Hey guys i've just started browsing the forums and thought i'de go ahead and post up my grow. Right now i'm growing White Widow for the 3rd straight time using the SOG method. My cabinet is 24"Wx15"Dx70"H, not a very big cabinet but it does get the job done.

I have averaged about 3-4 ounces per harvest with 4 plants in 7L pots. I'm currently testing to see how I could do with 16oz cups to see how much I can get as well. Now to be fair I wasn't going to do this but I thought 2 of the 3 i'm testing were gonna be male so I was going to toss them but when I found out they were female I said screw it and left them in there starting cups.. but cut out the bottom half of the cup and put in some more dirt at the bottom of another cup and put it back in.. not a real transplant but hey i got space issues (1L pots would be ideal tho).

Ok the big girls are currently about 6.5ish weeks into flower and the little ones I would say about 4-5.. they were stressed pretty bad, especially one of them (was out of the cab for almost a week). I feed with PBP bloom for soil and some cal-mag nutes for flower and tend to use fish fertz for veg.

Below are pictures of my babies, as you can see in that last pic she's a tri-node.. kinda skinny compared to the others but still cool lookin none the less. Well, tell me what you guys think.

Attached Images

	cabinet open.jpg (68.6 KB, 995 views)
	marijuana graph.jpg (117.6 KB, 678 views)
	backleft1.jpg (95.1 KB, 383 views)
	backright2.jpg (123.2 KB, 346 views)
	DSCN0156.jpg (88.8 KB, 403 views)
	tri-node 2.jpg (72.1 KB, 309 views)

bad ass set up dude, looks nice. nice fan also. plants look bomb! nice work

__________________
Anarchy is our only slight Glimmer of hope.

Thanks, I plan on halfing the cabinet soon and putting a mom/clone chamber on top and flower chamber on bottom. It would be nice to have a perpetual harvest every 2 months of 3 ounces, but thats low.. I can pry get up to 4-5 if done right.

The next strain I wanna do is C99xA11, I hope that one will fit in my cab nicely and not be too stretchy. I think i'm going to try and reveg my smallest Widow plant and keep her for cloning too, and in the mean time grow out the C99xA11.. make seeds and keep a mother as well. Still trying to figure out how I wanna do it.

if i wanted grow in my closet how would i set that up

Well i've never really grown in a closet before, mainly just cabinets.. but the idea is the same. Need a light and ventilation.. then u go from there.

__________________
http://www.rollitup.org/grow-journal...-o-g-250w.html

can u help and explain to me how to set up in a cabinet?

i read that having 3 leave sat each joint is a mutation and that plants will be smaller and weaker. personally i wouldnt use it as a clone mother but test it out and let me know how it is i will be watching

__________________

Well, first off get a cabinet sufficient for you. My room has a knook where my cabinet fits perfectly, and if I wanted too i'm sure I could even put it in my closet if I needed a bit more stealthier of a grow. Also if you get a taller cabinet like mine I suggest getting a piece of plywood to put on the back for more stability.

My cabinets grow space is 2.5 square feet (24"x15"), so I have a 250w light. I would suggest getting a HPS/MH light but I do know for me temps have been a huge issue, I didn't even grow for 2 months in the summer so I wouldn't have to deal with it.. I live up north so we don't have AC. My problem has always been that my room itself gets too hot so my cabinet then gets hot even with good ventilation, I currently average about 81-85 degrees during the light cycle (topped out up to 100 before I got it under control). So you're lighting is up to you, a lot of people tend to go with CFL's for cabinet's but I could never ditch HID lighting for flowering.

Now after you have your cabinet and light you will need a good ventilation system. What I have done is drilled 4-5 1" holes at the bottom of my cab for intake and I have a Vortex 4" inline duct fan that with a 172 CFM rating. Now with hindsight I would probably get a smaller fan because I bought a fan controller for it just so I could turn it down to half power.. was a lot more powerful then i anticipated.

After that you will need your standard grow supplies such as pots, soil, fertilizers, seeds, etc. Not sure how much you've already read so i'll just stop there. I plan on doing a new thread with my new grow after this one is done so I can do a more step by step grow from beginning to end..

__________________
http://www.rollitup.org/grow-journal...-o-g-250w.html

i would like to have the same set up as urs can u help me!!! cause i will to be growing the white widow.

Well I would have to agree.. she is really cool lookin but other then that I dunno. My other 2 are soooo much fatter then her so i'm sure I won't keep her as a mother. I'm still kinda wondering if i'll even keep one of them for a mother, still got plenty of seeds if I want one.

__________________
http://www.rollitup.org/grow-journal...-o-g-250w.html