Initiating Root Stress Late in Flower

legallyflying

Well-Known Member
I have read from several sources that drying or moisture stress in the root zone can induce the increased production of resin to decrease evaporative moisture loss theough the leaves.

Before people start saying that "just leave it alone to maximize its potential" I think you should realize that as growers, most of us are no interested in reaching a plants NATURAL maximum potential. Natural selection and plant response mechanisms obviously favor maximum seed production, not flowers with specific qualities. You can steer a plant to produce results you desire. Look at grape and berry growers that cut their plants to the ground every year...is that "natural"?

Anyways, I am in DWC and was thinking that I would drain the water put of the buckets for maybe 2-3..5? Hours a day to induce moisture stress. Has anyone ever tried this? Or other moisture limiting effects?

The source of this steerage theory was reading in maximum yield, urban Gardner, and the association of greenhouse growers publication (can't remember the name)

Thanks
 

billy4479

Moderator
Dr. Lynette Morgan offers her tips for balancing vegetative and generative growth through crop steering.

Growth balance is something many indoor growers may not be tuned into—after all, plants are programmed to grow leaves, flowers and fruit with little input from us. However, some of the tools used by the commercial greenhouse producers of fruiting crops can be applied on a smaller scale, and crop steering is a useful technique to know and understand. Crop steering works on the principle that there are two different types of growth with flowering and fruiting plants: the vegetative phase, which refers to foliage and stem growth, and the generative phase, where flowers form and fruit begin to set and develop. Balanced growth means the plant produces just enough foliage to support a good number of developing flowers and fruit, thus maximizing yield without putting a lot of extra energy into unnecessary amounts of foliage.
What is vegetative growth?

We often hear about plants that might have gone overly vegetative—a common occurrence under lush hydroponic growing conditions with plenty of water and nutrients. Overly vegetative crops are fairly easy to recognize. With plants such as tomatoes, the stems are often very thick—sometimes described as being like tree trunks—and the foliage is lush and light green with large leaves. Overly vegetative growth means the plant doesn't have a lot of developing flowers or fruit, and is instead sending most of the assimilate produced via photosynthesis into further leaf growth. Any flowers that develop may be small and weak and may even abscise, as leaf growth is favored over generative growth in this condition. The canopy of an overly vegetative crop often appears very dense, with many long leaves, and will present fast growth and rapidly increasing plant height, but few mature fruit and sparse flowering.
"Flowering and fruiting crops large and small will give optimal yields if the vegetative/generative balance is correct."


Strong vegetative growth is common in young plants, which naturally favor a high degree of foliage development. However, certain other conditions also favor vegetative growth, and this sort of development is common with plants growing under mild conditions where there is little or no plant stress. Using substrates that retain a lot of moisture—such as fine grade coconut fiber—and running lower-nutrient EC levels also encourages vegetative growth, as do reduced light levels, high humidity and plenty of water from small frequent irrigations, especially with young plants or those grafted on vigorous root stocks.
What is generative growth?

A plant that has become overly generative is one where the assimilate being produced is largely being directed to the developing flowers and fruit at the expense of further leaf development. An overly generative plant may also have yields restricted due to a lack of foliage development, which is required to provide the assimilate required for flower and fruit development. In tomatoes, this is often described as thin growth, with leaves being small and sparse and petering out at the tops. The plant stem becomes thinner, as opposed to the tree trunk-like stem diameter of plants, which are overly vegetative, and sometimes the flower clusters are short and bent in a downwards direction. Usually generative plants have a high number of flowers or fruit, which attract the bulk of the assimilates produced by the leaves. While a highly generative plant may seem like a good idea in order to maximize yields, in reality this sort of lack of balance means there is insufficient foliage to support the number of flowers and fruit which form, and in many crops this will mean smaller fruit size and reduced yields.
Factors that favor generative development include older plants with heavy crop loading, growing in warm conditions with high light levels, CO2 enrichment and low humidity or VPD. Freely draining growing media and restricted moisture, higher EC and harsh growing conditions caused by light and heat also tend to encourage generative development.
Getting the balance right

Experienced growers will soon learn to tell if a crop is looking a little too vegetative—often before flowering begins—and can implement some measures to keep things on track. With tomato crops there are some basic measurements that can be used to determine the vegetative-versus-generative balance. A tomato plant with a balanced growth habit tends to have a stem thickness of approximately one third of an inch in diameter at six inches below the growing point. A much larger diameter indicates the plant is heading in a vegetative direction, and a much thinner stem means the plant is going generative. A number of plants should be measured and the average reading taken, as there is always some natural variation between plants in a crop.
Steering the plants in the right direction

Fortunately, there are many tools and techniques that can be used with a protected-environment hydroponic crop where the grower has control over all growth factors. Tomatoes and capsicum have the best selection of cultivars that have been bred for vegetative or generative or even balanced growth habits, and it's worth selecting these for certain growing conditions. In indoor gardens many tomato and capsicum plants respond to the highly protected environment by going more vegetative, so selecting cultivars with a generative growth habit often helps in obtaining better yields. Tomatoes grown in a summer glasshouse with high levels of natural light and a heat stress are better selected from the more vegetative cultivars in order to give a better balance of growth under the harsher growing conditions. Cultivar alone, however, is usually not enough to guarantee a good growth balance, and some degree of growth manipulation is often required for many indoor plants.
Steering with temperatures, light, humidity and CO2

As a general rule, lower light or shading favors vegetative growth and high light intensity favors generative growth. High humidity favors vegetative growth, low humidity favors generative growth. CO2 enrichment favors generative growth once flowering or fruit set has occurred as it allows greater production of assimilate from the same leaf area. Most growers understand these basic concepts and their effects on growth balance, although a more advanced tool is available in the use of day/night temperature differentials (DIFs), which can be used to steer a crop back into more balanced growth. DIFs work well in indoor gardens where the grower has good control over temperatures, and they are also used to promote the transportation of assimilates from the leaves into the fruit. High day temperatures tend to promote stretching and elongation of the plant, as well as an increase in leaf area. Night temperatures do not play a role in this particular relationship, but the difference between day and night temperatures is important to flowering and fruit development. Environmental conditions also play a role—low light levels and warm temperatures promote stem elongation and a tall weak plant, so the temperature should be kept cool and matched to the light levels. A low DIF (where night and day temperatures are similar) is used to stimulate vegetative growth, while a greater DIF (where night temperature is much lower than the day temperature) results in more generative growth. This means it's often a good idea to impose day and night temperatures, which are fairly close to each other early in the plant's life to stimulate good foliage growth, then switch to a greater DIF with much lower night temperatures as the plant comes close to flowering and fruit set. From then onwards, tomato and capsicum growers may change the DIF settings to push either vegetative or generative growth as required.
Steering with EC and moisture levels

Along with temperature DIFs, conditions in the root zone act to steer plants towards more vegetative or generative growth to help maintain balance. Growing substrates with a high water-holding capacity—such as fine-grade coconut fiber, peat and vermiculite—tend to favor vegetative growth, while those with a much freer draining nature, such as coarse perlite, encourage more generative growth, although irrigation management also plays a large role in root-zone moisture levels.
A high moisture content in the growing media created with the use of frequent irrigation and a relatively low EC of the nutrient solution will promote water uptake by the plant and encourage vegetative growth. Applying controlled plant stress with the use of higher EC or deficit irrigation practices will have a more generative effect. Deficit irrigation may include reducing the volume applied at each irrigation, allowing more time between irrigations and allowing the media to dry slightly overnight by restricting early morning and evening irrigations. This type of deficit irrigation and the use of high EC to force plants into generative growth must be used with caution, however, as moisture fluctuations in the root zone can lead to an increase in fruit splitting and cracking, and are also associated with an increase in blossom end rot development in tomatoes and peppers under certain growing conditions.
Sizing up tomato fruit

The warm parts of tomato plants (growing points, fruit, leaves) attract more assimilate than colder parts do. A small difference in temperature can make a considerable difference to the distribution of assimilate within the plant—thus warm fruits attract more sugars for growth than those that are cooler. A good technique used by growers to boost fruit growth and size is the pre-night drop. This process involves allowing the plants to receive increased warmth in the late afternoon. This heat is then absorbed by the fruit tissue, while sugars accumulate in the photosynthesizing leaf tissue. During the evening the temperature is then dropped back quickly by several degrees. The drop in temperature causes the thinner mass of the leaves at the top of the plant to cool quickly, while the fruit, having a much larger mass, remains warm for longer. The cooled leaves then unload their assimilate sugars to the warmer fruit tissue, forcing more sugars for growth out of the foliage and into the fruit. Overall, the 24 hour temperature average is not affected by this process, so it does not affect plant internode length or stem diameter. The rate of assimilate importation into the developing fruit determines fruit size and the amount of assimilate that is sent into the fruit is highly dependent on the temperature of the fruit tissue—the warmer the fruit tissue, the more sugars are imported into the fruit. The optimal fruit temperature for sugar importation is between 73o and 77oF. As an example, the pre-night temperature drop might be from a late -afternoon warming of up to a maximum of 77oF, followed by a drop of three to four hours at 60o to 62oF in the evening. From then onwards normal night temperatures are run. This technique works best in indoor gardens that have good temperature control, and is highly effective provided it is carried out correctly—some growers use infrared thermometers and internal fruit sensors to check leaf and fruit temperatures when they first attempt this process, to ensure that there is a sufficient temperature difference between the leaves in the head and the warmer fruit below.
Plant steering with peppers and crop unloading

Peppers tend to grow in flushes, with periods of leaf growth alternating with periods of fruit growth. This usually results in fruit being harvested in flushes during the first few months of the crop, which is a normal growth cycle, but not one that is favored by growers wanting a regular supply of fruit. Usually, after the second flush of fruit is harvested, pepper plants will then resume a more balanced state of growth, with a consistent pattern of vegetative and generative growth. There is little that can be done about this natural cycle of vegetative and fruit growth in peppers, but if the halt to vegetative growth goes on for too long, yields can be reduced and future harvests delayed. One effective method of forcing both pepper and tomato plants into unloading some fruit so that vegetative growth can be speeded up is to increase the temperature. Another method is to harvest some fruit before they are completely ripe, which may mean harvesting fruit from young pepper plants when mature green rather than waiting
for the first signs of coloration.
Summary

To direct plants into a more vegetative growth habit:
Shade crop or reduce light (but not so low as to severely restrict photosynthesis); apply frequent irrigations; allow less dry-down of the root zone overnight; use moisture-retentive fine-grade growing media; lower EC; increase humidity; reduce day temperature; use a low DIF (similar day/night temperatures).
To direct plants into a more generative growth habit:
Apply a little stress—increase EC, restrict moisture in the root zone, allow media to dry slightly more overnight. Increase light levels and temperature, increase CO2, drop back humidity. Use a freer-draining media or more careful control over irrigation, drop back irrigation frequency and amount. Use a greater DIF (night temperatures much lower than day temperatures). For sizing up fruit, use pre-night temperature drop method to force assimilate out of leaves and into developing fruits.
 

criss786

Member
Plant that has become overly generative is one where the assimilate being produced is largely being directed to the developing flowers and fruit at the expense of further leaf development. An overly generative plant may also have yields restricted due to a lack of foliage development,"Get a LIVESTONED wristband for your buds. "Down for the cause!" http://www.livestoned.org "
 

Brick Top

New Member
That sounds good for things like fruit trees and tomatoes and the like because it means increased fruit production.

But what is the fruit of a cannabis plant? Trichomes? Nope. Buds/flower tops/colas? Nope. Seeds? YES!

The singular purpose for the existence of cannabis plants is to perpetuate the species by making seeds.

Regardless of being grown inside, be it in soil or hydro or aero or whatever, cannabis plants evolved outdoors, in the wild, and their survival mechanisms are based on that and their singular goal, their one and only reason to exist is to make seeds to perpetuate the species.

As anyone who has grown for a while know plants store sugars/carbohydrates (mobile nutrients). The reason cannabis plants evolved to do that is late in the growing season conditions can become harsh. Anything from reduced amounts of moisture to drought conditions, nutritionally depleted soil, extreme temperatures where cold temperatures will inhibit, or stop, plants from being capable of taking in certain nutrients.

If a female cannabis plant is not fertilized by late in the season and one or more of the 'triggers' of poor conditions kick in the natural reaction of a cannabis plant is to rely mainly on stored nutrients and to put them to use to finish making the seeds already in the progress of being made or to begin making seeds, which means turning hermie.

They will go into panic mode, they will do the last ditch effort thing to produce their fruit, which is seeds. Female cannabis plants fruit is not unfertilized ovum in each calyx or the calyx itself, the calyx that each one is a small individual female cannabis plant flower that grows together in clusters and forms buds or tops or flower tops or colas or anything else we call them. The fruit of a female cannabis plant is seeds.

Since we want seedless herb would it make any sense whatsoever to do anything that would stimulate and enhance the production of female cannabis plant fruit, that being seeds?

If anything a grower should want to maintain a growing environment that will not set off any of the 'triggers' that will tell female cannabis plants that they have to maximize their efforts to produce what is their fruit, which again, is seeds.
 

legallyflying

Well-Known Member
Hmmm, I don't know if I am going to agree with you there bricktop, which doesn't happen all that much. The goal of EVERY plant, just like tomatoes and fruit trees is to produce seeds. The fruits are only there to help the seeds become established or too aid in dispersal in particular species.

I see your point, indeed seeds are the ultimate goal...OF THE PLANT. But, in our case, we have separate goals. Indeed plants simply react to environmental cues, weather that is the conservation of moisture or the utilization of carbohydrates for seed production. However, it has been documented that certain growing parameters (temperature, humidity, root moisture) CAN be important tools for the medical grower. It has been well documented that arid conditions will cause an increase in the development of leaf surface resin amounts in an effort to increase the boundary layer of the leaf, reduce evapotranspiration and ultimately, conserve moisture... yes, in the plants case, to ensure that it lives long enough for the seeds to mature. While not every horticulture paper is indeed relevant to growing great bud, I'm trying to get to the bottom of this steering method.

I just recall someone saying that moisture stress in the root zone can also cause effects that are beneficial to the grower such as higher brix or the production of essential oils. Marijuana culture is riff with all kinds of vodoo and what not and maybe letting the roots dry out a bit is nonsense, there are certainly those that continue nonsense techniques (cough...excessive flushing...cough) but one thing is certain, it has been hard to get info on this one.
 

Brick Top

New Member
Hmmm, I don't know if I am going to agree with you there bricktop, which doesn't happen all that much. The goal of EVERY plant, just like tomatoes and fruit trees is to produce seeds. The fruits are only there to help the seeds become established or too aid in dispersal in particular species.

I see your point, indeed seeds are the ultimate goal...OF THE PLANT.

The point is that every plant function other than the production of seeds will become vastly less important and not be allocated all that would otherwise be allocated to them and other functions will suffer, be reduced, due to it. Every plant function not vital to the making of seeds will be a very distant second in importance.

The first, and primary reaction, would be to turn hermie so pollen can be created so there can be pollination. Next the plants will devote all they have to growing and finishing those seeds before dying.

A plant won't react by creating more trichomes or increasing resin production or cannabinoid/ terpenoid production. Those things are superfluous to the making of seeds.

Cannabis plants are Dioecious plants, they have male (staminate) flowers on one plant and female (pistillate) flowers on another plant.

Monoecious plants have separate male and female flowers on the same plant, but at times require being pollinated by a male flower from a different plant.

The types of plants the information you provided are monoecious plants, plants that are already making their fruits or vegetables and what was said was a way to get more out of them, to get them to increase production they are already in progress of doing or will soon be doing.

They're different than how we grow cannabis plants since we do not want the cannabis fruit/seed. If we were intentionally growing seedy pot and we wanted increased numbers of seeds what was posted might likely work, it might do the trick.

But what was posted was not a way to increase bud production or trichome production on unfertilized cannabis plants. If already fertilized and in the process of making seeds it could be possible that to protect the plant, and seeds, so it could live long enough to make fully viable seeds some, or all, of what you said might occur. Maybe.

But since they are unfertilized and also different types of plants than the fruit and vegetable types used as examples the results would not be the same. There would be a very different reaction, one of triggering a last ditch effort to produce seeds not already in the act of being produced by turning hermaphrodite.

The process is to increase fruit production. For a female cannabis plant that is not pollinated to make fruit (it's seeds) what does it need to do first? Become pollinated. If in a group of all females how does that happen? One, some or all need to turn.

The process would force or pressure a female cannabis plant that has not been pollinated to attempt to do something it has not started to do yet. It would not 'decide' to redirect the stimulus to other functions, functions we would like, like more calyxes equaling larger buds and more trichomes per inch or centimeter or whatever or increased resin production or increased amounts of cannabinoids and or terpenoids.

None of those things would be what the stimulus would be telling the plant to do, it would not release hormones, or increased amounts of hormones to perform those functions. Instead it would release hormones to turn the plant and to begin to create male sex organs to create pollen so it could then pollinate itself and produce seeds.

 

legallyflying

Well-Known Member
I see the logic of what your saying but I guess I have a hard time swallowing that every stress realized by the plant will have an equal response, and that would be to induce hermaphroditic flowers. If the impulse for herms were that strong, I think that we would see a whole lot more people with hermaphroditic plants. In my reading, it really comes down to individual strains, some are more prone to hermie than others, its simply a matter of genetics. In the end, I have come to understand that it ultimately comes down to the degree of stress and the genetics of that strain.

In any case, I am talking about these manipulations in the latter 2-3 weeks anyways. Even if the plant did go hermie on me, the pollen would not have time to mature and ultimately cause the formation of seeds.
 

frogster

Active Member
if you want to possibly maximize tric production germinate a tiny,tiny section of your plant (last few weeks of flowering).. very carefully&dont want to fuck up your entire grow or plant .. the plant will realize its pollinated and start pushing out more trics to protect its babies ( all over the plant) .. possibly using a lower popcorn area ,, and keeping it in a bag,,, who cares if it dies,,, it sent the signal to the plant already.. yes? no? never tried .. just a secret
 

frogster

Active Member
btw, where the link for your newest grow? never mind,, found it,,, looks like you downsized your area,, but increased other things,,, interesting.. messy garage..lol
 

billy4479

Moderator
Yeah... that big copy paste up there is completely irrelevant to cannabis.
Cannabis is a compound fruit dumbass instead of one flower and one fruit like a pepper or tomato it produces 100's of small flowers and fruits ....you guys should do some home work befor you talk about shit you dont understand....you think that cannabis wont respond to the same treatment that works on 100's of other plants your retarded ...
 

Afka

Active Member
Oh really, so what should I do differently on an indeterminate cannabis plant, versus a determinate one?

How about summer vs fall strawberryannabis plants?

Would a bell pepperannabis plant be bipar cymed, should I remove suckers until first inflorescence then let should i leave one or two leaders after that?


Fucking moron those plants are completely different in growth patterns, response to photoperiod, physiology and inflorescence than cannabis.

Go learn to back up what you THINK you're talking about


edit: Did you notice that article said to lower light duration to increase vegetative growth patterns? Yeah. I bet you did. Oh and cannabis doesen't make fruit, just seeds. Nor the ovary, nor the receptacle undergo any changes, in fact the flower simply sits there on the seed. Not fruit, seed.
 

pooper

Well-Known Member
That sounds good for things like fruit trees and tomatoes and the like because it means increased fruit production.

But what is the fruit of a cannabis plant? Trichomes? Nope. Buds/flower tops/colas? Nope. Seeds? YES!

The singular purpose for the existence of cannabis plants is to perpetuate the species by making seeds.

Regardless of being grown inside, be it in soil or hydro or aero or whatever, cannabis plants evolved outdoors, in the wild, and their survival mechanisms are based on that and their singular goal, their one and only reason to exist is to make seeds to perpetuate the species.

As anyone who has grown for a while know plants store sugars/carbohydrates (mobile nutrients). The reason cannabis plants evolved to do that is late in the growing season conditions can become harsh. Anything from reduced amounts of moisture to drought conditions, nutritionally depleted soil, extreme temperatures where cold temperatures will inhibit, or stop, plants from being capable of taking in certain nutrients.

If a female cannabis plant is not fertilized by late in the season and one or more of the 'triggers' of poor conditions kick in the natural reaction of a cannabis plant is to rely mainly on stored nutrients and to put them to use to finish making the seeds already in the progress of being made or to begin making seeds, which means turning hermie.

They will go into panic mode, they will do the last ditch effort thing to produce their fruit, which is seeds. Female cannabis plants fruit is not unfertilized ovum in each calyx or the calyx itself, the calyx that each one is a small individual female cannabis plant flower that grows together in clusters and forms buds or tops or flower tops or colas or anything else we call them. The fruit of a female cannabis plant is seeds.

Since we want seedless herb would it make any sense whatsoever to do anything that would stimulate and enhance the production of female cannabis plant fruit, that being seeds?

If anything a grower should want to maintain a growing environment that will not set off any of the 'triggers' that will tell female cannabis plants that they have to maximize their efforts to produce what is their fruit, which again, is seeds.
well said my good man.
 

frogster

Active Member
WTF ... What if C.A.T really means DOG... need to read this shit sober I guess..... when will that be? Bricktops the man..
 

Onlygrams

New Member
I wonder if anybody on this thread has a different oppinion now that crop steering is a scientifically recognized practice ( that alot of large grows use i.e. jungle boyz , stizzy ext. with real world proof )that uses stress to get more bud and tric production or if certain people still feel that stress will only make herms And with that being said to the original question i was wondering the same thing about generative growth in dwc. I wonder if crop steering in dwc is possible and how would it be achieved.
*Genuine question - no hostility - no need to get mad and rant if you dont want to answer
 

GrodanLightfoot

Well-Known Member
Mass flow ruins quality. Why? Because cannabis primarily soaks up calcium as soon as it transpires. And calcium kills sulfur, potassium, magnesium, boron, iron, nitrogen etc etc.


To harvest quality Cannabis, you must stop mass flow transpiration prior to stopping photosynthesis. We don't need fancy terms to understand what's happening. When you put limestone and vinegar in a bottle, the acids are neutralized. The goal of growing Cannabis is to produce acids,not neutralize them.
 
Top