more 'grow' formula. I consider that 50/50 mix to be my 'booster' in the dirt.
homebrewer,
nice grow. Using a very similar setup, but have been running into some airy bud problems as of late. I do not think it is the strains. My lights have been slowly creeping closer and closer to the canopy. Trying to keep the 600s at 20 inches this grow. Is this to far away? How close do you keep you lights. Mine are 600w hps, non- vented without glass.
MM
2 Chambers: x1 1000w: Alaskan Thunder Fuck (ATF), Super Lemon Haze (SLH), Ogre, Bubba Kush; x2 600w: ATF, SLH
http://www.rollitup.org/grow-journal...ml#post7504843
Bookmarks