Page 1 of 2 12 LastLast
Results 1 to 10 of 11
DWC/ Bubbleponics

Best method of getting your bubbles

in the

Hydroponics / Aeroponics

forums; I'm trying to figure out the best method for bubbles, as in types of wands and what not, whats the ...
  1. #1
    Stranger Stranger Chroniccardude's Avatar
    Join Date
    Sep 2009

    Location
    Illinios
    Posts
    12

    Default Best method of getting your bubbles

    I'm trying to figure out the best method for bubbles, as in types of wands and what not, whats the overall best, and is the such thing as to many bubbles? i was pretty sure there wasn't but had to ask

  2. #2
    Able To Roll A Joint Able to roll a joint stonedar's Avatar
    Join Date
    Aug 2009

    Posts
    96

    Default

    some people like to buy the cheapest air-stone they can find, they get dirty you can just through them out. I buy the hose type or make my own. They clean easier.
    http://www.4hydroponics.com/grow_roo...leAirstone.asp

    good question though I'll be interested in others ideas as well
    spaghnum is a dirty word

  3. #3
    Mr.Ganja Mr. Ganja stumps's Avatar
    Join Date
    Jun 2008

    Posts
    4,622

    Default

    I use the cheep bubble stones form wall mart or any pet store. I like the bubbles they put out better then the wands.

  4. #4
    Stranger Stranger Chroniccardude's Avatar
    Join Date
    Sep 2009

    Location
    Illinios
    Posts
    12

    Default

    so the stones work better than the wands? and is there any amount of bubbling that is to much?

  5. #5
    Mr.Ganja Mr. Ganja stumps's Avatar
    Join Date
    Jun 2008

    Posts
    4,622

    Default

    I think so. I'm useing two of thr 4" in a 5 gal bucket,

  6. #6
    Marijuana Toker Marijuana Toker
    Join Date
    Mar 2009

    Posts
    155

    Default

    Quote Originally Posted by stumps View Post
    I think so. I'm useing two of thr 4" in a 5 gal bucket,
    i thought it would be more about what the pump puts out?

  7. #7
    Able To Roll A Joint Able to roll a joint omkara's Avatar
    Join Date
    Jun 2009

    Location
    L.A. Southern California
    Posts
    69

    Default

    Quote Originally Posted by PotHead3 View Post
    i thought it would be more about what the pump puts out?

    True... when I first built my dwc I was using a 10 gal pump I had from an old fish tank. I noticed my girls were not growing as fast as they should so I purchased a 40 gal whisper pump and the girls perked up big time!

    "What is thy bidding, my Master Kush?"
    -DarthCultivader

  8. #8
    Illegal Smile
    Guest

    Default

    I use 4 12 inch airstones, the kind that are stone all around not inlaid in plastc, they are sort of triangular shaped. I get mine at Meijer. I run a line to each from a 600 gal/hr pump. I get lots of bubbles, the more the better. When I'm starting seedings I set water level an inch below the bottom of the netpots. The bubble action wets them more than halfway up, eliminating the need for drips, feeder tubes or top feeding. This is the real bubbleponics. By the way, with my current grow I shifted from rockwool to rapid rooters. The RRs gather and hold water so well, I was worried about drowning seedlings not about top feeding them. I lowered my water level by a gallon and monitored until I had the netpots being watered to the extend I wanted. I check the netpots and the airstones daily to see all is well.

  9. #9
    Mr.Ganja Mr. Ganja stumps's Avatar
    Join Date
    Jun 2008

    Posts
    4,622

    Default

    Quote Originally Posted by PotHead3 View Post
    i thought it would be more about what the pump puts out?
    I agree. for the pumps I have. The stones do better then the wands.

  10. #10
    Teaching How To Roll Mr. Ganja TheConstantGardner's Avatar
    Join Date
    Feb 2007

    Posts
    1,435

    Default

    My best DWC grows were when I made my own airstones (got tired of replacing blue stones every grow)

    3/4" PVC pipe cut to length, put some steel ball bearings inside (so it wouldn't float), and capped at both ends.

    Made my air holes with a small needle attached to a 45w soldering iron.

    Drilled a hole in the end cap, siliconed in a nipple, attached the hose, and presto. Tons of bubbles!

Page 1 of 2 12 LastLast

Similar Threads

  1. Good SCROG bible
    By newgrowerguys in forum Newbie Central
    Replies: 51
    Last Post: 03-17-2013, 04:55 PM
  2. <<How To Grow Magic Mushrooms>>
    By patchwayraver in forum General Marijuana Growing
    Replies: 20
    Last Post: 11-03-2012, 04:11 PM
  3. Former DWC'ers beware! Large bubbles for Tea!
    By dirt clean in forum Organics
    Replies: 6
    Last Post: 09-23-2009, 06:44 PM
  4. Okay, new set of questions in preparation for a SOG attempt.
    By Traxxe in forum General Marijuana Growing
    Replies: 7
    Last Post: 09-18-2009, 07:50 AM
  5. Smokinrav's simple water-cloning method
    By mogie in forum General Marijuana Growing
    Replies: 3
    Last Post: 12-12-2007, 05:31 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •