How to Make Tincture Oil

**ismokealotofpot** · 10-26-2011, 10:41 PM

I am about to explain how to make a safe non toxic tincture oil. I do not condone the use of illegal drugs. If you are not qualified or permitted to use cannabis this post is not for you. First you will need two nonporous glass bowls,one pair of bleached and washed white nylons, a solvent(I do not use petroleum based solvents because of toxicity issues)one spoon,a fan,extra virgin olive oil and a glass bottle. We will be using a stove top cooking method for the final product.First thing is to place dry bud, leaves or clippings in a small nonporous bowl then add the solvent.The solvent I use is 91% isopropyl alcohol.Its important to have as pure of an alcohol as possible 50 or 70% will not work because you will end up with 50 or 30% water in the end.n

**ismokealotofpot** · 10-26-2011, 10:42 PM

Allow the leaves to soak for about 10 to 15 minutes stirring and crushing the leaves helps break down the oils. Then wring out the liquid with your hand and discard the leaves. Repeat this process with a fresh batch of dry buds or leaves to make a concentrated solution.
Attached Thumbnails

**ismokealotofpot** · 10-26-2011, 10:42 PM

Next step is to place the bowl in the nylon stocking and strain of the solution into a bigger nonporous glass bowl then stretch the next stocking over the large bowl and place in front of a fan the stocking will keep debris from contaminating the solution. By rotating and moving the bowl around you can spread the solution over a larger surface area to aid in the evaporation process.
Attached Thumbnails

**ismokealotofpot** · 10-26-2011, 10:43 PM

After the evaporation you will end up with 9% water this is toxic water so do not include it in your tincture dump it out all cannabis oils will stick to the sides of the bowl. The remaining water can be removed by wicking out with a paper towel. Then simply take your finger or a spoon and collect the oils.
Attached Thumbnails

**ismokealotofpot** · 10-26-2011, 10:43 PM

Next I will use a small 3.5 oz bottle and 6 grams of chilled cannabis oil then fill the bottle with extra virgin olive oil be sure to leave space for expansion. Bring a pan of water to a boil then reduce to a simmer. Then place the bottle of oil in the simmering pan.
Attached Thumbnails

**ismokealotofpot** · 10-26-2011, 10:44 PM

What we are looking for now is a lava lamp action the oils will begin to rise to the top this could take 15 minutes or so do not increase the heat. When this happens pull the bottle out of the pan dry it off and shake it vigorously for about five minutes. Place it back in the pan of simmering water.watch for small bubbles rising to the surface.
Attached Thumbnails

**ismokealotofpot** · 10-26-2011, 10:44 PM

After you see the small bubbles and a darker color its done DO NOT OVER COOK.This tincture can be strained through the nylon once more to eliminate any oils that do not infuse although potency may decrease a bit. This is very strong stuff and I do not recommend taking more than one teaspoon at a time. 3.5 oz = 21 teaspoons or 21 doses. Dont be the first guy to die from thc.