Hi all,

A friend of mine has a 8ftx8ftx8ft flowering room and is wondering the best way to vent this. The room is actually a walk in closet.

He plans on having 2x1000 watt hps with air cooled reflectors. These specifically
http://htgsupply.com/viewproduct.asp?productID=48332 .....plus both will have a Cooltube 8 Reflector.. (picture and description on previous links page towards bottom where options and upgrades are listed)

Also a GrowBright 8" Inline Fan and Charcoal filter combo will be used to hopefully cool the room and rid the room of any odor. Link - http://htgsupply.com/viewproduct.asp?productID=53961

He will be venting through the closet door by cutting holes in the door to place the connective ducting which will connect to the fan and lights. What is your opinion of the best way to vent this room successfully.

He was thinking the set up would look like this going from inside the room to out.... Carbon filter---->2 1000 watters ducting in between each---->Ducting---->GrowBright Inline fan 8"(which is connected to door) will suck the air out through the door and into the other room.

Will this be enough to rid the room of smell and also cool the lights enough?

He was thinking of adding an inline fan Growbright 6" high velocity fan pictured here http://htgsupply.com/viewproduct.asp?productID=52583 to cool the room if need be. Just trying to save money if at all possible.

If i need to be more clear with my explanation of the room or idea of how to vent please let me know.

Thanks for all your help in advance. Happy 420

Please does anyone have any advice?

bump bump bump for this thread. I really would appreciate the opinions of others as my friend hopes to do this all the right way

replace to door with a piece of plywwod or get another door so that byou can cut two holes in it 1 for intake and the other for exaust.

__________________
09 outdoor permalink6thindoorpermalink
EVERONE IS ALWAYS SAYING TO ME WHAT CAN I DO TO BE MORE LIKE YOU

Thanks for the reply. Thats is his plan. Buy a new door at home depot and replace the current one. Cut two holes in it. If he has that one inline fan pictured in the link about with the carbon filter, could he rig the system the way i mentioned above?

no, no, no fan bad. loud, noisy, your $ is really high for the quality. HTG will sell great carbon filters, buy this fan on Ebay http://cgi.ebay.com/Soler-Palau-TD200-8-Inline-Duct-Exhaust-Fan-S-P_W0QQitemZ390038445869QQcmdZViewItemQQptZLH_Defau ltDomain_0?hash=item390038445869&_trksid=p3286.c0. m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240% 3A1318|301%3A1|293%3A1|294%3A50

its been on high times for a long time now, i have 2 they are great, quite, powerful.

other than that so long as the ducting run isn't full of bends or of extreme length it will work.

__________________
get to know what you don't know.

http://www.rollitup.org/grow-journal...g-cabinet.html

but follow the instructions if you get it.

__________________
get to know what you don't know.

http://www.rollitup.org/grow-journal...g-cabinet.html

thanks for the input. i was just trying to get a package deal that came with the carbon filter and the fan so it would be a little less expensive. do you know any good sites that have nice packages. Also, do as long as the ducting doesnt have any bends, the set up listed above should work? thanks again for your help.