Page 17 of 29 FirstFirst ... 71516171819 27 ... LastLast
Results 161 to 170 of 289
Like Tree31Likes
DWC/ Bubbleponics

Why yes please put cheese on that! Blue Cheese clone DWC Bucket Grow - Ask away.

in the

Hydroponics / Aeroponics

forums; Originally Posted by firsttimeARE I was thinking of a design for scrog buckets thats not like drgreentms setup cause he's ...
  1. #161
    Able To Roll A Joint Able to roll a joint mxks1987's Avatar
    Join Date
    Apr 2012

    Posts
    63

    Default

    Quote Originally Posted by firsttimeARE View Post
    I was thinking of a design for scrog buckets thats not like drgreentms setup cause he's limited to having the plants in a box to hold the screen up.

    I was looking at these plant holders and the way they were designed gave me an idea of extending the diameter 200% around the bucket and being supported by these stakes that angle in to the outter perimeter of the bucket around the bucket. This way they are essentially an extension of the bucket and fastened to the lid. This would be sturdy and would allow for lifting of the lids to do typical maintenance/readings.

    I wish I had a welder.
    ++ rep for this one firsttimeARE. It seems similiar to this video I have seen with dwc tomatoes and builing a treluse into the lid. could probly solder the wire together.

  2. #162
    Veteran Smoker Mr. Ganja
    Join Date
    Oct 2011

    Posts
    1,799

    Default

    Quote Originally Posted by firsttimeARE View Post
    I was thinking of a design for scrog buckets thats not like drgreentms setup cause he's limited to having the plants in a box to hold the screen up.

    I was looking at these plant holders and the way they were designed gave me an idea of extending the diameter 200% around the bucket and being supported by these stakes that angle in to the outter perimeter of the bucket around the bucket. This way they are essentially an extension of the bucket and fastened to the lid. This would be sturdy and would allow for lifting of the lids to do typical maintenance/readings.

    I wish I had a welder.
    Yes that would work for me with a 3'x3' or so screen at the top. It would have to be able to move up with the lid and the plant so if need be I can change out bucket or just check/add water.

  3. #163
    Stoner Stoner Bigz2277's Avatar
    Join Date
    Jan 2012

    Location
    Pacific Northwest
    Posts
    978

    Default

    http://www.cannaversity.com/cannaver...7&action=print
    I going to build one of these, or something close to it.
    http://www.rollitup.org/dwc-bubblepo...ml#post7845912
    I am a new grower so by no means a pro. If i post something wrong do not bash me, politely correct me and you might earn some rep. Avatar by BigBuddahCheese

  4. #164
    Able To Roll A Joint Able to roll a joint mxks1987's Avatar
    Join Date
    Apr 2012

    Posts
    63

    Default

    I wish i would have done more research before I started or at least discover this site. lol.

  5. #165
    Veteran Smoker Mr. Ganja
    Join Date
    Oct 2011

    Posts
    1,799

    Default

    Quote Originally Posted by Bigz2277 View Post
    http://www.cannaversity.com/cannaver...7&action=print
    I going to build one of these, or something close to it.
    Yes I have seen that too, I just need something like that for 2.5 gallon buckets. I haven't spent too much time on trying to find a way to do it, imagine it wouldn't be too difficult but I like the PVC and netting there.

    If I was that guy I would added an access/visual hole that can be capped for adding water or just looking in for water level.
    Last edited by BigBuddahCheese; 05-03-2012 at 09:22 AM.

  6. #166
    Veteran Smoker Mr. Ganja
    Join Date
    Oct 2011

    Posts
    1,799

    Default

    Whoa I fell off the first page so either DWC forums are rocking or I am not posting enough in my own thread.

    So here is a bonus harvest shots of my Sugar Black Rose (SBR).

    I did harvest the last SBR early so I let this one run until I thought it was done. This one had a golden tinge and the leaves were all yellow, look back at the last shots of my SBR that is the one I am documenting now. This plant was about 3.5 feet tall nice generous rock solid buds, I kid you not each one weighs about 1 gram to 2.9 grams each.. and there is a lot of em just solid as a semi-erect man dong. Wow where did that come from.. lol shit I am obviously sampling a bit early on this stuff and its more tasty and potent even this early stage. I obviously didn't let my last plant run enough time as this one was a totaly different looking plant at the end then when I harvested last time.

    Now I dried this for 2 days in my 4 day dryer that rocks search the forums its awesome, then I bagged them for a day in paper bags moisture them out and then back in dryer for day. NOW in the glass jars, now these are a bit more wet then usual as I am again trying something new. I want to like simmer these buds in glass with higher then normal humidity but not much around 70% now and easily downing them per few hours over next days to let them "stink it up throughout" the bud.

    I usually dried for 4 days in bud dryer then pop them into jars with hygrometers and monitor the relative humidity(RH) to stabilize at 55-60% RH. Usually pretty close by the end of the 4 days in dryer, and just burp them couple times next day or two. I think I am gonna try for a burnable more sticky moisture bud here, not sure if I know what I am looking for but I am going to try it out.

    Here is the jars now slowly simmmer burping lol. (sorry android phone pics)

    IMAG0021.jpg

    IMAG0025.jpg

    Some nugs each are rock solid and gram or better most nearing 2+ very nice yields almost as good as bubblegum.

    IMAG0028.jpg

    Enjoy:


  7. #167
    Stoner Stoner Bigz2277's Avatar
    Join Date
    Jan 2012

    Location
    Pacific Northwest
    Posts
    978

    Default

    nice looking bud there man ^_^
    http://www.rollitup.org/dwc-bubblepo...ml#post7845912
    I am a new grower so by no means a pro. If i post something wrong do not bash me, politely correct me and you might earn some rep. Avatar by BigBuddahCheese

  8. #168
    Able To Roll A Joint Able to roll a joint mxks1987's Avatar
    Join Date
    Apr 2012

    Posts
    63

    Default

    Looks Great! You can really cut down and dry to finish in 4 days? Some people they have had to wait a week if not longer and i was kind of disappointed but 4 days is better.

  9. #169
    Veteran Smoker Mr. Ganja
    Join Date
    Oct 2011

    Posts
    1,799

    Default

    Quote Originally Posted by mxks1987 View Post
    Looks Great! You can really cut down and dry to finish in 4 days? Some people they have had to wait a week if not longer and i was kind of disappointed but 4 days is better.
    4 days till jarring.. that's around 60ish RH inside the jars so burping takes place until it gets to 58-60RH. You can smoke em at 4 days but couple weeks in jars burping brings em up to par. Then they sit in jars till ready curing, so no not really 4 days but it beats the 7-10 I use to dry em at, with absolutely no compromise with taste, smoke etc.

  10. #170
    Veteran Smoker Mr. Ganja
    Join Date
    Oct 2011

    Posts
    1,799

    Default

    Good Sunday, now that RIU paid their domain bill (I think I've seen it all) we can try to finish this before something else happens here, lol.

    We are gonna go to bud church this morning and take a bud trip around the garden to show you what is what, and when.

    First up the BubbleGum that is at about 60 days now and plumping up like a chubby school girl. I can't stress enough about the yields from BG, its a very giving plant. Leaves are all yellow, and just waiting for my golden tinge I have read about. They are almost like a greyish now, which is all cloudy ready to start to turn. Furtherest I ever taken BG and wish I had done it long time ago, sigh.

    bg_01.jpgbg_02.jpg

    Here is couple of the Agent Orange at 65 days right now. I have the more Satvia pheno so buds are like my Super Lemon Haze, not a great yield but the buds and the smell are amazing. This one is suppose to be the better medicine of the two, but less yield. I am excited it has some weird looking buds like almost flattish in growth. They are covered in resin almost like sugar coating everywhere.

    ao_01.jpgao_02.jpg

    BlueCheese at 44 days so heavy and dense, its sick. I lift the lid on this 2.5 gallon pot and it takes two hands where all the other strains even the huge AO and SLH can be lifted with one. This is just a fat nug bitch.. I can't wait to see it at finish.

    bc_01.jpgbc_02.jpg

    Sage and Sour at day 34 just a beautiful plant, the nugs are all the same size and uniform its crazy. It stays low, squatty and bushy with not much stretch I hope the smoke is good as it looks like a definite must run in the garden. Easy to clone, grow and lst.

    sns_01.jpgsns_02.jpg

    Parting shot of the Hempy bucket Permafrost I have running at 30 some days to see how Hempys run. So far easy as pie, water 2-3 days and they are good. Same hydro mix I run in my buckets, although not the size and growth of the DWC but its a good alternative with out the mess of pumps, air lines etc. Same age as the SageNSour.

    pf_01.jpg

    Peace next time I probably be harvesting the BubbleGum I see it not having much more then 5-7 days, followed by SLH, AO, BC and BG#2 in the following few weeks.

Page 17 of 29 FirstFirst ... 71516171819 27 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •