My kush grow show

apasunee

Well-Known Member
If this is your first time,, someone who has done this before must be helping out here,, this is a very involved and good set-up....good luck.....:peace:.........
 

KingTeg

Well-Known Member
If this is your first time,, someone who has done this before must be helping out here,, this is a very involved and good set-up....good luck.....:peace:.........
actually i planned and set up the whole thing. the only help i got was just with setting up the poly and with watering sometimes hahaha. its my first big grow show but i grew a plant all summer =) thanks dude
 

KingTeg

Well-Known Member
suzie looks nice...
yeah shes the oldest when i brought her in she was a good foot and a bit ahead of everything else lol

more along the lines of floral
i picked up an organic finisher today gunna do some research on it see if its any good cant remember the name of it right now :blsmoke:
i wanna look into gravity and purple maxx just to try it out see if it stacks and finishes nicely not sure if i will yet
 

krygor

Well-Known Member
Remember if they bust you, it was all for personal use. Oh, and they're tomatoes, organic tomatoes.
 

DrosForever

Active Member
Very Nice...Very Nice... It looks like the room is completly sealed off with the tape. Very cool.

Any problems with ventalation with all those lights?
Whats your budget look like on this grow?
What do you expect to yield? 5 to 15 lbs?

You definately did your research and planning.

Very cool, I like your whole setup. Will be watching until the end. Keep it up!
 

KingTeg

Well-Known Member
Very Nice...Very Nice... It looks like the room is completly sealed off with the tape. Very cool.

Any problems with ventalation with all those lights?
Whats your budget look like on this grow?
What do you expect to yield? 5 to 15 lbs?

You definately did your research and planning.

Very cool, I like your whole setup. Will be watching until the end. Keep it up!
yeah the room is completely sealed off it will help when flowering comes to keep the smell in and no smell leaks =)
i had problems before with ventalation because i was running about a 30 foot 4'' tubbing from my garage to the room. the air wasnt cold enough so i moved it to the side of the house for abit and that jus tseemed to heat because it was right beside the the hydro meter so i moved it into my back yard window so its direct nice and cold air. its so cold that cold water droplets form on my tubbing all the way to my intake fan lol
my budget was pretty much no limit and then i bought things as i needed them like the carbon filter which cost around 400$ i didnt need it till flowering so i bought everything i needed first =)
yeild im still not quiet to sure i know its gunna be alot higher because of my cathedral/stadium setup so basically all the bud from tops to bottom is premo useable bud =)
 

naturalhigh

Well-Known Member
i hope you have a plan...seems like you just have potted plants over mh light bulbs just hangin from the top....do you have a veg room? how tall are you going to veg them out befor flower? they dont look too big...what size pots are they in..?
 

KingTeg

Well-Known Member
i hope you have a plan...seems like you just have potted plants over mh light bulbs just hangin from the top....do you have a veg room? how tall are you going to veg them out befor flower? they dont look too big...what size pots are they in..?
i dont know but it looks pretty much planned out to me
actually theres 2mh and 2 hps
they are in flowering currently and they will stretch out
and they are in 5 gal. pots
i dont need a veg room because its just 1 show thats why theres a 130 plants in there
 

StopFckinSnitchin

Active Member
I love the setup. Great work. Just one thing to keep in mind when using washer/dryer outlets, they aren't gfci protected. Make sure you dont overload the branch circuit. You may need to calculate your VA load to see if it is safe. Residential overcurrent protection devices in your panel dont allow for much more then the "norm" of standard dryer,washer combos.
 

KingTeg

Well-Known Member
thanks man yeah i looked into that theres not enough amperage going thru the circuit to overload it made sure of that b4 i did it and all the ballasts are 240vs so less resistance
if im correct i think theres a 30 or 40amp fuse in it and the ballasts are only putting out around 4-6amps i think that one ill have to re check but im pretty sure im good =)

i had someone give me advice on it aswell and specifically said it would be ok to run
 

StopFckinSnitchin

Active Member
Having an NEC code book or knowing an electrician is almost essential when you're gettin into larger ops. Hate to see someone burn down their house. Not that I am questioning your knowledge, I just want any n everyone to keep it in mind for safety sake.. Best of luck to ya.
 

KingTeg

Well-Known Member
oh yeah for sure it helps a hell of a lot lol
but i did all the wiring of the ballasts and room myself that was pretty interesting hahahaha
but thanks alot man
 

daddychrisg

Well-Known Member
Quite a selection of weed plants you have there! I am going to guess right now, that you will yield 8.25lbs....GL
 
Top