making hash oil on a large scale

SOorganic

Well-Known Member
Hey all its been a while. I got my hands on a stupid amount of trim and i want to turn it in to oil. I know how to make oil but was wondering if any body had any suggestions as how to process a large amount efficiently. Any suggestions are more than welcome and thank you all for your time!
 

Unnk

Well-Known Member
i blasted about close to 45 grams of bho before took all day but damn was it efficient
 

SOorganic

Well-Known Member
Got my hands on 10 pounds of "sugar leaf" and with an avg of a 10% return rate thats a pound of oil ima get. I think the real question is, what the hell do i do with a pound of hash oil?
 

SOorganic

Well-Known Member
Im just afraid to think about how much money its gonna cost for all the damn butane ima have to buy. Straight clean out OSH and Homedepot! LOL
 

Unnk

Well-Known Member
i suggest using 1inch and 1/2 copper pipe around 3 feet long its what i used i was able to put 2 cans of butane per through you may want to use a LARGE collection disk asthe 45 gram puck i got was plate sized and you can make concentrates and such i suggest doing like 2 pound runs a day and that way youll have done in 5 days

i got my 45 from qp of some fine buds that got alittle moldy during the curing so i heated via the oven for awhile kill the spores i then proceded to powder it all and blasted it

the hash i got was nice and blonde
 

sixteenounces

Well-Known Member
I would go for the ISO method... you should be able to find 91 - 99% in larger bottles cheaper than butane.. and it would be far less dangerous for large quantity...

I would get 8x12 pyrex pans.. and a planer blade... should be able to do 10 pounds with like 1 - 2 gallons of iso, and like 5 - 10 pyrex baking pans

plus iso hash oil is soo much better imo
 

azryda420

Active Member
I would go for the ISO method... you should be able to find 91 - 99% in larger bottles cheaper than butane.. and it would be far less dangerous for large quantity...
ISO has is the WORST product ever! lol

You are a complete idiot if you think ISO is better than BHO. Let alone he would have to have soooo much freaking rubbing alcohol. and all the dishes to evaporate it. Butane evaporates much faster and there won't be any clorophyll in it. Yes butane is costly and a lot of cans, but still better. With ten pounds of trim, he's be shaking jars and shit all day. Fuck that. Blast that shit.

ISO is stoopid if you ask me.

ISO oil taste like straight ass dude.

Take notice that ZERO cannabis clubs sell ISO product. And they NEVER have. They WOULD sell BHO but the feds don't like people blowing there sheds up.

ISO OIL = WORST HASH PRODUCT EVER!
 

sixteenounces

Well-Known Member
ISO has is the WORST product ever! lol

You are a complete idiot if you think ISO is better than BHO. Let alone he would have to have soooo much freaking rubbing alcohol. and all the dishes to evaporate it. Butane evaporates much faster and there won't be any clorophyll in it. Yes butane is costly and a lot of cans, but still better. With ten pounds of trim, he's be shaking jars and shit all day. Fuck that. Blast that shit.

ISO is stoopid if you ask me.

ISO oil taste like straight ass dude.

Take notice that ZERO cannabis clubs sell ISO product. And they NEVER have. They WOULD sell BHO but the feds don't like people blowing there sheds up.

ISO OIL = WORST HASH PRODUCT EVER!
You are either:

1. A teenager
2. A cali trendster
3. Someone who has never tried a multitude of different extracts, tinctures, and hash's

The ISO method is the best method overall when done correctly, period – meaning not only do you get more hash than with the other methods, but the end result is usually of a higher quality as well… meaning it tastes better, burns cleaner and is more potent overall. The reason for this, is high percentage iso alcohol will completely evaporate, with no heating (witch breaks down THC). ISO alcohol is also obviously, Alcohol based, apposed to butane, witch is oil based. This will leave the trich's you are removing "More complete". Butane breaks down the trich's and oils inside of them. because like butane, The resin glands you are removing are oil based. I could go on to list a million other reasons that ISO in my opinion is better, but i will stop here, with just the quality value, and not mention the production value of ISO.

I just suggest the OP to do alot of research first. It is not hard to make the ISO, in bulk AND quality. You can shake up a 5 gallon with a lid, and run it threw some micron screen from lowes or home depot, and be done with it in like 15 - 20 mins.
 

SOorganic

Well-Known Member
I would go for the ISO method... you should be able to find 91 - 99% in larger bottles cheaper than butane.. and it would be far less dangerous for large quantity...

I would get 8x12 pyrex pans.. and a planer blade... should be able to do 10 pounds with like 1 - 2 gallons of iso, and like 5 - 10 pyrex baking pans

plus iso hash oil is soo much better imo
Iv done the iso method b4 and it was aight. I prefer bho because i think it has a cleaner taste. But yes i agree the iso method is much easier, but i dont have a container to mix the trim and the iso that would be big enough. On a side note, does using copper really make that big a difference in the end? Iv always used pvc and its been fine.
 

MrEDuck

Well-Known Member
SOorganic don't use PVC to run BHO over time the butane leeches stuff out of the PVC. And the amount of butane you'll need for ten pounds of trim would definitely pull shit out. You can get cases of butane online for way cheaper than in stores. For that amount you might want to use something like pentane or hexane because they're liquids not gasses.
 

Unnk

Well-Known Member
bho over iso any day iso = nasty tasting nasty product id hexane over iso bho is just effecient with big tubes and 1 can can handle 2oz roughly cause you want a ratio of abotu 1g to 8 - 10 mil of good product i think he could get away with 7 mil per gram which is like 2.5 oz with 1 can he can burn through a 2.5 lb ofit in 1 day and it would only be like 16 cans only takes me 20 min to load up a run and blast it 2 cans per run thats 8 runs and a total time of about 2:40min to 3 hours

ps each can is about 5.50 but come16 in a case for like 45 bucks vector that is

so 4 days 45 bucks each day for a ass ton of hash you do the math
 

corners

Well-Known Member
No need to use the oven. The butane will sterilize it
i suggest using 1inch and 1/2 copper pipe around 3 feet long its what i used i was able to put 2 cans of butane per through you may want to use a LARGE collection disk asthe 45 gram puck i got was plate sized and you can make concentrates and such i suggest doing like 2 pound runs a day and that way youll have done in 5 days

i got my 45 from qp of some fine buds that got alittle moldy during the curing so i heated via the oven for awhile kill the spores i then proceded to powder it all and blasted it

the hash i got was nice and blonde
 

azryda420

Active Member
You are either:
1. A teenager
2. A cali trendster
3. Someone who has never tried a multitude of different extracts, tinctures, and hash's
Fact: You're a bad guesser.

I have tried more hash that you will ever taste. I have a card..... AND I know how to make whatever I feel like. ISO flat out IS BOO BOO BOO BOO! Unless you can get super labcoat with it then ISO is NOT the way to go.
 

oakley1984

Well-Known Member
ISO has is the WORST product ever! lol

You are a complete idiot if you think ISO is better than BHO. Let alone he would have to have soooo much freaking rubbing alcohol. and all the dishes to evaporate it. Butane evaporates much faster and there won't be any clorophyll in it. Yes butane is costly and a lot of cans, but still better. With ten pounds of trim, he's be shaking jars and shit all day. Fuck that. Blast that shit.

ISO is stoopid if you ask me.

ISO oil taste like straight ass dude.

Take notice that ZERO cannabis clubs sell ISO product. And they NEVER have. They WOULD sell BHO but the feds don't like people blowing there sheds up.

ISO OIL = WORST HASH PRODUCT EVER!
so whats your opinion on this oil?
 

Attachments

Top