This will be my first true grow journal.

I have been growing off and on since the 1980s, but didn't begin toying with Hydroponics until last fall. I have successfully grown three crops hydroponically. I believe that I have the basics down enough to do a journal that you and I can learn from.

Here are some factoids for my grow:

• I will be growing 'up to' 15 plants this grow (more on this later.)
• I will be using a commercially made, 'Ebb and Grow,' ebb and flow system
• My room is 4'x10' completely papered by Mylar
• I will be using 3 x 1000 watt sodium lamps for flowering
• I will use the LUCAS FORMULA for flowering, but not for the vegetative stage
• I am growing in a half finished basement which gets cold in cool weather
• I am using tap water, last time I checked it, was 23 PPM right out of the tap
• I am a legal Medical grower

Short term do list:

1. Clean up room/equipment from last grow
2. Rebuild room
3. acquire clones

As it sits now, my grow room is a train wreck. I finished my last grow in mid July and haven't done much in the way of cleaning up the mess.

Last night I took the old hydroton from the previous grow and cleaned it out. It still had the roots (half rotten) from last July mixed in it. I carefully pulled out the root mass and banged it against the sides of a five gallon bucket to knock loose the hydroton. As it fell into the bucket, I picked out as much root as could. I then put a screen over the top of the five gallon bucket and put a hose into the hydroton and let it run for about half an hour. Whatever is left of the roots rise to the top and stick to the screen. Doing this gets about 99% of the leftover root bits out of the hydroton.

I put the hydroton back into the grow buckets and let them dry overnight. This morning I filled a five gallon pail with three gallons of water and put 7 tablespoons of 35% H2O2 in. I dipped each bucket this solution 5 or 6 times to kill any virus', mould, or bacteria that are still lurking.

Last crop I grew 12 plants and last night it took me about 3 hours to clean all that hydroton. This will be the second time I've reused this same batch of hydroton.

This morning I started to rebuild the room. It isn't actually a 'rebuild' but I'm extending it. The previous grow room was 8 x 4 feet. I am extending it to 10 x 4 feet. I am also redoing the plastic on the door where I enter the room so that light does not escape when I enter the room.

On the previous grow the controller bucket was in the room with the plants. This time I will have it outside the room so it isn't in the way. The problem I had with the controller in the room with the plants is when they got big, it made it hard to access the timer and I would accidentally bump the timer and screw up the settings without realizing it.

I had planned to begin the actual grow last Monday August 31st, but the dispensary where I get my medical cuttings hired some bozo as a gardener and he killed half of the mothers. He 'forgot' to turn the exhaust fan back on after doing some work in the grow-room. Imagine a room with 200 4 foot tall mother plants, needless to say it had at least 20 1000 watt halides running in it, very hot and a very stupid mistake. This is sad because they had 186 different strains to choose from. I had pre-ordered 11 white widows and four blackberry # 2 cuttings three weeks prior, but because of the idiot wrecking everything they gave them out to needy growers. I called them back two days ago and they took about 1000 cutting from forty different strains on Monday. They believe they will be rooted by next Wednesday and because I had a pre-order, they will still honour it and give me first dibs. They cannot guarantee what strain I get, though. We will see.

In the meantime I have a bit more work to do. Pictures coming soon.

__________________
Lucas Formula - Hydroponic Grow Journal

Hmmmmmm, This is the mess from my last crop.

The reservoir barrel needs a little cleaning, you think?
Thank god for Hydrogen Peroxide!!
I wont be putting the ebb and grow together until I know exactly how many cuttings Im getting. It came with 12 units so I splurged and bought an expansion kit which adds six more buckets.

I will put my new lamp together tonight, with my new parabolic hood. Last crop I had 12 plants with two 1000 watt sodium bulbs and some of the perimeter plants were smaller. 3k watts in 40 ft sq should give the kick I need! 75 watts per square foot..

Attached Images

	P1010528.jpg (83.8 KB, 113 views)
	P1010527.jpg (38.9 KB, 94 views)
	P1010529.jpg (76.2 KB, 113 views)
	P1010530.jpg (65.3 KB, 96 views)

__________________
Lucas Formula - Hydroponic Grow Journal

• I am using tap water, last time I checked it, was 23 PPM right out of the tap

Damn I wish my tap was that clean....my tap is 740 ppm......sucks about the clones....I f n hate cleaning hydroton..............Check in later for more updates

__________________


Be wiser than other people if you can, but do not tell them so.

Wow, 740 ppm. That is just about nuts. Yeah, I hate cleaning hydroton too but I finally got it all done.

__________________
Lucas Formula - Hydroponic Grow Journal

OK, update time. The clones from my medical dispensary finally rooted so I went and picked some up. All the ones they had looked really sad with a few exceptions.

No matter, I was the first in line so I got first pick of the best ones. I got six skunk #11, five AK47 and four Dynamite.

15 total plants in a 5 x 10 room. Should be interesting.

They are very small cuttings BUT they all have nice perky little root systems on them. I will idle them for a week at about 300 ppm, including B1 and some rooting stuff that came with my ebb and grow, "Root 66".

I expect to see a few roots coming out of the bottoms of the pots in a week or ten days, as soon as I see roots on most of them, I will crank the PPM up to 500, then up 100 every day til it is at 800 and leave it there til they are ready to flower.

I am lazy so I am using the Technaflora stuff that came along with the ebb and grow for vegetative. I Dont feel like going out to the grow store for some of the 'Grow' formula. When I start to flower I will switch to the Lucas Formula.

I will take some pictures tonight or tomorrow.

Peace!

__________________
Lucas Formula - Hydroponic Grow Journal

Ok, I have some pictures finally. I have had the cuttings idling at about 250 ppm for the last five days. They are getting some small but new growth on all but one, and they are looking healthier than when I first got them.

I changed out the reservoir yesterday, day four, and they seem to like it. I pulled back some of the hydroton on a few plants and I can see that the roots are spreading nicely out of the rockwool. I might start cranking up the nutes a little earlier than I was expecting to. Maybe in a couple of days. Good news for me given I started everything two weeks later than planned.

I am flooding twice a day, once when the light goes on and once 12 hours later. The lights are on an 18/6 schedule right now.

PPM: 250
PH: 5.7
Room temp: 78F
Water temp: 68

I have all 15 plants under a 1000 watt MH. I am going to wire up for the third lamp next week, too lazy to do it this week. What can I say

There will be 3k of HPS. Two of the HPS have the best bulb that the hydro store sells, and the third one has a cheap assed sylvania bulb. I am saving up for another good HPS bulb but the cheap one will work until then. I have a nice new parabolic reflector for my newest lamp. I also put up fresh mylar on the walls.

For this grow there will be looooots of light!!

Attached Images

	P1010531.jpg (43.6 KB, 90 views)
	P1010536.jpg (98.9 KB, 139 views)
	P1010537.jpg (86.9 KB, 115 views)
	P1010541.jpg (58.6 KB, 101 views)

__________________
Lucas Formula - Hydroponic Grow Journal

The PH has been climbing obscenely fast the last few days, going from 5.5 to 6.5 in 24 hours. I started checking every six hours or so knocking it back down.

I added some hydrogen peroxide yesterday and this morning when I checked the vitals, the PH had settled down and was at 5.6. Must have had some sort of pathogen or fungus in the system. Added more H2O2 this morning, I will check it again tonight. I will add a tablespoon every day until I change out the solution next weekend. That should kill whatever the hell was driving the PH up.

__________________
Lucas Formula - Hydroponic Grow Journal

My PH has stabilized. I lifted a few of my pots up and low and behold, roots coming from every one I checked:

Time to crank up the nutes.

I cranked them to about 550

PPM: 550
PH: 5.7
Room Temp: 74
Water Temp: 68

I expect them to take off within the next couple days

Once they take off I will start notching the PPM up until it is at 800 PPM then keep it there

Woohoo, exactly one week from retards to roots

Questions?? Comments??

__________________
Lucas Formula - Hydroponic Grow Journal

what do you think you will yield??