$$Cheap-chinese$$ diy led panels

[DiyKindaGuy]

Getting it done... soldering my chips together

★★★kushed_out★★★

 

[DiyKindaGuy]

Im loving the baseplates they give it the clean look

★★★kushed_out★★★

 

[DiyKindaGuy]

So this panel is starting to come together got most of the soldering done

★★★kushed_out★★★

 

[DiyKindaGuy]

This is what the finish panel should look like... it would have 36 warm white @3000k.... 16 cold white@6500k.... 16 neutral white@4500k... 16 red 660... 10 red 630.. 2 uv.. 2 ir

★★★kushed_out★★★

 

[DiyKindaGuy]

My files... need them for burring the panels from all the drilling

★★★kushed_out★★★

 

[DiyKindaGuy]

Top part of panel... which will house the fans and drivers

★★★kushed_out★★★

 

[DiyKindaGuy]

Checking to see how the fans look on...

★★★kushed_out★★★

 

[DiyKindaGuy]

Tapped all my holes for the plates..

★★★kushed_out★★★

 

[DiyKindaGuy]

Seeing how the bolts fit

★★★kushed_out★★★

 

[DiyKindaGuy]

The nuts are securing the first panel as i will be attaching the second panel soon

★★★kushed_out★★★

 

[DiyKindaGuy]

So this pretty much the skeleton... hope you can get an idea of what or how its coming together

★★★kushed_out★★★

 

[DiyKindaGuy]

Well imma take a smoke break... catch up on others journals/topics and call it a night here in canada... more to come tomorrow... more pics as well... eventually would like to do videos but im new to journals and tomorrow might be the day... not lol

★★★kushed_out★★★

 

[DiyKindaGuy]

Any questions or constructive feedback will be great appreciated... now to get kushed-out!!!

★★★kushed_out★★★

 

[caretak3r]

enjoying your build - I'm actually updating an old 4 spectrum red/blue 3w X 100 panel. Replacing all blues with 5000K white in order to account for my lack of height

 

[DiyKindaGuy]

enjoying your build - I'm actually updating an old 4 spectrum red/blue 3w X 100 panel. Replacing all blues with 5000K white in order to account for my lack of height

Right on hop on... have yu taken yur panel apart.. and do yu have pics... also what kind of power supply was used?? I really am liking the freedom to upgrade...rebuild and the baseplates allow for a clean look and easy to upgrade or exchange baseplates...

★★★kushed_out★★★

 

[DiyKindaGuy]

So i forgot to post the specs on the drivers.. the 12 led baseplate is powrred by a ten watt driver pushing 49.3 v and for the five led baseplates are getting the 4-5 x1watt driver pushing 24v and i only got one 1-3x1watt running 18v for the four led baseplates

★★★kushed_out★★★

 

[DiyKindaGuy]

Btw all the drivers are from ebay (chinese) thus even if they last one run it would have paid itself off on one crop of meds

★★★kushed_out★★★

 

[caretak3r]

Here's the thread:
https://www.rollitup.org/t/a-little-help-disecting-a-circa-2011-300w-led-panel-quantum-evader.648409/

 

[DiyKindaGuy]

So ive screwed down the baseplate to alluminum plate..

★★★kushed_out★★★

 

[DiyKindaGuy]

I also forgot to mention a bag of lens i got all mixed up i got 6..35... 60... degree lens

★★★kushed_out★★★