CHILL WINSTON! GG's escape to paradise!
- Thread starter ganjagoddess
- Start date
bettertoday55
Active Member
GG.....
first off this is my first scroll through this journal and might i say it makes me tingle. very nice work. i can't wait to see this all the way through. gl
edux10....
abou your temp problem with the light. i am not by any means an expert but from what i have read you are cutting off a lot of your air flow with all the drastic bends and turns in your tubing. my suggestion would be to try and find a way to have the least amount of bend as possible to see if that would help. again no expert but i think it is something like 60% of air flow is decreased with a 90 degree turn.
first off this is my first scroll through this journal and might i say it makes me tingle. very nice work. i can't wait to see this all the way through. gl
edux10....
abou your temp problem with the light. i am not by any means an expert but from what i have read you are cutting off a lot of your air flow with all the drastic bends and turns in your tubing. my suggestion would be to try and find a way to have the least amount of bend as possible to see if that would help. again no expert but i think it is something like 60% of air flow is decreased with a 90 degree turn.
DR. VonDankenstine
Well-Known Member
My shits tied in knots and no problems----GG has the shit down----Sit down!!!----shut up!!!-----and watch!!!-------you just might learn something from the girl
ceestyle
Well-Known Member
It is a fact that bending tubes reduces air flow. Ignore it if you want.My shits tied in knots and no problems----GG has the shit down----Sit down!!!----shut up!!!-----and watch!!!-------you just might learn something from the girl
Hey ganga goddess i got the same clip fan you got in them pics. hahah tight that lil guy is nefty and lets out pretty good air flow but hey check it get some wire cutters or something and clip that front grill those types of fans have been known to cause fires cuz the front grill puts to much restraint on the fan and and does let the motor cool down causin it to over heat and spark up trust me plus you will get a lil more airflow with just a straight fan intstead of a that grill all up in the way just lettin you kno cuz i kno everyone would hate for our gardens to go up in smoke. especially yours looks awesome. Blaz31 PEACE
CustomHydro
Well-Known Member
I know ur good GG, but how is this even possible??I can keep my temps at a perfect 79 degrees with NO AC runnin and 90 degree temps outside the house....
Edux, do u have a vent for the room itself. It looks like u are just venting the light, could just be the pics... That could be an issue and the bungee cord that is making your first ninety on the intake, it looks like it's choking the tube down to a 3inch instead of a 6inch, just let it flow on a more natural curve, and vent the room itself and u will be straight. You could get a cheap 6inch duct blower at Deep Homo for under $30. Use that to vent the light and use that vortex to vent the room
Last edited:
DR. VonDankenstine
Well-Known Member
Your 100% correct and thanks for the post but in certain situations you just have to have bends---I run an extra fan so I have one pulling from the front and one pushing from the rear--I would love to have straight runs but in my situation it would be close to impossible. Thanks
edux10
Well-Known Member
^^^ This is exactly what I learned over the past days. I have to pull cold air across my light. It works great now and my tent never gets above 83 degrees. I run lights at night so the air is cold night air. Works very very well, I had a crazy bend in the duct (you can see the pic a few pages back) so I had to shorten that and everything works great. The glass on my hood is actually cold. Where the light is its hot but it don't heat the room at all. Back to you GG...
ganjagoddess
Well-Known Member
air-cooled lights, Really good airflow, fans, and a aweseome air intake system.!
But with the plants in there it is actually running at 82-83 degrees with no ac.
ganjagoddess
Well-Known Member
Update:
The flood tables are done, and If I may say I am impressed by my own carpentry skills sometimes....
The flood tables are done, and If I may say I am impressed by my own carpentry skills sometimes....
ganjagoddess
Well-Known Member
Oh and here are the plants now under the big lights on 24/0 of lighting.
snoopdog621
Well-Known Member
this thread is amazin ... i dident kno its possible to do 400 plants under 3000 watts of light ... i be usein 3600 watts myself with led pannels and cfls ... amazin work i will certainly keep a eye on this one
HerbieSmith
Well-Known Member
haha or maybe barefoot 
Are you going to keep them in that size container the entire grow?
are the bags soliD plastic? if so how does the flood table get water to them?
Are you going to keep them in that size container the entire grow?
are the bags soliD plastic? if so how does the flood table get water to them?
ganjagoddess
Well-Known Member
No Mostly Barefooted, lol
Actually we can fit 196 under 1 1000 watt light in two of those tables, BUT... in the pictures I took, you only see 1 of the tables under the 1000 watt light, I have two more tables ready to go in, as soon as each plant fills the space of the pot, and then we will be thinning them out to only 50 plants on each table with 4 tables, and then when the males show there faces, it will most likely be going down to 25 plants on each table....
Yes, the size is 3/4 of a gallon gro bags, and they are not solid.haha or maybe barefoot
Are you going to keep them in that size container the entire grow?
are the bags soliD plastic? if so how does the flood table get water to them?
The tables act more as a water catcher, than a flood system, we are watering by hand for now, and a drip system will be set up soon.
Cheers, and thanks for your questions!!!
GG
ganjagoddess
Well-Known Member
OKAY!!! I dont know you, I dont know Caligrown... Why The Fuck is this being posted in my journal again?????
Do not post here anymore... K...