Reservoir is at 1200 ppm / 2.4eC; 5.9pH. Looked a little low, so added one gallon of distilled water to top off the rez and bring down the ppms. Air temps have ranged between 70F and 78F. RH is at 60%. Ended up tying down two of the four plants, and I expect to tie down the other two this evening. Supercropped a few of the taller stems....



Tie down on plant #1:



A little cleaner tent:



I think I will take clones this weekend and then slam them into 12/12 a few days after....

__________________
My Grow Log: http://www.rollitup.org/grow-journal...ml#post3249782

DAMN!!! there looking good bro..just went read the whole thread..is there any diffrents in the plants (phoneos)?

Reservoir is at 1100ppm / 2.2 eC; 5.8pH. Added another galloon of tap water. Plants are 9" above the hydroton, and 12" below the light. The growth is getting really thick and difficult to manage. Although most LST guides recommend topping the main growth stem prior to 12/12, I'm going to leave mine whole. I've read you need to do the topping one week prior to 12/12, so I don't have the time.



Side View:

__________________
My Grow Log: http://www.rollitup.org/grow-journal...ml#post3249782

Because they are so young, I don't think I can tell if there are different phenotypes yet. Although #1 is the strongest plant, in my few grows I've noticed that doesn't necessarily mean it will be the best finisher. I will be taking clones from all four plants, and will keep a mother plant of the best one.

Thanks for stopping by!

__________________
My Grow Log: http://www.rollitup.org/grow-journal...ml#post3249782

Make sure you label your clone phenos, I do plants A,B,C,D. Then label your clones the same way, so you can track phenos.... I love the clean tent, think I need to go clean my room.........

__________________
Wonders Medical Grow: Round 2! Wonder Woman, Hash Plant, and Purples: http://www.rollitup.org/grow-journal...round-2-a.html

Subscribed! Got some ak48's going organic grow SOG right now, but been getting real interested in a setup just like yours due to space limitations.

The toothpicks and labels are ready to mark my clones. I think #1 will be the keeper, but you can't tell until harvest. The tent is clean because I just set it up last weekend. It will be looking like a normal grow tent shortly...

__________________
My Grow Log: http://www.rollitup.org/grow-journal...ml#post3249782

I dont like using wood markers, I have had mold issues, and if you write on the wood( you probably wouldn't with a toothpick), foliar sprays will make all the writing disapear. Thats a nice little surprise...........

__________________
Wonders Medical Grow: Round 2! Wonder Woman, Hash Plant, and Purples: http://www.rollitup.org/grow-journal...round-2-a.html

As I am putting the plants in to 12/12, and changing to an HPS bulb, I decided I would try my hand at cloning. I've read that you can easily clone two weeks into the flower cycle, so I figure if they don't take, I can try again in two weeks. Used Shultz's Take Root Cloning powder in peat plugs. Trimmed two branches per plant, then re-cut at a 45 degree angle under water. Scraped some of the outside of the stem and covered in the powder. They are in my greenhouse on top of a heat mat with 2 T-8 40w flouros providing light. Gave them a light misting of water and covered them up:



EDIT: Turned lights out for the first 24 hours. My buddy says this will stop them from immediately twisting towards the light.

I've untied all the plants ahead of flowering, and they've retained their bends:



Got a mix of the "Transition" formula bubbling away in my mixer, and a brand new 600w Solar Max HPS light (95,000 lumens). I've got 3 feet of open space over my light, so I hope that the LST will allow me to keep an even canopy 1 foot beneath the light. Tent temps are 70F - 75F and 55% RH. Res is at 1100ppm 2.2 eC; 5.8pH at 67F. I will update with new light and feed schedule after the transition today.

__________________
My Grow Log: http://www.rollitup.org/grow-journal...ml#post3249782

Some of the nicest bushiest plants. Did you cut the tips of the leaves off when you cloned? couldn't tell from pics, but it didn't say in the decription. Peat Plugs work well.
Than an egg carton? Watchout for mold. DOn't make me out to be a mold nazi, but the humidity dome is a good place for it, wood markers in soil is also good way. I think your cloning technique otherwise is awesome. should be very good. What did you soak the Peat plugs in?
Watering them with Super Thrive or Thrive ALive B-1 is def good........

__________________
Wonders Medical Grow: Round 2! Wonder Woman, Hash Plant, and Purples: http://www.rollitup.org/grow-journal...round-2-a.html