my babies thriving w/ 14CFLs and one question...

Well I figured that it's time to give you all an update!

Things are going better than I had expected. All of the plants are doing great and have been in 12/12 for approx. 1-2 weeks now.

Here is the slow poke that I started the thread about. It just is dense as hell. I actually put this one back under 24hr lighting until it gets a little bigger. I have high hopes for this one:

IMG00001-20090416-2341.jpg


IMG00002-20090416-2341.jpg


Now this is the busiest plant that I have. I've tied it down trying to maximize light penetration.

IMG00003-20090416-2150.jpg


This one you can see where I've tied down the three branches hoping to promote more tops:

IMG00004-20090416-2151.jpg


This is the tallest one that I have. Before I tied it down it was about 16" tall:

IMG00005-20090416-2152.jpg


And the last one in the bigger pots, also tied down:

IMG00006-20090416-2152.jpg


And here are the two twins. I haven't started to tie them down yet...

IMG00007-20090416-2153.jpg



And here's the whole family!!!

IMG00009-20090416-2154.jpg


the last picture is of them at home where they belong:

IMG00010-20090416-2155.jpg



P.S. I've probably gone WAY overboard but I bought a new toy on eBay today!!

Is this going to be overkill in my little grow room I have setup?

HTGSupply_Dimpled_400_HPS_GALLERY_3.jpg
 
IMG00010-20090416-2155.jpg


If that picture shows your whole space than you might as well cancel that order because it is going to fry your plants. You shoulda did some more research man, you are going to have to spend a lot of money in order to make the temps in your box semi okay. Good luck though bro :???:
 
If that picture shows your whole space than you might as well cancel that order because it is going to fry your plants. You shoulda did some more research man, you are going to have to spend a lot of money in order to make the temps in your box semi okay. Good luck though bro :???:


I've got 36" wide x 18" deep x 48" tall. Here's how big it is:

IMG00014-20090416-2232.jpg


That shouldn't be too small should it? I currently have two fans built into the box. One fan pushing air out and the other towards the bottom pulling air inside.

Here's what the fan's look like. One is about twice the size the other one is though:

IMG00012-20090416-2230.jpg


And I tried to take a picture of the fans but the lights are too bright. But the top left one is the big fan blowing out and the bottom right in the smaller one pulling in fresh air:

IMG00013-20090416-2232.jpg
 
"In order for the heat produced by a light system not to harm the plant, a 250 watt light system should be started 18 to 30 inches above the tops of the plants, a 400 watt light system should be started 3 to 4 feet above the tops of the plants,
A 600 watt light system should be started 4 to 5 feet above the tops of the plants, a 1000 watt light system should be started 5 to 6 feet above the tops of the plants."

I found that here: https://www.rollitup.org/grow-journals/107903-k1ng5p4d3s-cardboard-box-grow-hehe-4.html

ACK! Looks like I need to change my order to a 250 watt instead. :(
 
My box is 54" tall, 36" wide, and 24" deep. I use a 250 watt HPS air cooled with a 306 CFM inline fan made by Active Air. My temps are around 78°F -80°F. I promise you that you will need to upgrade your ventilation because small computer fans just aren't gonna cut it. You might encounter some light bleaching too once the plants get big and get close to the lamp as well as straight burning of the tops. I personally would never put a 400 watt in a cab that size but that's your call. Good luck dude, you are probably going to need it :sad:
 
grrr I wrote and called HTG Supply and they still shipped the 400w light... Can I use a 250watt bulb in it to try and help with the heat and then maybe in the future upgrade to the 400 watter.


Suggestions?
 
You're probably going to either send it back to them once it arrives or shell out the extra money to cool it with a high powered exhaust fan
 
Weeeeeee. Well I woke up this morning and went to go check on my babies and guess what? The biggest bushiest one I have, show her sweet little female parts today!!!!!

pussy.jpg


On the other hand I had 3 turn out to be males too but they were actually the scraggly one.

balls.jpg



nuts.jpg



I am reading their sex correctly aren't I? :)


Damn, I think I resized them too small.... If the pics are too small someone just speak up and I'll redo them.

Thanks
 
Looks like you've got it right to me! Congrats on the big lady. They are all looking super happy - well done!
 
Guess what?? TWO MORE FEMALES!!!!:hump:

So far that's 3 males, 3 females, and one unknown.

I'm happy with just 3 females too. I was worried about what I would do if I had too many females for my cabinet.

I'm looking forward to seeing the buds starting to form!!:weed:
 
Still no answer so I'll post the question again.

I have a 400watt HPS system that is going to be arriving tomorrow in the mail. I'm wondering if I can switch out the 400w bulb with a 250 watt bulb and not suffer any problems.

Anyone? Thanks!!
 
Still no one has seen this fly before???


yup, i had several dozens in our greenhouse. they drastically reduced in number after i opened the doors to the greenhouse for several days and let in several small wasps (1/8" in size). they are now welcomed guests & let live there. i guess they ate them or scared them away.

here's a shot of one if you look closely on the upper left corner of the image

:)
 
I would not use a 250w bulb in a 400w ballast. I did this way back when and found out it can cause some serious electrical issues and possibly catch fire. So I would send the 400w system back and get a 250w or a 150w. Either way, it will make a big difference over the cfls I think!

Plants are coming nice.. grats on 3 ladys!
 
yup, i had several dozens in our greenhouse. they drastically reduced in number after i opened the doors to the greenhouse for several days and let in several small wasps (1/8" in size). they are now welcomed guests & let live there. i guess they ate them or scared them away.

here's a shot of one if you look closely on the upper left corner of the image

:)

Couldn't see the image but thanks for the info! Ever since I put the 400w HPS in there I have been keeping the cabinet doors open to keep the heat down and that's also helped with the flies.

hey post more pics of that odd one please! i'm verrrrrry interested in it!

7.jpg


2.jpg


I would not use a 250w bulb in a 400w ballast. I did this way back when and found out it can cause some serious electrical issues and possibly catch fire. So I would send the 400w system back and get a 250w or a 150w. Either way, it will make a big difference over the cfls I think!

Plants are coming nice.. grats on 3 ladys!

1.jpg


3.jpg


4.jpg


5.jpg


6.jpg
 
Guess what?!? The odd one turned out to be...... a....... FEMALE!!!!!!! WOOOHOOO!@#$

Anyways, I'm excited. I can't wait to see what the buds that this things produces is going to look like. It's probably going to be on big fat nugget. I can hope atleast. lol

And, I have a question. I know it was mentioned that maybe me having a 400w HPS in a small cabinet would cause 'bleaching'.

Is that what this is:

spotting.jpg


Thanks for all of the replies and help everyone. Really if it wasn't for this forum I wouldn't have even come close to making it this far.

This has somewhat turned into a grow journal but, oh well. :)
 
Back
Top